How do i re-install quicktime and get itunes working again??

my brother accidently deleted quicktime off our computer not realising what it was, and now itunes wont work, it says that quicktime cannot be found and so that itunes has to be re-installed. then i somehow re-installed quicktime, however itunes still wouldnt work, and came up with the same message, so i completley deleted quicktime, itunes and everything to do with my ipod, and tryed to re-install it, however it wouldnt re-install, and so i dont no what to do! can someone please help, because i donnt have a clue what to do now!!! please!!

it is unanswered because the comment hasnt solved my
question
Hi helpimstuck!
It could be that when your original quicktime was removed it was not removed completely. I would try to install QT again then look for it in Add/Remove programmes. Try to repair if you get given the option, or if not try removing again.
Then, download the standalone QT to your desktop. Switch off antivirus and spy software and try a fresh install of QT. See if it works then.
Local retailer custom built pc. Pentium 4 chip 2.4GHz   Windows XP  

Similar Messages

  • HT201210 I was updating my itunes on my ipad from my pc and my ipad has now shut down and shows a lock with arrow leading to itunes on screen. How do i unlock my ipad and get it working again?

    I was updating itunes on to my ipad from my pc and now my ipad has shut down and shows a lock with an arrow pointing to itunes. How do I unlock my ipad and get it back to working again?

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then... see Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note.  Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

  • Firefox 5 has lost all my chrome tab's and capabilities which came with 4? how do I un install 5 and get back to my version 4?

    firefox 5 has lost all my chrome tab's and capabilities which came with FF4? how do I un install 5 and get back to my version 4 & retain all my bookmarks at least I's also like to retrieve my Chrome capabilities as well?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • Error while installing quicktime and/or Itunes, please help.

    Okay, it all started when I tried to update Itunes, while installing the new Itunes an error came, so I had to uninstall it all and reinstall. However, now whenever I try to reinstall quicktime, it gives this error.
    The path uninstall quicktime for the map contains an invalid character.
    However, it doesn't even specifiy which map, anyone has an idea how to solve this problem?
    Regards, Jelmew

    Anyone please? Not being able to use my ipod is very annoying.

  • How do i get iTunes working again?

    I am running windows 7 64-bit on my PC and recently I have had problems with iTunes.
    When I click on the iTunes icon, it shows, that it is loading just for a split of a second and iTunes won't open. It only opens in safe mode.
    A few days ago I installed TuneUp utilities and run maintenance on my PC, the program suggested some changes and I did them, cleaned my computer and after that iTunes just won't open. So I could really use some help as I have tried everything that was offered on support page.
    Thank you in advance

    Doublechecking ... you've worked through the following document?
    iTunes: Troubleshooting issues with third-party iTunes plug-ins

  • My email program keeps freezing on my iPad 3 , how do I force quit and get it working?

    MMy iPad 3 mail program keeps freezing , how do I unfreze force quit and get it working?

    You can force quit any program on iOS by double tapping the home button. This should bring up a swipe-able panel of all of the apps currently running. Simply swipe up on any app you want to close.
    As an aside, all of the apps on this panel are backgrounded to some extent (i.e. waiting for you to come back) and are using some system resources. On older devices you may want to keep an eye on how many are there because it can be a performance drain. I've personally had this issue.

  • My Quicktime will not open, and therefore when I try to play a video I get a message saying I need to download Quicktime, but I cannot do that as when I try, I get a message saying I already have it.  How do I un-install Quicktime so I can re-install it?

    I am having issues with Quicktime.  It would not open, so I tried to "delete" it and re-intall.  When I did that, it would not let me install it and I got a message saying it could not install because I already had it.
    So, I guess what I need to know is how do I un-install Quicktime (even though the icon is gone) and then re-install it.
    Thanks!

    Yes I had that problem this week.  Did search in finder and dragged all files to trash,including any attempted down loads of updated quicktime, emptied, restarted and then down loaded latest version and all ok.

  • When I try to install QuickTime, I get the message "newer version is already installed". How can I do?

    When I try to install QuickTime, I get the message "newer version of QuickTime already installed". I uninstalled QuickTime. I have also gone into the registry and deleted all references regarding QuickTime. I really don't want to have to reinstall Windows just to be able to install QuickTime. I have used QuickTime for years and want to use it again. What do you suggest I do?

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up").
    In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

  • Elements 11 totorial ask for quicktime to view the progarm, I installed quicktime and it gives me an error 2048 to view it

    elements 11 totorial ask for quicktime to view the progarm, I installed quicktime and it gives me an error 2048 to view it.

    SadisticIron wrote:
    i just baught my first iphone and it is a jalbroken
    Buzz! Thank you for playing!
    Discussing jailbroken devices is forbidden here by the Terms of Service.
    You can not get help here.

  • HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed?  i never had this problem before.  if i do this will i loose all my files, music, etc?

    When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install.  if i do this will i loose my files and music?

    No, you should not lose anything.

  • How to monitor OSD TS failure and get alert or report?

    How to monitor OSD TS failure and get some alert or generate an report?
    We have SCCM 2012 R2 CU1 with MDT 2013.
    I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
    (I thinking of "Task Sequence - Deployment Status" reports)
    I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
    We do have SCOM, SCSM, SCO.
    Is there anyone that can point what way or what option I have?
    /SaiTech

    Specifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
    select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
    as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
    Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
    If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
    logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
    There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
    Cheers
    Damon

  • How do you un-install Lion and go back to Leopard?

    How do I un-install Lion and return to  Leopard?

    I believe you mean to return to Snow Leopard:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • Exit Code: 6 - I can' install Indesign and get the following error mssages.

    Exit Code: 6 - I can' install Indesign and get the following error mssages.
    It is part of Creative Suite 5.5 Premium
    I have uninstalled many times and re-installed - to no evail.
    Could I have a hardware problem? Any help wold be apreciated
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s), 13 warning(s)
    WARNING: DW065: Display requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}
    WARNING: DW065: Display requirements not met for {857CC5F0-040E-1016-A173-D55ADD80C260}
    WARNING: DW065: Display requirements not met for {50509A36-0291-1016-9CCF-FC05E9E55550}
    WARNING: DW065: Display requirements not met for {92D5E8D4-01C8-1016-BBA8-F308D6BFCAC5}
    WARNING: DW065: Display requirements not met for {C041EC47-0253-1016-891E-E5DE4AB922FC}
    WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
    ----------- Payload: {75506BF3-0597-1016-8D09-EFDCD9BFC7FB} Adobe InDesign CS5.5 Common Base Files 7.5.0.0 -----------
    WARNING: Failed to update the csu inventory for {75506BF3-0597-1016-8D09-EFDCD9BFC7FB} Adobe InDesign CS5.5 Common Base Files 7.5.0.0 return values 12:114
    ----------- Payload: {CBBBB5DB-8EF3-40D7-A9FE-5A69100C1EED} Adobe ReviewPanel CS5.5 3.0.0.0 -----------
    WARNING: Failed to update the csu inventory for {CBBBB5DB-8EF3-40D7-A9FE-5A69100C1EED} Adobe ReviewPanel CS5.5 3.0.0.0 return values 12:114
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - AdobeHelp: Install failed

    WARNING: DW065: Display requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}
    What more needs saying? Your screen resolution is too small.
    Mylenium

  • TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

    I have an iPhone 3GS and was trying to restore it...
    Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
    Any ideas on how to get it working again?

    This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier.  It will now accept a SIM card only from that carrier.
    Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking.  Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

  • What is the best way to enlarge a part of a photo in lightroom?  How much cn you enlarge it and get

    what is the best way to enlarge a part of a photo in lightroom?  How much cn you enlarge it and get an acceptable result?

    The way I would do it would be to crop the image so that it only displays what you want, then export that image and specify the dimensions. You will have to experiment with different export sizes to determine what would be acceptable for your situation. You might be more forgiving or more demanding than anyone who would venture to answer that question. That's the nice part about digital photography; you can experiment to your heart's content until you get the result you are looking for.

Maybe you are looking for

  • Complaint wth ref. to invoice in CRM - Copy control not taken into account!

    Hi all, We are facing problems when replicating return orders (business object Complaint)  with reference to invoices in ERP. The copy control in ERP is not taken into account. Does anyone know if it is possible to check the copy control when replica

  • Ipod won't sync with itunes...songs dissapear after disconnect

    Everytime I connect my ipod and add news songs that I've just imported. It goes fine and normally until I disconnect. After I check my ipod after I disconnect, none of the new songs are there. can anyone help? thanks. Intel thinkpad   Windows XP  

  • ITunes is installed but won't open

    I just installed iTunes 6.0 and after restarting my computer I tried to open iTunes and a window poped up and immediatly closed. It looks like it has an 'Accept' or 'Decline' option but it closes before I can do anything. I tried re-installing, un-in

  • Automating indesign

    Hi, I am new to Indesign scripting. I have developed a tool using VB.NET for automating word, for exporting text to a Word document and changing styles in it. Similarily, I want to export data to an Indesign Document. I want to know, what are the req

  • Error While loading data from 8 DSOname to Cube.

    Hi All, while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull. Thanks and Regards, santosh.