How do I remove the "folders" attatched to the bookmark names in the bookmarks toolbar?

Hello -
Though I understand that Firefox is not Safari, a browser I have been using since its' introduction and now switching to Firefox with the ongoing issues I have with Safari, there is one thing that is bothersome for me with Firefox and the bookmarks bar.
On this bar, I am unable to find a way to remove the folders that are attached to the left of each bookmark on this bar - there is no option to delete (or have) this as an option. I have imported all of my bookmarks and bookmark folders from Safari and they all fit on the bar if these additional folders are not present. This goes along as well with the bookmarks bar addition to the Firefox browser that is at the right end of the bar, which I would prefer not be there as well - this information can be found in the "bookmarks" drop down at the top of the screen on the Mac.
Is there a way (I hope) to remove these folders that sit to the left of the bookmarks, in addition to removing the bookmarks information tab that is located to the end right of the bar (w/o me going into the code for the program and attempting to figure it out on my own)?

Hi mactec,
Install the "'''Stylish'''" extension and then the style listed below
# [https://addons.mozilla.org/firefox/addon/stylish/ Stylish :: Add-ons for Firefox]
# [http://userstyles.org/styles/9091 '''Bookmarks Toolbar Blue/Folders, Red/Bookmarks''' - Themes and Skins for browser - userstyles.org]
: Bookmark folders shown without icons in BLUE, and any bookmark not in a folder would be considered special and would be shown without icons in RED.
For a list of some of the styles that I use see
* [http://kb.mozillazine.org/User:Dmcritchie User:Dmcritchie - MozillaZine Knowledge Base]

Similar Messages

  • I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    See below if the search engine setting was changed without your knowledge and you can't change it back.
    You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
    Step 1
    In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
    There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
    This step does not completely inactivate Genieo.
    Step 2
    Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 3
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

  • How can one remove a raised texture pattern from a scan of the original photo?

    How can one remove a raised texture pattern from a scan of the original photo?
    Have several wedding photos scanned into PS Elements that were printed by the pro, photography studio on a raised pattern paper. Would anyone know how to remove the honey comb type pattern so that the picture canbe printed flat on glossy color photo paper?
    Any help would be greatfully appriciated.
    Thanks,

    The best way to remove a pattern is to use a Fast Fourier Transform.  There's a free plugin (as well as examples and instructions) here:
    http://dl.dropboxusercontent.com/u/6795661/4N6site/improc/fftplugin/examples.htm
    Using the plugin requires editing the individual colour channels, which PSE does not natively allow.  You'll need the reasonably-priced Elements+ addin:
    http://elementsplus.net/
    Here's a crop at 100% of the result I got:
    The pattern is much reduced.  With some experimenting, you can probably do a little better.
    Ken

  • How do i remove iOS 7 from iphone and go back to the previous iOS?

    How do i remove ios 7 from my 4s and get back the previous ios?

    You cannot do so.

  • How do I remove a white film on a photo after scanning the photo?

    How can I remove a white film on my photos after scanning the photos?

    Can you post the photo so we can see what you are talking about.
    Not sure of this is the same as what you have, but when I scan DVD Covers for my DVD Cataloguing program I'm too lazy to take them out of their slipcases. The scans always look a bit milky, because of the plastic, but I've found that Enhance> Auto Smart Tone is ideal for fixing them. And because of the Learning feature of Smart Tone it usually puts them right the moment I select the option.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

  • In URM, the RMA_NOTIFY_AUTHORS service is using my name in the "from"

    IN URM, when the RMA_NOTIFY_AUTHOR service is activated from a disposition, all emails are listed "from" me.
    I have no idea why that is or how to correct it. I opened a request with Oracle support with no success as of yet. The best they could offer was to tell me to check what email address I had for the sysadmin in my config.cfg file. that email address is totally different than mine and correlates to the system administrator. All other emails that come from the URM instance reflect the sysadmin as the "from". but for some reason any emails sent via the RMA_NOTIFY_AUTHOR service has me as the from, no matter what user causes the disposition to activate.
    If anyone out there can tell me where URM decides what email address to use for all of its AUTHOR NOTIFICATION emails, I would appreciate it.
    Thanks

    This happens when you run the batch services yourself. If the batch services run by theirselves, at the scheduled time, the email address that is attached to the sysadmin is used in the from, otherwise, whoever runs the batch service manually has their name in the from for the notifications generated from the batch service.

  • What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.

    What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.

    The entries in blue are people you've recently exchanged iMessages with, the ones in green are people with whom you've recently exchanged SMS messages and the ones in grey are people with whom you have not recently exchanged any messages.

  • (1) I want to alphabetize faces. (2) Can't change spelling in Faces. After I correct it, it jumps back to the incorrect spelling. There are names in the list that aren't assigned. Can they be deleted??

    (1) I want to alphabetize faces. (2) Can't change spelling in Faces. After I correct it, it jumps back to the incorrect spelling. There are names in the list that aren't assigned. Can they be deleted??
    I type Sandi Patty.  It changes it to Sandi patty.  (Little "p")  There are some pics in there correctly capitalized and some that aren't.  So, I deleted all the faces with incorrect spelling hoping to clear the system of that name completely.  Didn't work.  As you type Sandi, all the choices, including the one with error in capitalization show up.  I type it CORRECTY -- Sandi Patty -- I click on another face and the Sandi Patty becomes Sandy patty.  (Little P)     There are other names in the list that were the result of bad spelling.  Can these NOT be deleted??

    Not at this time, I spent an hour on the phone with Apple support today on this topic and they could not locate the files necessary to delete names from the list.  Bummer

  • Desktop appearance problem:  For no apparent reason my Mac running OSX 10.4.11 imposed a mesh-like pattern over the folders on my desktop and also across the top of the screen and down the right-hand side where I have the dock.  How do I remove it?

    For no apparent reason my Mac (2 GHz PowerPC G5) running 10.4.11 has put a mesh-like pattern over the folders on my desktop and also a band of the same pattern across the top of the screen and down the right-hand side over the dock.  (See screen grabs below.)
    It doesn't affect any operations but makes folder names and drop-down menus difficult to read through the pattern.
    I'm not aware of changing any settings so suspect I must have clicked on something without noticing.  How do I get rid of the overlaid pattern, please?

    Information about my computer is as follows:
    Machine Name:          iMac G5
    Machine Model:          PowerMac8,2
    CPU Type:          PowerPC G5  (3.1)
    Number Of CPUs:          1
    CPU Speed:          2 GHz
    L2 Cache (per CPU):          512 KB
    Memory:          1 GB
    Bus Speed:          667 MHz
    Boot ROM Version:          5.2.5f1
    It looks like this at the back:

  • How can I remove version 3.5 from my computer... the add/remove programs will not work, I have 3.6 installed and 3.5 is taking up over 2 gigabytes of disk space according to the add/remove in the control panel and nothing I do will remove 3.5

    I have been trying to make room on my C drive and have been removing stuff I don't use. I have version 3.6 Firefox but my settings show I also have 3.5 which shows over 2,000 megabytes of disc space being used. I try to remove it but nothing happens, nor can I find it when searching "my computer" to try and kill it. Why would any program use up 2 gig of space?
    == This happened ==
    Every time Firefox opened
    == I was trying to find a way to clear up space on my C drive

    If you need to consider removing 30MB folders to create space then I imagine your hdd is seriously short of space. Normally I think it is often suggested a minimum of 20-25% free space be left on a Windows machine hdd. How much free space % wise have you at present.
    You probably have already thought of these, a lack of space could slow things down and may even contribute to crash problems.
    *Not using the Hibernate feature will release one largish chunk.
    *Not keeping video files on the HDD unnecessarily is also likely to save space.

  • How can I remove an icloud email address if i have forgotten the password?

    How can I remove an ICloud email address that's on my IPhone if I have forgotten the password?  I have tried to reset the password through Apple ID but I no longer have access to the email address and its not recognising my birthday

    If all you want is an additional email address you can create up to three 'email aliases'  - these are additional addresses (not accounts) which deliver into the same inbox as the main account.
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
    More information on aliases here:
    http://help.apple.com/icloud/#mm6b1a490a
    If you want to keep her email separate from yours she will need to create a new Apple ID, and use it to create a new iCloud account either on a separate computer or on a separate User Account on your Mac.

  • How do I remove migrated PPC apps from Intel iMac that has the same apps?

    Before I begin, please know that I've read a lot of previous posts but all the posts only had some of what I needed so I'm posting this as a new topic. OK, here I go:
    My PPC running 10.5 just froze-up (that has since been solved) but in the process of solving that issue, I migrated everything as a different user (User B) INCLUDING my applications, to my Intel iMac - my iMac that also had the same applications on it - except they were intel versions and they were under User A.
    So I essentially did an archive and clean install on my PPC.
    Then, using Migration Assistant, I transferred User B onto my PPC. Now both of my computers have duplicates of most of my applications. In trying to fix this issue, I found out I should NOT have transferred my applications. So now I'm very confused as to which apps I should remove off my PPC and which I should remove off my intel iMac.
    If I just delete User B from my intel iMac, that's easy enough but will that remove the dupes? I have a funny feeling it doesn't.
    And then, which do I remove from my PPC?
    AND THEN, are there other things I will need to remove from different places on my computer?
    Any help would be greatly appreciated. Thanks!
    And now, I've used migration assistant to move everything from user (B) back to my PPC. Now I have duplicate applications with "(from old mac)"

    Normally application go in the Applications folder at the top level of the hard drive, not in any user folders. If you have applications in user folders that are the same as those in the Applications folder, you can delete them from the user folders. If you actually migrated PPC applications into the Applications folder on an Intel Mac, it would have replaced the Intel versions. To fix that,you would have to reinstall OSX on the Intel Mac.
    The same thing would apply on the PPC Mac.

  • How can I remove my old apple id from iTunes and put the new one in?

    Morning all, how can I remove my old apple Id from my I tunes account and replace it with the new apple ID, ?
    Many thanks
    Kimber. Lee

    Sign out of iTunes and sign in with the new ID. On your computer, under on of the iTunes menus, on your iPad Settings > iTunes and App Stores and tap on the Apple ID.
    Note that all apps downloaded under the previous ID are locked to that ID, and you will have to sign back onto it for any updates.

  • How do I remove a photo from iPad camera roll taken by the camera?

    How do I remove a photo from iPad air camera roll taken by the camera?

    I took 2-3 hundred pics on my trip with my iPad mini and have downloaded them to iPhoto.  How can I get rid of them on my iPad now...do I have to do it one picture at a time?   When I first downloaded them iTunes asked if I wanted to delete them from my iPad and I foolishly said no.  Am I now forced to do it them one at a time or is there a setting I am missing that will do it?  They are using all of my memory!!

Maybe you are looking for

  • Multiprovider Issue

    Hi BW Guru's, I have done minor enhancement to the masterdata datasource.  I have added a BUSAB field in the source system then in BW system i have replicate the data source and created Info object, defined as a attribute in the primary Info object. 

  • Solaris on Intel Server

    Dear all, Will Open solaris 10 on Intel server given below.Customer wants to host SAP Enterprise portal on this server.Can you guide me to build a better solution??? Please follow the link below to know more about the server. http://www.intel.com/des

  • Release of system DW3 could not be determined

    Good Day; I seem to be a wee bit stuck. I am able to create a transports + tasks for a change request. I then release the task using SE01 to release the task. Using CRMD_ORDER I select the change request, select release transport from the drop down.

  • HT203200 Getting error-50 while trying to sync

    My daughter's iphone is recognized when we are both in the house sometimes when I plug in my iphone it shows hers! We have different apps and music etc. But every time I try to sync her phone (like now trying to update to IOs6)  I get almost to the e

  • Field problem with final video. Help please.

    Hey all, Thanks for reading. I working with Premiere 2, AE cs4 and Encore 2.0. I'm rendering out of AE with No Fields Progressive (it what look best on my Sony Tritron which I'm using for a monitor), same story when I export out of Premiere as mpeg2.