How do i remove the protectsmart cover to change a damaged hard drive in an HP Pavilion dv5-2132dx?

I have an HP Pavilion dv5-2132dx laptop. The hard drive has completely failed and needs to be replaced but I can't figure out how to access the hard drive. There are no screws on the panel and it says HP Protectsmart on the back. I need a video on how to do it.
This question was solved.
View Solution.

Hi,
The following manual will show you how (page #59):
   http://h10032.www1.hp.com/ctg/Manual/c02666786.pdf
More manuals for your machine are on the following link:
   http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=4317216
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How do i remove the battery cover on the iphone 5?

    How do i remove the battery cover on the iphone 5?

    Look on the right side of the phone, for a sim tray, you'll need a paperclip to push into the small hole for the sim tray to open.  Or look in settings - general - about

  • How can i use the airport time capsule as a external hard drive?

    how can i use the airport time capsule as a external hard drive?

    Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
    I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
    But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
    If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
    In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
    Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

  • How do I copy the entire contents of my laptops failing hard drive to copy back onto a new computer.

    How do I copy the entire contents of my laptops failing hard drive to copy back onto a new computer.

    If the drive has failed the only way to get any data off it is to send it to a Data Recovery company. Which is very expensive and no guaranty they will be able to retrieve any data.
    That is why Apple has included a system to backup your Mac on a regular basis, Time Machine. Also there are other Apps to do basically the same thing by Cloning your internal drive to an external drive. Carbon Copy Cloner and SuperDuper. Along with using Disk Utility to Image the internal drive to an external drive.
    Sorry to tell you but if the drive has really failed your Data is gone unless you pay a large sum of money to one of the Data recovery companies.

  • How do I remove the top cover from my Toshiba satellite L305-S5875 laptop?

    I already tried the instructions from irisvista.com but it doesnt help. i just need instructions on how to remove the top cover after removing the keyboard.
    Thank You so much

    Just guessing, if water is should dry in a day or two and not be a problem.  Also, guessing, probably have to pull the side cover to get access to release the top.

  • How can I remove the back cover for my ipod?

    I need to remove the cover because my ipod seems to be suffering from a hardrive problem. It used to just cycle through all the songs in a playlist or randomly play 5 seconds and skip to the next song, but now it just makes a whirring noise when I try to turn it on and cannot get past the apple logo.
    Sometimes I get the little unhappy ipod logo and the support website but thats it.
    Iv tried going into diagnostic mode and attempting to run a few tests. It failed a USB test in this mode so i think that may be one of the problems with it.
    Does anyone know of a fool proof way of removing the case so I can dis/reconnect the harddrive?
      Windows XP  

    Before you remove the back cover of your iPod - which will loss the warranty
    Read the following
    he Sad iPods icon or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
    1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
    9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
    “Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
    - I tried the 5in1 test and got and error on Firewire.
    - I did the HDD R/W and surprisingly it passed.
    - I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
    My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
    Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
    10.Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
    Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
    Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
    Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
    I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Pictures and instructions of how to open the iPod case for battery replacement
    http://www.kokopellimusic.us/KM_instructions.htm

  • How do I install the operating system on a store bought hard drive?

    I purchased a hard drive from best buy to replace the one that died on my hp G60-501.  When I try to run the system install disk, it runs through the entire thing (around 1.5 hours).  When it finally finishes, it says that it needs to be reinstalled.  I have done this several times but to no avail.  I was told that the drive needs to be tatooed for HP.  WHat does this mean?  How do I do it?  Is it something that I can do on my own?

    There should be no need to tattoo anything. What type of system install disk are you using? Is it the one you made when the computer was new using the DVD burner? I am suspecting a problem with the recovery disk. What brand of hard drive is it? We can get you a utility disk for the drive and I suggest wiping it clean and starting over. You should be able to order an HP recovery disk or just use a retail or OEM Windows disk.

  • How do i remove the top cover for the K410?

    I spilled water on the top of my computer, and it messed up one of the USB ports on the top of it...  now the computer constantly pops up connect/disconnect messages.  I want to take the top bezel (or cover, or whatever it's called) off so that i can disconnect (or cut) the cable to that USB port, but i cant figure out how to remove it.  Does anyone know how to take it off?  It's the very top of the machine, which has the power button and 4 or 5 inputs. 
    Both USB cables go into one plug at the motherboard, otherwise i would just disconnect it there.  I suppose i could cut one of them at the motherboard, but i want to make sure im cutting the right one.
    Thanks for any help.

    Just guessing, if water is should dry in a day or two and not be a problem.  Also, guessing, probably have to pull the side cover to get access to release the top.

  • How do I remove the battery cover?

    Trying to register my phone and don't know how to get the cover off without breaking it

    sheri0922 wrote:
    i just got it thru the mail and it says to activate I need my sim chip #
    What does this have to do with the battery?
    You should read the manual.
    Just remove the sim card:
    iPhone User Guide (For iOS 6 Software)

  • How Do You Remove the Switch Cover on an HP Pavilion dv7t-1000 ?

    I'm trying to replace the keyboard in this beast, but I can't get the Switch Cover (aka "Quick Play "Cover) off. The HP service manual and every video I've seen make it look easy, but this one is just plain STUCK. When I try to lift up from the center as it shows in the manual, it won't budge. I've tried prying the sides up with a guitar pick as shown on YouTube, but that didn't work either.
    Has anyone ever done this? Is there a trick to it? I've been successful with similar repairs before, but this looks impossible
    ...Thanks!

    I was very hesitant in replacing my HD in the G4 iBook, but it was finally running so slowly, that it was my last resort. Now, the iBook has never run faster, or cooler. I replaced the 40 GB Toshiba with an 80 GB Western Digital Serpico, running 5400 RPM. I was VERY careful, and checked things twice. There are a few tricky sections, and a few parts that can get destroyed, (wire connectors) but overall it was easier than I anticipated. Needle nose pliers and tweezers help!

  • How do you use the 2nd gen ipod touch as a hard drive?

    I restored it and renamed it because my sister gave it to me, and now I restored it to use it as my own, and it works fine and all, occasionally saying it can't sync some applications and movies because it can't find the file or something, and I've tried removing all my music (which is like, 5.5 GB total) and it still has those same errors. The other thing I have a problem with, as the subject implies, how do I use it as a hard drive? I've seen the tutorials on apple, but I don't see the "enable disk use" on itunes in the XXXXX's ipod summary tab.

    The iPod touch doesn't have the "enable disk use" option of other iPods.
    A program called AirSharing will let you mount the iPod touch as a wireless drive
    http://www.itunes.com/app/airsharing

  • How can I tell the app store to ignore my external hard drive?

    I have a macbook pro, that was running 10.8..  I wanted to upgrade to Yosemite, but was very afraid I would regret it, so I got an external hard drive, made a bootable clone, and then installed yosemite onto that, upgraded XCode, etc-- made sure everything would actually work..  After I saw everything was relatively good and painless, I then went to install Yosemite on my main computer..
    Whoops?  Yosemite installer is gone?  It self deletes?  That is really annoying since it's a 5.8gb download...  Anyway, I re-download it, format my MBP hard drive and install from scratch.
    I then boot from my MBP-- and go to the app store to install XCode, and---  it just has "OPEN" as an option, not install..  When I click OPEN, it's opening it off my external hard drive.  WHAT?
    So I unmount my external hard drive..  Click install..  remount my external hard drive, it goes along downloading the multi-gigabyte XCode file...  I continue copying the various needed files from my bootable clone to my MBP...  Two hours later, the download finishes...  Guess what?  No XCode in my Applications.
    Apparently when I remounted my external drive, it decided "I already have XCode!  no need for this!", and discarded the download?????
    ...  Anyway, needless to say, this is ridiculously annoying.  Is there a way to tell the app store to NOT look at anything except my internal HD?

    Check the date & version of the external Xcode. If that is current drag it to the Apps folder, eject the external & run Xcode. It should update if it has any available.
    I don't know what would have caused it to abort or remove the download. It's possible it installed into your user folder, check for the Applications folder in there.
    Does the store list it as installed with & without the external connected?

  • How do I access the music on photos on my external hard drive, on my MBA?

    I bought a 64Gb MBA slightly used, and knew the space wasn't going to be enough for my music and photos, so I bought an external hard drive, (the iomega helium), thinking that I could just load it with my pics and music, and access it from there, when I wanted to view the pics and music on my MBA when I wanted to. Well, I loaded the libraries onto the EHD, and upon opening both iTunes and iPhoto up, can't figure out how I access them off the EHD. Any help?
    Also, on the first version of the MBA trackpad, how do I right click? Thanks in advance!

    Well, I loaded the libraries onto the EHD, and upon opening both iTunes and iPhoto up, can't figure out how I access them off the EHD.
    Launch the applications with the Option key held down, and click on Choose Library if you've created a full library on that drive. If not, create one and import the content.
    Also, on the first version of the MBA trackpad, how do I right click?
    Click here and perform a secondary click, or control-click an item.
    (47982)

  • How do i move the contents of iphoto to an external hard drive

    My iphoto has 37GB of photos on it which I want to move to a Seagate external drive which has 500GB space, but when I try to move the folders through Finder they wont stick, any suggestions?

    Below is an example for how to move iMovie files to an external drive. This works for iPhoto too, just change the folders in the text below.
    1. Copy all iMovie folders (in the Movies folder) to the external drive.
    iMovie Events
    iMovie Projects
    iMovie Sharing
    2. Wait until finished
    3. Rename the iMovie folders on the internal drive to something like
    iMovie Events.orig
    iMovie Projects.orig
    iMovie Sharing.orig
    3.On the external drive, click on the created folder
    iMovie Events
    iMovie Projects
    iMovie Sharing
    press Alt+Command key (apple key) and then drag the folders back to the Movies folder on your internal drive. It will create alias (links) to the external folders.
    4. Start iMovie. It should now look for the iMovie folders in the Movies folder, which points to an external driv.
    5. If everything works well, the .orig folder may be deleted on the internal drive.
    This kind of trick works for allmost all folders you want to move to an externa place (drive, network drive)
    Hope this helps.
    /rob

  • How do I take the face plate off of a DVD/CD drive from my HP Pavilion dv4t-1300?

    HP Pavilion dv4t-1300, Windows 7 Pro 64-bit
     I bought a blu-ray drive to replace the original DVD/CD drive on my HP Pavilion dv4t-1300 laptop and need to transfer the form fitting face plate from the original drive onto the new drive. Old model #: AD-7561S. New model #: HP CT10L.

    Hi,
    Please use this book, it should tell you how (from page #57):
      http://h10032.www1.hp.com/ctg/Manual/c01597750.pdf
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • How do I set the default text in a bound textbox?

    How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?  I have the following code (see below), but for some reason it does work when I put the code in the AddNewItem_Click event; however, it does wor

  • How to change the column order in the DB?

    Hi all, For example,      there is an employee database with the field names empno(1),empname(2), empphone(3), empaddress(4), empsal(5). the values in the brackets are the column order i.e., the order in which the column names are placed.      I have

  • Structure of table and work area are not compatible - table control wizard

    Structure of table and work area are not compatible is the error i am getting when specifying my internal table and work area in my table control?  What am I doing wrong?

  • Couldn't be found on the server

    I am trying to update my Mac Pro and this message keeps coming up: The file "SecUpd2013-002.pkg" couldn't be found on the server "swcdn.apple.com".   I have updated my Mac many times and never had this problem before! Help!

  • Occasionaly my FCP does not save on exit, is it just me?

    On some occasions varies, fcp does not save on exit, it just goes. Other times its polite and says , wanna save ya changes mate? Yes there has been changes made cos on re open the stuff I done has gone! I do try and save manually as often as I can le