How do I reduce the number of rings on the iPhone from 5 to 2?

How do I reduce the number of rings on the iPhone from 5 to 2 rings?
With thanks in advance -

Contact your carrier, as the number of rings before voicemail is controlled by them. Some carriers have a way to adjust this using GSM codes. You can look on your carrier's site for instructions.

Similar Messages

  • How do you unplug the iPhone from the Mac USB port safely?

    How do you unplug the iphone from the Mac USB port safely?

    Click on the little up arrow next to the name of your iPhone to eject the iPhone first.  Then just pull out the USB plug, grasping it by the plastic end of the plug, not the cable.

  • How do you reduce the glare from these new imacs?

    What can be done about the highly reflective glare from these new LED cinema displays?

    The new iMac's have screens that have the glass bonded (glued?) to the LED screen now that supposedly reduces the amount of glare by 60-75%.
    If glare is still a problem for you, there are a variety of different glare reduction sheets that can be applied directly to the glass.
    You need to do your own search for these as I can't vouch for the effectiveness and ease in which these products can be applied and which ones are recommend or are best and which ones to avoid.

  • I don't want all the contacts on my iBook to transfer into my iPhone. How do I keep the iPhone from importing all contacts?

    Help! I want to synch some things from my iBook to my iPhone, but most of my iBook Address listings I don't want on my phone. How do I keep the synch function from pouring addresses back in that I have just spent 90 min deleting??

    Create a group in Address Book only containing the contacts you want on the phone, then choose that group in iTunes for syncing to the iPhone.

  • How do I reduce the time from the detection of a input threshold to changing the output?

    Hi,
    I am using LabWindows 8.1 and a PXI-4461 with Vista (home) on a 2.81 GHz Dual Core Processor.  I wrote code to do the following:
    (1) output a ramp, input a signal concurrently (precise sychronization of these two is not important at this point)
    (2) if the input signal rises above 0.5 V, hold the output constant for 2 seconds, while continuing the input
    (3) finish the ramp
    More info: I do a continuous sampling, with 4 samples per Write, to do the output.  The input is read and analyzed with RegisterEveryNSamples (where N = 4).  The communication between the tasks is through a global variable "trap," which is set to 1 when threshold is reached.  I achieve holding the output constant by stopping the task (maintain existing value = true), and then restarting after the pause.  At 40kHz and 4 samples per Write, the limit imposed by the discrete data blocks would be  0.1 msec, but in fact I am getting delays of about 2.5 msec.  My write buffer is 120x4 samples, just so that there is space for me to write.  I do need to save the input data after the
    acquisition, preferably the whole sweep, but most importantly the data
    while the output is held constant.  
    So my questions are:
    (a) Does it really take 2 ms to stop a task? When I put in "Timer()"  functions as below, I get a difference of 0.002, which is of course limited to the resolution of the Timer() function. Returning from a function (the EveryN callback) should not take that long, right?
    (b) Can you suggest any better ways of doing this?
    /*****begin excerpt *****/
    DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(inputTaskHandle,DAQmx_Val_Acquired_Into_Buffer,4 ,0,EveryNCallback,NULL));
    DAQmxErrChk (DAQmxWriteAnalogF64(outputTaskHandle,480,0,10.0,DAQmx_Val_GroupByChannel,outData,&written, NULL));
    DAQmxErrChk (DAQmxStartTask(inputTaskHandle));
    DAQmxErrChk (DAQmxStartTask(outputTaskHandle));
        for (count =120;count<10000; count++)
            if (trap==0) {
                DAQmxErrChk (DAQmxWriteAnalogF64(gTaskHandle,4,0,10.0,DAQmx_Val_GroupByChannel,&outData[count*sampsToWrite],&written,NULL));
            } else {
                    DAQmxErrChk (DAQmxStopTask(outputTaskHandle));
                    time2 = Timer();
                    done = 1;
                    ProcessDrawEvents();
                    ProcessSystemEvents();
                    Delay (2.0);
                    trap = 0;
                    count++;
                    DAQmxErrChk (DAQmxWriteAnalogF64(outputTaskHandle,480,0,10.0,DAQmx_Val_GroupByChannel,&outData[count*4],&written,NULL));
                    count = count+119;
                    DAQmxErrChk (DAQmxStartTask(outputTaskHandle));
    /*****end excerpt *****/
    int32 CVICALLBACK EveryNCallback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples,void *callbackData)
        DAQmxErrChk (DAQmxReadAnalogF64(taskHandle,nSamples,10.0,DAQmx_Val_GroupByScanNumber,&readData[inCount*nSamples],nSamples,&numRead,NULL));
        if (trap == 0 && done == 0) {
            for (i=0; i<nSamples; i++) {
                if (readData[inCount*nSamples+i] > 0.5) {
                    trap = 1;
                    time1 = Timer();
                    break;
        } else done = 1;
        inCount++;
    Error:
        return 0;
    I would appreciate any help or advice! Thanks.  (Sorry about oddities in the code.)

    There are a number of applictations like Carbonite, Aperture, Entourage, VM Fusion, Parellels, etc that treat any change to the application as a complete change to application's database.
    So, if you make one small email change in Entourage for example, the entire database is backed up on the next pass. As you might imagine, this can fill up a Time Capsule very quickly.
    Suggest that you download a utility like BackupLoupe to find out exactly what is being backed up on each pass. Then you can exclude that item from backups if you wish.
    http://soma-zone.com/BackupLoupe/

  • How do you move the iphone from one computer to another.

    I am having a lot of trouble with a computer so I started using a different one. I have never had an iphone on this computer. When I hook up the phone and try to put anything on it, like a ringtone, it says that the phone is using another iTunes and it wants to erase all the content of the phone. I searched the internet and it says to just move it and all will be good. This I have found is not true!!

    You need to transfer your iTunes library from your old computer to the new or different computer per the instructions included with this link. Transferring your iTunes library from your old computer to the new or different computer you will be be using now to sync your iPhone with per the instructions included with this link (along with authorizing the new or different computer with your iTunes account with iTunes) will prevent any iTunes content on your iPhone that was transferred from your old computer from being erased from your iPhone with the first sync with iTunes on the new or different computer.
    http://support.apple.com/kb/HT1751

  • My husband registered an iphone in his name and have given it to me. I have an ipad registered in my name.  How can I change the iphone to my name and sync both devices.

    My husband registered an iphone in his name and have given it to me. I have an Ipad registered in my name.  How can I change the Iphone from his apple id to my name and sync both devices.

    You can create up to 3 alias addresses but you have to do this on icloud.com from your computer browser.  This article explains how: http://support.apple.com/kb/PH2622.  Also, incoming email to an alias address will go to your current iCloud inbox so it really isn't a separate account; just a different email address for the same account. 
    Each iCloud account only has a single iCloud email account.  If you really want to set up another, you would need to add a secondary iCloud account by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud, then entering a different Apple ID to create the account.  You can then turn on Mail to create the new account.  Mail in secondary accounts, however, is fetch email, not push (which is only supported in the primary account).

  • How do I reduce the number of emails showing on my iPhone?

    How do I reduce the number of emails on my iPhone 5, without deleting the account? It's a POP account.

    You read unread messages to reduce the notifcation number.
    You delete messages to reduce the number showing as available.

  • TS1702 how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

    how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

    You don't need iTunes for that. Simply connect the iPhone to the PC where it will be recognized as a camera. You can then select the photos you wish to transfer, transfer them, and delete them.

  • How do I reduce the number of pixels in my photos?

    How do I reduce the number of pixels in my photos?

    Export them at a smaller size:
    File -> Export - not the options at 'Size'
    Regards
    TD

  • HT4489 How do I reduce the number of calendar items on iCloud (having exceeded my 25000 entry limit and synch has now stopped), without loosing recurring items or future appointments. I.E. can I remove items by calendar year, say 2010 and 2011?

    I have been advised by apple that I have exceeded the 25000 entry limit on my iCloud calendar. Now, every time I try to make an entry in my iCal (iCloud) calendar, I get a warning with error warning "507". In essence I cannot add entries to my iCloud calendar on iCal, and synch with my iPad and iPhone has stopped. How do I reduce the number of calendar items on my iCloud calendar without loosing recurring items or future appointments. I.E. can I remove items by calendar year, say 2010 and 2011?

    I have been advised by apple that I have exceeded the 25000 entry limit on my iCloud calendar. Now, every time I try to make an entry in my iCal (iCloud) calendar, I get a warning with error warning "507". In essence I cannot add entries to my iCloud calendar on iCal, and synch with my iPad and iPhone has stopped. How do I reduce the number of calendar items on my iCloud calendar without loosing recurring items or future appointments. I.E. can I remove items by calendar year, say 2010 and 2011?

  • How can i reduce the number of calls archived in recents

    How can i reduce the number of calls archived in recents

    You can't change that.  It's a function of the OS and cannot be altered.

  • How do I reduce the number of emails to show on my iPhone with the new update?

    How do I reduce the number of email messages that populate on my iPhone with the new operating system?

    You read unread messages to reduce the notifcation number.
    You delete messages to reduce the number showing as available.

  • How do I reduce the number of pages in an iPhoto book from 100 to 50

    How do I reduce the number of pages in an iPhoto book from 100 to 50.  I have selected 153 photos to be put in the book and iPhoto automatically designated the book to be 100 pages in length.

    If the auto place put photos on all 100 pages you'll need to reset the layout on the first 50 pages so all photos will fit in just those 50 pages.  Then add the photos to the first 50 pages and delete the last 50 according to the link Larry provided.
    OT

  • How do I configure the iphone to go to voicemail in a lesser number of rings?

    How do you configure the iphone 6 to go to voicemail in a lesser number of rings?

    Willness wrote:
    How do you configure the iphone 6 to go to voicemail in a lesser number of rings?
    Sorry there is no settings to configure that, it is set up by your cell phone provider, you can contact them and see if they can or can't change it for you.

Maybe you are looking for