How do I replace the bumpers on my MacBook Pro

How do I replace the bottom bumpers on my MacBook Pro?

Common enough problem that Apple even decided to make it a DIY: http://support.apple.com/kb/HT5236

Similar Messages

  • How do i replace the battery in a Macbook Pro?

    Need to replace battery in my Macbook Pro. How do I do this?

    I would take it to an authorized service place (unless you have a very old MBP with a user replaceable battery).

  • How do i know if I need to replace the battery in my MacBook Pro?

    How do i know if I need to replace the battery in my MacBook Pro?

    There are a few ways (none of which are covered in the above link). On more recent OS X versions, when you click the battery icon in the menu bar you may see a "Service Battery" or "Replace Now" message. If you aren't seeing that, the system probably thinks the battery is fine.
    Also, in your System Information utility, there is a Power section that provides Health information for the battery, with a Condition status and Cycle Count. If the Condition is Normal and your battery is under 300 cycles (for removable batteries) or 1000 cycles (for non-removable batteries) it is not time to replace it yet.
    But of course, the other time to replace it is if you don't think you're getting the runtime you want out of it.
    If none of those is a problem, don't worry about it.

  • I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)?

    I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)? It does not have a CD drive.

    If all else fails, try this.  i used to do it all the time before. might or might not work with the new office.
    if you have access to another computer with a cd/dvd rom, copy the entire contents of the cd on a thumb drive.
    insert the thumb drive in your MB and do the install from there.
    However, if you have the newer version of MS Office, Bandit's suggestion is much better.

  • How do I change the name of my macbook pro?

    How do I change the name of my macbook pro.  My full name is listed on it and I want to change that.  In the upper right hand corner it is correct but all that lists is my login name.

    Mr. Pat, there are some people who still try to do that, but you are risking losing all your music, photos, email, etc. It is not for the faint of heart.  This page, albeit published in 2003 by Dr. Smoke, is still pretty valid, IMHO:
    http://thexlab.com/faqs/renamehomerecovery.html
    Here's the opening copy:
    Recover from renaming your Home folder
    It is a grave mistake to rename your Home folder -- changing its file name from johnsmith toJohn, for example -- in an attempt to change the short name for your account when using Mac® OS X.
    Here's a newer, last scary article from the Apple Knowledge Base:
    http://support.apple.com/kb/HT1428viewlocale=en_US&locale=en_US

  • How do I transfer the catalog in LR4 (macbook pro) to LR 5 on a iMac?

    How do I transfer the catalog in LR4 (macbook pro) to LR 5 on a iMac?

    http://www.lightroomqueen.com/2009/02/28/how-do-i-move-lightroom-to-a-new-computer/

  • How do we make the apple icon on Macbook pro?

    Hi, I wonder how I can make the apple icon on Macbook pro and how i make a heart ( not like this - <3) Someone knos what I have to do?

    Option-shft-K will get you the Apple logo in many, but not all, fonts.
    To find a font with a heart glyph use Character Viewer.
    Topher Kessler provides a how-to in this CNET article. He even uses "heart" in his search example.
    http://reviews.cnet.com/8301-13727_7-57353404-263/how-to-use-the-os-x-character- viewer/
    Matt

  • Ram? how do i find the type that my macbook pro has?

    ram? how do i find the type that my macbook pro has?
    and whats the best brand to use?
    thanks
    also what kind of express cards addons are available for the macbooks?
    thanks again

    A_MaStA wrote:
    You simply take out and look on the ram chip(s), the manufacturer's name should be all over the chip(s).
    Not very helpful. Micron / Crucial makes maybe 2000 RAM types. If all you have is the RAM and the label you may be thin on luck.
    Reading the manual +*that came with the mac*+ is one resource, regrettably rarely used before posting here.

  • HT1635 How do i find the make of my Macbook Pro?

    How do I find the make of my MacBook Pro 13-inch, Mid 2010?

    what do you mean by "the make"?

  • How do I clear the cache in my MacBook Pro 10.9 Maverick

    How do I clear the cache in my MacBook Pro 10.9 Maverick operating system? Can anyone provide step-by-step instructions. I'm a big dummy when it comes to this sort of thing.

    Hey DrSteveMc,
    Thanks for the question. The following resource outlines where the cache folder is stored. Note that the Library folder is hidden by default in OS X Mavericks. To access this folder, hold down option when clicking the Go menu in Finder:
    OS X Mavericks: What is the Library folder?
    http://support.apple.com/kb/PH14330
    Mac OS X: How to troubleshoot a software issue
    http://support.apple.com/kb/ht1199
    If the issue does not appear to be related to preferences, a login item, or a kext file, and still persists in Safe Mode, there may be an issue with a cache file in your home folder:
    1. From the Finder's Go menu, choose Home.
    2. Open the Library folder.
    3. Drag the Caches folder to the desktop.
    4. Attempt to reproduce the issue.
    5. If issue is resolved, drag the Caches folder to the Trash.
    6. If issue persists, from the Finder's Go menu, choose Go To Folder.
    7. Go to this folder: /Library
    8. Drag the Caches folder to the desktop.
    9. Attempt to reproduce the issue.
    10. If issue is resolved, drag the Caches folder to the Trash.
    11. If issue persists, go to step 4.
    Thanks,
    Matt M.

  • How do I disable the remote on my MacBook Pro

    How do I disable the remote on my MacBook Pro, every time I use my remote for my Apple TV iTunes starts playing.

    System Preferences --> Security & Privacy (click on lock in lower left corner and enter security info to make changes --> this will activate the "Advanced" button in the lower right corner --> click on it) --> Advanced --> Check the bottom box: "Disable remote control infrared receiver" --> Joy!

  • How do I check the Specs on my Macbook pro ?

    How do I check the Specs on my Macbook pro to make sure i have what i ordered? THe last time I wanted the SATA 7200rpm but they sent me the 5400. How do I see this on my mac? can't seem to find it.

    Here is something i copied from another forum site that could answer your question-
    Look in your "System Profiler", you can find it using Spotlight or looking for it in the Utilities folder, which is in your Applications folder.
    This will give you the model number, which you will then have to find online (probably using Google) to find out what speed that particular model number is.
    Then again, someone might have an easier answer.
    "That's exactly what I did. My MacBook Pro has a Seagate Momentus ST9160823AS Drive in it. Running that model number, it shows a 7200 RPM speed."

  • How do I stop the indexing on my MacBook Pro? It's been indexing for 2 days.

    How do I stop the indexing on my MacBook Pro? It's been indexing for 2 days.

    Step 1
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -F '$Time $Message' -k Sender mdworker -o -k Message Rne Norm -k Sender mds | tail | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. 
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.
    Step 2
    Enter the following command as in Step 1 and post the output:
    mdutil -as 2>&- | pbcopy
    You can then quit Terminal.
    Step 3
    Launch the Console application in the same way you launched Terminal. In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash reports related to Spotlight. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar. A Spotlight crash report has a name beginning in "mds" or "mdworker" and ending in ".crash". Select the most recent such report, if any, from the System and User subcategories and post the entire contents—the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

  • How do I reset the password for my MacBook Pro?

    How do I reset the password for my MacBook Pro?

    User password.
    An administrator can reset the passwords of other users.
    Choose Apple menu > System Preferences, click Users & Groups, click the lock to unlock it and provide an administrator name and password, select a user, and then click Reset Password.
    http://support.apple.com/kb/PH4562
    Administrator Password.
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

  • HT1527 I just brought a game for my MacBook Pro, however, after I purchase the game I notice it was for IPADS I brought it for my IPAD 2 yrs ago. So how do I get the game on my macbook pro or my money back.

    I just brought a game for my MacBook Pro, however, after I purchase the game, I notice it was for Ipad 2 years ago, So how do I get the game on my macbook pro or get my money back.

    Marilyn98 wrote:
    I just brought a game for my MacBook Pro,
    You mean you just bought a game though iTunes thinking it was for your MacBook Pro.
    So how do I get the game on my macbook pro
    You don't. You can go to Apple menu > App Store to purchase games for your MacBook.
    or get my money back.
    Contaact iTunes support here -> http://www.apple.com/support/itunes/contact/

Maybe you are looking for

  • Stock transfer valuation error at batch level

    Dear All, I have an issue with Stock valuation at batch level, when a site to site stock transfer is done in the ERP. As a consequence, Stock values in reporting are completely wrong. As a standard behavior for stock transfers, we have the following

  • Error in FCC in sender JMS adapter

    Dear all, We have IDoc flat file which is fixed field length but it has no field separators. It also doesnt have a carriage return(enter) after every segment ( say edi_dc40). In this case ,the FCC is giving error  " Missing Structure in Last recordse

  • Rescue & Recover: my newfound respect for this program

    For years, I've pretty much ignored RNR except for creating recovery disks (takes forever!) and the rare restore from the disks (takes even longer than forever!). Generally, Rescue & Recovery seemed a bit flaky and not always trustworthy. But, after

  • Parallel approval inWF

    my question is this: i want to send an activity to multiple approvers at same level for approval. these approvers i will get at run time. i have given multiline element in mislanious tab of that activity. it is working fine and activity is going to a

  • Result Handler in Synchronus Mode?

    Hi,       When i call the remote method from Flex to Java, a callback thread will be started which handles both the result and fault in 2 different methods. But i have a scenario like this. 1) Call the remote Method from Flex to Java through BlazeDS.