How do I remove the Facebook Exporter for iPhoto?

Hello,
I have recently installed v1.0.8 of Facebook Exporter for iPhoto, and it hangs on the first picture I attempt to upload. It is unusable. I had found the previous version 1.0.6 which worked great and downloaded that, and subsequently attempted to install it. However, the installer errors out stating that there is already a previous version installed. The v1.0.6 and v1.0.8 installers, do not have an uninstall feature either. Direct support for this package is impossible from the developer.
I'm asking if anyone could lay out exactly what I need to remove in order that I can proceed with downgrading to the v1.0.6 once again. I have asked in other forums(not here) and have had only "upgrade all your software to the latest versions and everything should work" answers, which were and are completely useless. If an upgrade is required of something, please be specific as to why.
Note that, I have already performed this function as outlined here, http://www.facebook.com/help/?faq=222897111055523, which simply describes deleting a folder in their install directory. This has not worked, meaning the removal has worked, however reinstalling the previous version envokes the error about a later version.
Versions involved;
MacBook Pro, 2.53ghz, core 2 duo
MacOS v10.6.8
iPhoto '09, v8.1..2 (424)
Thanks,
Mark

To unpin a Tile
Tap and hold the Tile you want to remove from Start.
Tap Unpin .

Similar Messages

Is there a secret place in my mac the Facebook Exporter for iPhoto is hiding?

I recently installed Facebook Exporter for iPhoto 1.0.7 on my Mac OS X 10.6.8, with iPhoto version 7.1.5. It read the install was complete.
I tried using the program and it didn't seem to synch with Facebook (says there's a connection error). After reading about numerous problems people have encountered with this plug-in, i decided to remove it.
I've tried following the instructions to uninstall the plug-in, but I can't seem to find the file where it's supposed to be stored, in the Package Contents under iPhoto. As far as I can tell, the program did install because a Facebook option is still showing up in my iPhoto exports menu.
My computer seems to be running slow and stalling since installing the plug-in and I just want to get rid of it once and for all. Please help. Thanks

Download and run Find Any File to search for files with "Facebook" in the file name.
FAF can search areas that Spotlight can't like invisible folders, system folders and packages. This will help you see where the plugin is located on your hard drive.
But for a fix reggie has the correct suggestion, contact the developers.

How can I remove the Facebook Exporter Plugin (32-bit) designed for AP2?

Now that I have A3 which has native ability to export to Facebook, I wanted to delete this plugin I have used and downloaded from the plugin page.
This plugin does not create/provide a plugin that is supposed to reside in the Library/Application Support/Aperture/Plug-ins instead there is a package file and an installer; the developer who created this (and who according to post on his site) no longer is actively developing it.
So it isn't an easy case of just removing the plugin from that directory.
For those who use this plugin does anyone know how to remove it?

Yes, it's stil in the export menu. I also had the flickr exporter that was developed by another developer and initially that was in the export menu as well in Aperture 3. I went to the plugins folder and removed the plugin then when I restarted Aperture the flickr plugin was removed (as expected).
But this Facebook plugin never created a "plugin" per se (a spotlight search indicated some files with the extension ".h" in the Library/Frameworks folder but I'm not sure what that means...).
Consequently there never was a plugin in the Plugin folder to delete, hence my dilemma.

Facebook exporter for iPhoto 11 problem!

I previously had installed the Facebook exporter for iPhoto and it worked fine. It always showed up as a tab in File Export. Now with Iphoto 11 the tab for facebook has disappeared. I went to the download page for it again to reinstall it and when I go through the installation process and it asks where to install I have the exclamation mark on my Mac hard drive with the following error. "Facebook exporter for iPhoto can't be installed on this disk. A newer version of this software already exists on this disk.
I went to plugins and removed it yet I still get this error on reinstallation. Why won't the exporter work anymore or install?
I like this much better than the built in one on iPhoto as it lets me caption each photo before I upload.

I found the problem
It seems the version of facebook exporter found on the applesite is an older one.
I downloaded a newer version on versiontracker and that fixed it.
tha one I am using now is facebook exporter iphoto v 1.0.5
cheers

How do I remove the facebook icon from my contacts tile?

How do I remove the facebook icon from my contacts tile? Thank you.

To unpin a Tile
Tap and hold the Tile you want to remove from Start.
Tap Unpin .

What happened to facebook exporter for iphoto?

I keep getting an error when trying to share photos from iphoto to facebook. I have tried all the common things, but now I see that there is no longer facebook exporter for iphoto. I have had this Macbook Air since May, and was able to share photos via iphoto exporter to facebook, and now all of a sudden it is not working. Any help would be greatly appreciated.

I had Iphoto exporter plugin installed previously and it would show up on file-export as an option. Then mysteriously it was gone as an option. I tried to download the plugin again from Cnet and when I try to install it I get and error saying "It can't be opened because of an inidentified developer my security preferences only allow installation of only apps from your Mac app store and identified developers"
How do I turn off that security so I can reinstall it again. As for why my original install disappeared I am mystified about that. Why was it there one month and then poof gone the next month?
I like that 3rd party plugin as it lets me caption all the photo's and rearrange the order and write a discription all in one application. It works better than the share button way of doing it to facebook.
Is it not compatible with Iphoto 9.4.1?

How can i change the facebook account in iphoto?

How can i change the facebook account in iphoto?

iPhoto Menu -> preferences -> Accounts
Regards
TD

Photosmart 8230. How do you Remove the print heads for cleaning?

Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
This question was solved.
View Solution.

I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET. You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them. The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
----- Original Message -----

How to hide/remove the 'Delete' button for a particular role

We have a role that can only Create and Edit the Accounts, Contacts, Opportunities, & Leads. So I modified the Default and Owner Access Profiles for that role and changed the Access Level to 'Read/Edit' for each of the above mentioned Record Types.
When the user is logged with this role they can see the 'Delete' button on all the Record Types. When they click on the 'Delete' button they get the 'Access Denied' message. Thats fine, but how do you hide/remove the 'Delete' button for this role so they don't try to click it.

At this time it is not possible to hide/remove the "Delete" button. This functionality is on the roadmap.

Problems with the Facebook Exporter in iPhoto 08

Has anybody successfully used the Facebook Exporter plugin for iPhoto? Every time I try to upload multiple photos, it has a bar saying "Exporting 1/{whatever number}", but then comes up with the following error:
"Couldn't upload photo "{photo number}" because an unknown error occurred."
...and it gives me the option of:
"Back to Facebook Exporter" or "Review Facebook Album"
...if I click on the latter, it goes to Facebook and shows that the first Photo has indeed uploaded successfully. So I've been going through doing it one at a time but that is pretty tedius!
Any ideas what I'm doing wrong? It doesn't matter what the photo's are, it does it every time.
Cheers.
AD.

Must have been a dodgy version of the exporter as having downloaded an update it works fine...

How do I delete the iAPPS.plist for IPhoto?

Hello!
I need to delete the iApps.plist for IPhoto and want to make sure that I am doing it correctly before I do so.
I think I found it here:
HD/library/iAPPS/iPhoto/AlbumData.xml
Is this the correct file to delete? I am having trouble with iMovie and found a suggestion on this list that deleting it might help.
Thanks!

Restore your backup form before you installed the unspecified update - there is no other way to delete an update
alternatively you could provide details about your problem and maybe someone here could help
LN

How do I remove the Facebook selfie and my name from iPad 3 multitask screen?

When the home button is double clicked and all open apps are visible by sliding left or right (multitasking screen), iOS8 has inserted my Facebook photo at the top of the screen with my name under it. If I click/touch the image, a small text baloon pops up. That in turn allows immediate responding to a text message, or sending of a text message. How do I remove my image and name? I deleted the image from my FCebook account but the Oscar has already stored a copy. right now I have to find a way to keep the keyboard from second guessing me and replacing what I want typed with what it wants typed (See 'Oscar' above, should have been OS).

I Think you can turn off the Recents you are seeing in the App Switcher by using the Settings app.
Settings > Mail, Contacts, Calendar > Scroll down to the Contacts section > Show in App Switcher > Turn that Off

How can I remove the back cover for my ipod?

I need to remove the cover because my ipod seems to be suffering from a hardrive problem. It used to just cycle through all the songs in a playlist or randomly play 5 seconds and skip to the next song, but now it just makes a whirring noise when I try to turn it on and cannot get past the apple logo.
Sometimes I get the little unhappy ipod logo and the support website but thats it.
Iv tried going into diagnostic mode and attempting to run a few tests. It failed a USB test in this mode so i think that may be one of the problems with it.
Does anyone know of a fool proof way of removing the case so I can dis/reconnect the harddrive?
Windows XP

Before you remove the back cover of your iPod - which will loss the warranty
Read the following
he Sad iPods icon or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Still can't see your iPod?
Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
3. Try to wait 30 minutes while iPod is charging.
4. Try another known-good FireWire or USB through Dock Connector cable.
5. Try another known-good FireWire or USB port on your computer .
6. Try to disconnect all devices from your computer's FireWire and USB ports.
7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
“Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
10.Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Pictures and instructions of how to open the iPod case for battery replacement
http://www.kokopellimusic.us/KM_instructions.htm

How do I change the default location for iPhoto media?

On my MacBook Pro, I have a 250 GB solid state drive. More than 140 GB of that space is taken up by images and video in my iPhoto folder. I want to purchase an external hard drive to store my iPhoto media so I can free up space on my Mac's hard drive. I can drag and copy the images/video to the new external hard drive, but in the future how can I change the default location to the new external device? I looked at iPhoto preferences, but see no setting that would re-direct media from my camera. Please help.

Copy the library to the external hard drive. Then launch iPhoto with the option key held down and choose the library on the external hard drive.
Run the external library to make sure it has all of your photos and works as expected. It will not be your default library.
Once you're sure the external library is good you can delete the library on the SSD.
OT

How do i remove the top cover for the K410?

I spilled water on the top of my computer, and it messed up one of the USB ports on the top of it... now the computer constantly pops up connect/disconnect messages. I want to take the top bezel (or cover, or whatever it's called) off so that i can disconnect (or cut) the cable to that USB port, but i cant figure out how to remove it. Does anyone know how to take it off? It's the very top of the machine, which has the power button and 4 or 5 inputs.
Both USB cables go into one plug at the motherboard, otherwise i would just disconnect it there. I suppose i could cut one of them at the motherboard, but i want to make sure im cutting the right one.
Thanks for any help.

Just guessing, if water is should dry in a day or two and not be a problem. Also, guessing, probably have to pull the side cover to get access to release the top.

How do I remove the Facebook Exporter for iPhoto?

Similar Messages

Maybe you are looking for