How do I reset my MacBook Pro (2008) after installing Mavericks?

Hello,
My MacBook Pro is very slow, which could be due to age.
However, before I just get a new one, I want to try to reset it and basically clean it properly. I have never done that and hope that this could be the solution to the issue.
However, I simply do not know how to do it.
I tried reinstalling Mavericks but it does not offer this option..
Help anyone?
Thank you very much,
Ingke

You need the original discs that shipped with your MacBook Pro in 2008. If you don't have them, you can call Apple (phone # at bottom of page) and, with your serial number handy, order a new set. Cost will be about $25 including shipping & taxes, I believe.
Once you have your original discs, follow the instructions in Thomas Reed's -> How to prepare your Mac for sale. After you've completed those steps, you'll have a 'clean' MacBook Pro, ready to install updates, software, etc.
Good luck,
Clinton

Similar Messages

  • How do I restore my macbook pro camera after installing mavericks?

    I am trying to fix various loss of peripherals following my upgrade to Mavericks. Does anyone know an easy way to restore the computer's camera?

    What other issues are you having?
    Here is the iSight support page. How to Troubleshoot iSight
    PJRS

  • My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

    My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

    We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
    What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
    What versions of iPhoto are on your iPhone and your Mac?
    however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
    On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll,  and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see:  Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
    To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
    -- Léonie

  • Can not open app store on macbook pro/imac after installing Mavericks

    I have just installed Mavericks on both a Macbook Pro and an iMac. I use the same Appleid on both.
    But now I can not open App Store
    I have tried clicking on the App Store symbol in the dock, starting it from the program folder in a Finder window, and starting it from the Apple menu. The result is the same: Nothing happens except that the menubar that was active before the attempt becomes inactive (dark). There is no App Store Window, and no App Store menubar.
    I have one idea why this happens. I removed the "OS X Mavericks" from the list of downloads/purchases in App Store by misstake before I installed Mavericks. If that is the problem how can I solve it?

    Ok, now it works again. I got a Notice that I could update some applications and I answered that I wanted to do that. Then, when I tried to start App Store the menubar showed up but no window. I choosed "Windows - Minimize", exited App Stored and started it again. And now it works - on both computers!

  • At startup I get grey screen and a folder with a flashing question mark.  How do I reset my MacBook Pro to the manufacture defaults?

    At startup I get grey screen and a folder with a flashing question mark.  How do I reset my MacBook Pro to the manufacture defaults?

    Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
    (113954)

  • HT201364 how do I reset my macbook pro to factory settings. Am currently using OS X Mavericks

    how do I reset my macbook pro to factory settings. Am currently using OS X Mavericks?

    Do you mean by "reset to factory settings" re-installing the OS X version it had originally?
    Phil

  • How can i reset my macbook pro without not deleting ilife pack?

    Hello ! my macbook pro(13) stars more slowly then before . i am sure there are many unnecessary files that should be deleted. i want my macbook pro to be lke the fist day. So how can i reset my macbook pro without not deleting the ilife pack. ?

    çağrı şahaplıoğlu wrote:
    Hello ! my macbook pro(13) stars more slowly then before .
    Your issue may not have anything to do with your files, it could be a corrupted cache file, reinstalling your OS and files from backup could be overkill and too much work.
    Run ALL of the free OnyX's checks, cleaning and maintainence aspects (not the log files) and reboot at the end.
    http://www.titanium.free.fr/
    Your machine will act a bit slow until the caches and spotlight are rebuilt, but it should act faster
    Your next step is to use OnyX Verify Preferences and "show only corrupt plist" files
    If you find some, make a note of their location and remove then to your desktop and reboot and start the programs responsible, reset your preferences.

  • How do restore factory settinngs ( macbook pro retina) after i used migrate wrongly

    how do restore factory settinngs ( macbook pro retina) after i used migrate wrongly. and want to start from the original

    Use Lion Recovery to reformat the drive.

  • Unable to sync with MacBook Pro even after installing Po...

    Unable to sync with MacBook Pro even after installing PocketMac

    why don't you post the same thing again (since you posted it 3 times already)?
    perhaps whole you're at it you could post some useful information to get advice like Mac OS, Device, Device OS, other sync software installed...
    4.6.1.305 hybrid
    Mac Pro 2X2.8 Quad SL

  • How can i reset my macbook pro without the disc?

    trying to reset a macbook pro to factory settings without a disc

    You can get a set of discs specific to your machine by calling Apple. Cost is about $20, I believe. Be sure and have your serial number handy.
    Then take a look at Thomas Reed's How to prepare your Mac for sale - that may not be exactly what you're doing but it will give your machine that factory-fresh feel.
    Good luck,
    Clinton

  • How do i reset a macbook pro to the factory settings

    How do I reset a Macbook to the original factory settings?

    Restore to original:
    Boot from your grey installer DVD disc 1, or SL retail installer disc (hold down the C key on startup or hold down Alt/option on start and choose the installer disc).
    OK the language page (if present).
    From the installer screen, do not click 'continue' - go to the menu bar and choose Disk Utility; depending on the OS version it may be in the Utilities menu or Tools menu.
    In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
    Run Repair Disk (not permissions). If that comes up as disk OK;
    Click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need. Go to the options button and ensure that the partition scheme is GUID  and the file system to Mac OS Extended (Journalled).
    Name the partiton (usually Macintosh HD), click Apply.
    When that's finished, select the new volume in the sidebar (indented to the right below the drive) and go to the Erase tab.
    Select Security options and select zero data (one pass is more than sufficient). Click erase. That will take quite some time; probably measured in hours and dependant on the size of the drive.
    (The purpose of this step is to ensure there is no recoverable data left on the drive).
    When that's completed, close DU and continue with the installation.
    When installation is complete, after the restart ignore the setup assistant and shut down the Mac (you may have to do this by holding down the power button).
    The Mac is now ready for the new owner to personalise it as if new.
    Be sure to pass on the original grey discs with the Mac, and the SL retail disc if you loaded SL.

  • How do I reset my Macbook Pro

    I have owned my Macbook Pro since around the end of 2012, and I would like to reset it, as it has recently been slowing down, along with booting up and shutting down slowly, and opening any application takes around 1 minute. I would like to know how to reset it with ease. The problem is, is that I don't know if i need an External drive to back up my content. Most of the Files on my macbook can be easily re-downloaded, and I have enought room on an 8 gigabyte USB to store the important files. Also, I have a copy of Word, and I wanted to know If after I reset my computer, will I still be able to use he same copy registered to me. I have the Install disc and it came with 3 copies of Word. I used one when I got my computer. Sorry that all of it is kinda out of order, as this is my first time doing this. Thanks

    You should always have a backup of you data.  It is best if you have two backups.  All HDDs will eventually fail.
    If by 'reset' you wish to delete everything from the HDD and reinstall as if 'out of the box', I would first urge you to read this comprehensive document and see if there may be easier ways of restoring performance to your MBP.  Usually the HDD is a good place to start.
    https://discussions.apple.com/docs/DOC-3521
    You certainly should be able to continue using all third party applications, including Word. 
    Ciao.

  • How do I reset a MacBook Pro w/retina display to factory defaults?

    We just got a MacBook Pro for my daughter and she used the migration assistant for bringning things to it.  If she wants to start over how do I reset the machine to it's factory defaults?

    Boot into the Recovery Partition:
    - Power on.
    - When you hear the chime, hold down the Command and R keys simultaneously.
    Run Disk Utility.
    - Select the internal drive (upper left disk icon).
    - Erase tab.
    - Format: Mac OS Extended Journaled.
    - Name: Macintosh HD.
    - Erase…
    Quit Disk Utility.
    Run Reinstall Install OS X and follow the directions.

  • How can i reset the macbook pro

    my macbook pro mid 2009 has completely stopped booting up, i need to reset it somehow, i know there is a key combination to do so but i don't know it, can anyone help me with that.
    thanks

    tamerfromwinston salem wrote:
    my macbook pro mid 2009 has completely stopped booting up, i need to reset it somehow, i know there is a key combination to do so but i don't know it, can anyone help me with that.
    thanks
    Not sure what you mean by reset your MacBook. I would begin with Repair Disk
    Insert Installer disk and Restart, holding down the "C"key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu(Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it says anything but<b>Verified</b>)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports diskis repaired.
    If DU reports errors it cannot repair you will need touse a utility like TechTool Pro or DiskWarrior
    Please do post back with further questions or comments.
    cornelius

  • 2008 macbook pro beeps after installing new hard drive

    I install a new hard drive in a 2008 macbook pro and it just beeps. three quick beeps repeatedly. I cloned the new drive from my 2011 macbook pro
    Is anybody experience this same problem? please help
    thank you

    You can't reliably use the clone from one Mac on another Mac of a different vintage.  Boot off an external hard drive after installing the operating system from Apple or the original discs on the external hard drive, and use the migration assistent to import data from the internal hard drive.  You'll want to make sure the copy on the external hard drive does not excede the internal hard drive capacity by more than 85% before cloning and overwriting its contents.

Maybe you are looking for

  • ME2K - Multiple Asset selection

    Hi All, I need a report of Purchase order value (Total Value of P.O) based on Asset number. When I run ME2k I get a breakdown of line item values. But I need the total value of the P.O. currently system is displaying the net price of line item.  I kn

  • Append New Line Item(s) onto the created Purchase Request using Function

    Dear Expert, I am trying to append new lines into the created purchase request via Function Module/ BAPI. Say, now, the Purchase Request has already 1 line item. And i want to append new line items into this purchase request via function module/ bapi

  • Does Nokia 6234 support the bluetooth PBAP profile...

    Can you help ? And, in negative case, how can I get the full list of Nokia phones that support the PBAP functionality ? Thank you !

  • Has anyone got the Lion Server wiki to work?

    I can get the Lion Server wiki to work on the default website, but cannot figure out how to get it to work on an additional website I have created in the Server app.  Has anyone got this to work?  If so, how do you do it?  I imagine it has something

  • SAP Printing problem

    Hi friends, I have a problem with saplpd. When ever my user tries to take print with the output device LOCL, the user is not getting the printout . Following is the saplpd error messages: <b>"Error:StartPage failed ret=0,error =Overlapped I/O Operati