How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

You would have to restore to your entire iCloud backup, if you have one.  (The backup includes app data.)  Restoring to an iCloud backup has to be done in the initial setup process.  If you have any data on your phone now that is not in the backup that you want to save you'll need to do that first.  Then go to Settings>General>Reset and tap Erase All Content and Settings.  You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup.  Be sure you are connected to wifi and your charger as this will take some time to finish.

Similar Messages

  • How do I get my data from the icloud?

    I backed up my data to icloud then i got an entirely new iphone becaus eth eold one was faulty, so how do I get my old data that I put on the cloud onto my new phone? thanks fore any responses

    Open the following link http://support.apple.com/kb/HT4137, scroll down where it says "To restore your device using a previous backup", click on iCloud.

  • How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

    I have a tableView displaying a list of contacts from a Cloud Database.  After selecting a contact, I push to a programmatically created MKMapView.  Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
    Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6. 
    Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API.  How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
    I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused.  It must be possible to retrieve routes, since the Map App can display turn-by-turn directions.  How can I retrieve turn-by-turn data that I may display as a route within my own application?

    Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change. 
    I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
    for her (using Linux) and...
    got a new error code. Darn I was so sure I had found a clever solution this time lol.
    Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
    first so I could put them back if needed) to her new PC and the PC would not boot. 
    It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll. 
    ntdll.dll however seems necessary for Win7 to boot.
    So what I am wondering now is:
    Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
    the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
    dll's  path to the files it needs? 
    Willing to try any other options or settings you may have come up with as well.
    Thanks again for your reply and my apologies for not answering sooner.

  • How do I recover deleted notes from the cloud?

    How do I recover deleted notes from the cloud?

    Please note that these instructions (suggestions) have not yet been confirmed to work. I have however provided similar instructions for recovering contacts, calendars etc, which have.
    The difficulty in restoring iCloud data from a back up is that the back up is older than the current version on iCloud and anything that is restored gets removed again when an iCloud sync occurs.
    Recovering your notes is quite time consuming, you may wish not to save all your notes to save some time, if they are not of importance.
    Ensure the device is connected to your local network.
    Start the restore from iCloud back up.
    Allow the devices settings to restore (watch for the confirmation of completion).
    As the apps begin to restore pull the connection to your router WAN port (the one that goes to the telephone point).
    Wait for the time out confirmation.
    Open the 'Notes' app, and open your first note (assuming your deleted notes have now been restored).
    Select the share option at the foot of the screen (rectangle with arrow) and choose mail.
    Send the email to yourself (If they won't send, save them to draft)
    Repeat steps 7 & 8, until you have copied all the notes you wish to save to email.
    Reconnect the router to the internet and let the restore process complete.
    Navigate to settings > iCloud and make sure 'Notes' syncing is enabled.
    Open the 'Notes' app, check that iCloud notes have reverted to how they were before starting the restore.
    Open the 'Mail' app and open the first email you sent yourself and copy the text you want in the note.
    Open the 'Notes' app and create a new note in the iCloud, paste the text you copied.
    Go to iCloud.com on a computer and check that the note has synced to iCloud.
    Repeat steps 12, 13 & 14 until you have recovered all your notes.
    May I suggest that you carry out a back up to iTunes before you try anything, that way should things become even worse, you can at least restore back to where you are now.

  • How can i recover my data from an old hard drive after replacing it?

    How can I recover my data from an old hard drive after replacing it?

    Internal or external hard drive? Was the drive still working before you replaced it?

  • How can I recover deleted data from my time capsule?

    How can I recover deleted data from my airport disk?

    locate the files in time machine and click on restore. it will then restore them back to your hard drive,

  • HT1296 I bought my wife a new Ipad 3. How do I transfer her data from the old Ipad 1 to the new one?

    I bought my wife a new Ipad 3. How do I transfer her data from the old Ipad 1 to the new one?

    Sync the old one, and get a full back up stored.  Make sure you transfer your purchases to I tunes, and make sure you upload any photos taken on the pad, or imported thru the cck.
    Then plug the new pad in, and set it up from the backup of the old one.  In theory, all the stuff that was in the back up will migrate to the new pad.  If apps, music or books get lost, you can redownload them for free, using the same appLe id.  
    If you are selling or gifting the old one,   When you are done and happy with the new set up,  go to setting, general, reset, reset all content and data.  This will place the pad in factory new condition.   Lastly, if it is a 3 g pad, especially if it a Verizon pad, make sure to cancel the plan

  • I lost my iPhone 5 how can recover my photos from the iCloud

    I lost my iPhone 5 how can recover my photos from the iCloud?

    The only way photos are stored in icloud is in a backup from an ios device.  This assumes that icloud backup was turned on and that camera roll was turned on.  Note that photo stream is a slightly different service that is used to sync photos from one device to another, it's not really a storage service.
    To retrieve photos that are in a backup, you need to reset a device (wipe all data from it) and perform a restore.  Note that many users have had problems getting their photos back from a backup - for one reason or another.  Remember, the suggested way of storing photos is to sync them to a computer or service like Dropbox.
    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your device.  Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.

  • How to export some data from the tables of an owner with integrity?

    Hi to all,
    How to export some data from the tables of an owner with integrity?
    I want to bring some data from all tables in a single owner of the production database for development environment.
    My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
    These three fields are present in the main system table (the table of contracts). Then I thought about ...
    - create a temporary table from the query results table to contract;
    - and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
    I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
    select r.constraint_name "FK name",
    r.table_name "FK table",
    r.column_name "FK column",
    up.constraint_name "Referencing name",
    up.table_name "Referencing table",
    up.column_name "Referencing column"
    from all_cons_columns up
    join all_cons_columns r
    using (owner, position), (select r.owner,
    r.constraint_name fk,
    r.table_name table_fk,
    r.r_constraint_name r,
    up.table_name table_r
    from all_constraints up, all_constraints r
    where r.r_owner = up.owner
    and r.r_constraint_name = up.constraint_name
    and up.constraint_type in ('P', 'U')
    and r.constraint_type = 'R'
    and r.owner = 'OWNERNAME') aux
    where r.constraint_name = aux.fk
    and r.table_name = aux.table_fk
    and up.constraint_name = aux.r
    and up.table_name = aux.table_r;
    -- + Dynamic SQL
    If anyone has any suggestions and / or reuse code to me thank you very much!
    After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
    Thinking...
    Let's Share!
    My thanks in advance,
    Philips

    Thanks, Peter.
    Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
    With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
    1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
    2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
    Once again, thank you,
    Philips
    Reading Oracle Docs...

  • How to download data from the icloud?

    How to download data from the icloud?

    Settings>General>Reset>reset all content and settings. When iPhone restarts you will guide to restore from iCloud backup

  • How can delete my iphone5 data from the date its restored?

    how can delete my iphone5 data from the date its restored?

    it's unclear what you mean
    if you wish to remove your iphone5 data you connect it to iTunes on the computer and click the restore button and choose restore to factory defect

  • HT201272 How can we delete apps, etc from the Previously Purchased list so that they don't show there anymore?

    How can we delete apps, etc from the Previously Purchased list so that they don't show there anymore?

    You can't currently permanently delete purchases, all you can do is hide them so that they are less visible : hiding and unhiding purchases

  • Goto: How to export some data from the tables of an owner with integrity?

    Hi to all,
    Help please: How to export some data from the tables of an owner with integrity?
    My thanks in advance,
    Philips

    Thanks, Peter.
    Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
    With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
    1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
    2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
    Once again, thank you,
    Philips
    Reading Oracle Docs...

  • How can I restore my datas from the trash ( itunes music)?Thanks

    How ca I restore my datas from the trash( i-tunes) I still can read the lists, but they are not backed. Thks

    Try DataRescue from ProSoft.

  • How do you remove apps/programmes from the dock on my Mac?

    How do you remove apps/programmes from the dock on my Mac?
    Everytime I download something like pages, key note and twitter it appears on the dock at the bottom of the screen, How do I remove things from this dock?
    Thanks

    Welcome to Apple Support Communities
    To remove an application from the Dock, simply drag it off of the Dock, or right-click the app in the Dock and choose Options > Remove from Dock. Note that opened apps will always show in the Dock

Maybe you are looking for