How do I re-upload my HD from a Disk Image

I recently had some issues with my Mac Book Pro and I had to delete my entire Hard Drive. Using Disk Utility I backed it up first by taking a disk image of it all. I fixed my computer and now I am trying to work out how I can re-install my Hard Drive.
I open up the disk image, which takes hours to verfiy because there is so much stuff on it, and all my stuff is there. However, it doesn't update my computer to be how it was before and also it doesn't stay there, acting more like an external drive, so when I turn off my computer and then on again I need to go through the whole verifcation process.
Can anyone help me out here and show me how to use this disk image to go back to how my computer was set up, please?

OK great. Thing is when I try to I keep getting the message: Could not unmount volume "/" (Resource busy)
What am I doing wrong?
I

Similar Messages

How to make a pattern in illustrator from a placed image ?

how to make a pattern in illustrator from a placed image ?

Just embed the image and make a swatch of it.

DVD burned from a disk image won't work on different computers???

Under the directions for how to burn a DVD from an disk image, the Apple Help document (http://docs.info.apple.com/article.html?artnum=93006) says this:
"Note: When burning a disc from a disk image, the burned disc will have the same format as the disk image. If you need a disc that will work on different computers, burn the disc in the Finder."
Does this mean that the DVDs that I am burning from the disk image won't be able to be played on a PC? a Mac other than mine? Neither? WHAT? I am planning to sell the DVDs of a workshop I present -- to people who may be playing them on PCs. Should I not be using this method (burning from a disk image) to burn my DVDs?
PowerBook G4 Mac OS X (10.4.9)

Under the directions for how to burn a DVD from an
disk image, the Apple Help document
(http://docs.info.apple.com/article.html?artnum=93006)
says this:
"Note: When burning a disc from a disk image, the
burned disc will have the same format as the disk
image. If you need a disc that will work on different
computers, burn the disc in the Finder."
Does this mean that the DVDs that I am burning from
the disk image won't be able to be played on a PC? a
Mac other than mine? Neither? WHAT? I am planning to
sell the DVDs of a workshop I present -- to people
who may be playing them on PCs. Should I not be using
this method (burning from a disk image) to burn my
DVDs?
Video DVDs are in the UDF format. The disk image you created is in the UDF format. When you use Disk Utility to burn the disk image to writable media, the new discs will be in UDF format and all will be well.
You are doing things correctly.
BTW, unless you have an external burner with lots of cooling, if you expect to use the burner in your Mac (which DOESN'T have lots of cooling), it's a good idea to pause between discs to allow the burner to cool down. (BTW, this comment is based on the reported results of several people in the forum. If you don't allow the cool down timer, you will start to create 'bad' discs. Also it is VERY important that you reduce the burn speed in Disk Utility to 4x or lower in order to create discs with maximum compatability with players. (You should see a way to change the speed in Disk Utility afterr you have inserted a disc.)
F Shippey

Installing OS from a disk image

Hi,
I have quite a few systems that I need to rebuild. I've burned disk images of all the apps we need, onto a FW800 drive which has really sped things up. One thing I can't figure out though, is how to install the OS from a disk image. Each of these systems are getting a fresh hard drive with no OS installed. Booting off the install DVD works fine with fresh drives, but how does one boot into a FW800 drive with a disk image of the install DVD?
I thought cmd-opt-shift-delete was the key stroke for this, but it doesn't work for these systems, can anyone help out?
These systems are a combination of Leopard and Snow Leopard and are all Mac Pro's from the 2006-2007 to the early 2009 models.
Thanks
Stuart

Cool, thanks, I was kind of thinking along those lines, but couldn't quite put my finger on it/figure it out, that makes sense, appreciate it.
Thanks again for quick reply,
Stuart

Reliability of restoring from a disk image vs from a "normal" backup file

How would you rate the reliability of restoring your data from a disk image file (a sparseimage file, in this case/question) versus from a 'normal' file, e.g. one created by the Backup 3 app?
I read a few discussions here that mention corrupted disk image files...that result in a total loss of data...as opposed to other types of backup files, in which individual files, or folders, could be corruputed.
For some context: my ultimate goal is (a) to create reliable backup files, e.g. in folders in my Home Folder, stored on an external disk drive, and (b) to secure that data.
Thanks to Niel, in a prior discussion, I discovered that I could create a sparseimage file on the Lacie (encrypted).
http://discussions.apple.com/thread.jspa?threadID=763337&tstart=0
I could then select that secured file as the target / destination for the backup file/s I'm creating with the Backup 3 app. When I log out, that file is locked tight.
But is this 'elegant' solution for backing up data "reliable" when I'll need it at 3am on that dark day when...?
Many thanks.
- David
words to help others' search:
BU3; sparse image;
MBP 15" Core 2 Duo | LaCie d2 250GB ext Mac OS X (10.4.8)

I keep both images of my boot volume which is just OS and apps, and of my home directory. But I also have full regular backups as well. It is not "either or" but a matter of having backup sets that will work. And rotating those sets.
A daily backup, weekly, and monthly. That could require 3 or even 7 or more. Or partitions. But definitely more than one disk drive.
One disk drive backup set should always be safely off line when making a backup set.
Just as I have a clone of the system, an emergency boot drive, and one backup of the last OS revision.
You have to change sparseimage to dmg if you hope to use Apple Disk Utility Restore, especially if you are working from DVD and not from a hard drive.
I've used DU restore and SuperDuper and never seen or suffered a problem or corruption. But I zero drives before use.

Firefox won't insall into my applications folder. Says can't install because libsmime3.dylib is in use. I am running Mac Os 10.6.7 on a Macbook Pro. I can run firefox okay from the disk image but just won't install into the apps folder.

My system is a Macbook Pro running Mac Os 10.6.7 with a 2.8 GHz Intel Core 2 duo processor with 4 GB 1067 MHz DDR3 ram. The upgrade downloads fine, but when I try to drag the firefox image onto my appication folder, I get a dialogue box that says...Cannot install application because "libsmime3.dylib" is in use. I can run Firefox fine from the disk image.

Nope---didn't work. I've owned Macs for about 12 years so although I am brain dead on some things, I do have a working knowledge on most things. I only say that to say this--I did try holding down the mouse and choosing empty trash. It asks if I want to permanently delete what's in there. I say yes--and then I get the same identical message again-----'The operation can't be completed because the item "Firefox 8.0.1.dmg" is in use I can then click stop, or continue.' So apparently that complains the same way it does if I click it up on the menu :)))
As for item owned by---that's not an issue and isn't coming up. User is not a problem either as I am the only user on this system. There is only ONE file in my trash at the moment at that is this dmg file. Nothing Mac. Nothing owned by anyone other than Firefox. The problem seems to be that the dmg file and the original 4.0 FF file are working in tandem with each other--even though I have already drug the new 8.0 globe into the Apps folder and it updated the FF app with the new stuff. If I could force the dmg file to go away, I would do so, but at every turn the system is telling me it can't be done because it seems to think that dmg file is in use---even though everything is shut down and/or ejected. Hey--I'm getting ready to head out and won't be back till evening. I'll check back in this evening. Thank you again for your help.

Can OSX 10.4.3 Be Installed From A Disk Image ?

I am getting OSX 10.4.3 on a DVD.
If I decide to install it on my old G3 iMac instead of my eMac can I use a disk image.
The iMac only has a CD burner so I thought I could make the disk image on my eMac and transfer it to the iMac for installation.
Will this work OK?
Ian.

You can't boot from a disk image. Put the DVD in the eMac and boot it in Target Disk Mode (hold down T while booting). Connect the iMac with a FireWire cable (if it doesn't have FireWire it can't run Tiger) and boot it with the Option held down. Select the DVD and click the right arrow on the screen.

Boot from local disk image ?

Hi there,
I would like to now if it's possible to install snow leopard on my macbook air from a local disk image (.iso)
as anyone done it ?
Cheers,
Antoine

You cannot start up your computer from a disk image without cloning, burning, or restoring the image to an internal drive, external FireWire drive, or optical disks first, as disk images are not usable until the necessary drivers are loaded, and the drivers aren't loaded until Mac OS X has started up.
(16438)

Pulling video from a disk image?

is there anyway to pull video from a disk image or would i have to burn to DVD then rip the video back to my computer? if so, does anyone know of any good ripping software?

Hi Kyle,
no, a disk image is an image of a disk (what have I said right now???), meaning, as the content of a physical dvd, you're not able to change any content on that "virtual" disk... (maybe some mpg voodoo masters can, me not)
as you said: burn dvd, and.... (I love to write that):
get for 20$ the Apple mpeg2 plugin
and for free the tool Streamclip
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
best practise anyhow, is to go back to iM project! you're loosing quality with ripping dvds, they use a socalled lossy compressor.... so, in any case you have the project, a backup, some Quicktime-dv copy of it.....?

How can we delete uploaded mobile components from R/3

Hi All,
I need to know the function module or any transaction through which I can delete the uploaded mobile components from R/3.(which have been through Web console).
Can anybody tell me?
Please reply,
Deepak.

hello deepak,
there's no FM to delete all the registered MCDs in the MI
server at the moment. MCDs can only be deleted/removed if
there are no users/devices that use it. you can clear all
data of the user using the following FMs.
DELETE_ALL_DATA_OF_DEVICE
DELETE_ALL_DATA_OF_USER
DELETE_DATA_FOR_ALL_MI_DEVICES
DELETE_DATA_FOR_ALL_MI_USERS
if the existing dependencies are removed, then you can delete
the MCD using the FM
ME_JSP_SMOMO_MSD_DELETE
or directly clean up table BWAFDEPL.
regards
jo

How do you make a bootable install partition from a disk image of an install disk.

I have an iMac g4 running Leopard and would like to install OS X 10.3 on a different partition Leopard is on. However the super drive in the iMac will not read the disk I have, so I used my MacBook Pro to make a disk image of the install disk to use to install on the iMac. I do not know how to make the disk image into a bootable partition so I can install 10.3. The person I bought it from has already created a partition of the Leopard install disk and it is bootable but I do not know how he did this. Please help me. Thanks!

However the super drive in the iMac will not read the disk I have, so I used my MacBook Pro to make a disk image of the install disk to use to install on the iMac
Could be the cd is bad. Could be a bad cd reader.
I' not sure what you are trying to do.
To install,
-- you need to boot from a cd.
-- copy a working installation from another partition. try carbon-copy-cloner
-- could try target disk mode. There is a cd sharing mode.
"Installing OS X 10.4 'Tiger' on DVD-Challenged Macs Using FireWire Target Disk Mode" Should work for 10.3
http://lowendmac.com/misc/06/0710.html
Here is a picture of a firewire port:
http://upload.wikimedia.org/wikipedia/commons/thumb/b/b6/IEEE_1394_Firewire_PCI_ Expansion_Card_Digon3.jpg/800px-IEEE_1394_Firewire_PCI_Expansion_Card_Digon3.jpg
cd sharing across ethernet. Not sure if this works for booting.
http://support.apple.com/kb/HT5287

How can I restore up to the current day after restoring from a disk image??

I do two types of backups... Every night I connect my MB to TM and it backs up changes made throughout the day. On Saturdays I do the same. I bring up time machine and force to backup NOW. I then turn off time machine. I then perform an image backup of the full disk and keep that full weekly image offsite.
Well I upgraded to SL, and once again many of my drivers still don't work with SL particularly a Verizon Broadband card that I was provided drivers for that have a bug. So back to Leopard I go again.
I restored the full image backup using boot from DVD & Disk utility. This worked fast and quickly restored my MBP to exactly the point where I forced the backup to time-machine. I had done some work Sunday morning, and made changes to a bunch of files. I forced a TM backup later that night to ensure to catch these changes. After the failure of the SL load, I restored as I noted from an image which is much faster.
The question is... I am now at the same point of Sat morning. How can I restore to the point where I was Saturday night just before I did a test upgrade to SL if I touched a bunch of stuff. (Some work files, some personal files). So what I really need to restore is the files backed up after my full image from Saturday AM? Any way to do this without knowing the files I updated?
CLearly TM knows what files were changed and backed them up Saturday night before I performed the upgrade??
Thanks!
Mark

The easiest, most reliable way is to do a full system restore, as of the Saturday night Time Machine backup. See #14 in the Frequently Asked Questions *User Tip* at the top of this forum.
If for some reason you don't want to do that, you can get a list of the items that were actually backed-up, via +Time Tracker+ or +Backup Loupe.+ See #8 in the FAQ Tip.

How to install OS X from backup disk image?

I created a disk image of my OS X Leopard disk as a backup, but later discovered that I could not boot from the mounted disk image, nor could I use it to burn a new bootable OS X disk. What did I do wrong?

Welcome To  Discussions alansky1!
Did you use the procedure posted below to create the Disk Image of the Leopard 10.5.x install disc?
Insert the DVD that you wish to copy.
Open Disk Utility, from the Utilities folder.
From the list on the left side of the window select the original DVD that you wish to copy.
From the DU contextual File menu select New: Disk Image from Disk....
Name the disk image and choose Image Format: DVD/CD Master.
Save to the Desktop.
When the Disk Image is finished, you can eject the original DVD.
Back in Disk Utility, from the list on the left side of the window select the new Disk Image. This may be a .cdr or a .dmg.
From the Images contextual menu, select Burn.
Insert a new blank DVD and click Burn.
ali b

How do I import photos to iPhoto from a disk?

Hi, I have tried multiple times to import photos from a disk off of an old (5 yrs old) Apple computer into my new (3 month old) Mac. The only picture that will transfer is the first one. I have put in the disk, "selected" all photos and tried to "import" photos. It goes through saying that it is importing 300+ pictures but then the only one in the library is one photo. What can I be doing wrong? This seems so easy but it's driving me crazy! Thanks for your help.

You may have trouble importing multiple photos off the disk for some reason. Try inserting your disk and after it appears on your desk top, open it and try clicking on a singel photo and dragging it onto your desk top. Then click on it and after opening iPhoto, click on the desk top photo and drag into iPhoto when you have "Photo" opened in iPhoto.
If that works and you cannot make the same proceedure work when you select multiple photos, you have a long road ahead just moving one photo at a time.
Good luck...virg

How do I backup my MacBook Pro when the disk image is grayed out?

I have a MacBook Pro (15 inc. four years old) running OSX 10.6.8 and last night I got the color pinwheel of death. I could not force quit anything and had to manually power down.
When I powered back up I got the folder with the question mark. I ran Disk Utility and tried to Repair Disk, but I got:
Disk Utility stopped repairing "diskOs2"
...Back up as many of your files as possible
Details: Invalid B-tree node size
The volume could not be verified completely
Volume repair complete
Error: Disk Utility can't repair this disk, Back up... at the disk, and restore your backed-up files
I hooked up an external hard drive and tried to make a copy of the disk image, but it is grayed out. I also tried to partition the main Hitachi drive and make a "New Image" but I got: "Unable to create backup (input/output error)
So I now have a Genius Bar appointment for tomorrow, but I can't even back up my computer before going. I can have them tell me what to do, but then I'll have to go home and do it, and then make a second appointment.
Any suggestions? Oh, and I backed up this computer about six weeks ago on Time Machine, but I'd love to make a copy of all new files I've created since then.
Thanks!

You have two options. Purchase Disk Warrior or erase the drive. The former would require your ability to install a download of DW on a bootable disk so you could repair your hard drive. And, DW costs $99.00. The latter requires a Snow Leopard installer DVD from which you can boot, erase the hard drive, then reinstall Snow Leopard. Then download and install Mac OS X 10.6.8 Update Combo v1.1. You can then restore from your Time Machine backup. There is no way now for you to backup files unless you can access the drive. Open Disk Utility, select the entry for your disk volume then click on the Mount icon in the toolbar. If your volume mounts on the Desktop then you may be able to copy files to an external drive or even run a Time Machine backup.

How do I re-upload my HD from a Disk Image

Similar Messages

Maybe you are looking for