How do I resize an image on the photo layer?

I am trying to resize an imported image to fit in with my current shapes. Is there a way to do this? I have tried pinching the image on the screen but to no avail.

You have to resize the whole layer. Tap the three dots on the right of the layer in the Layers panel. Then tap the cross on the left of that menu. You can then pinch to resize the layer

Similar Messages

How can I resize an image in the header?

I have uploaded my organization's logo into our document, but it is out of proportion to the rest of the document. I've delted it and uploaded smaller versions of the logo and it is still too big. How can I format the image in the header so that it is more reasonably sized?

Thanks. The triangle was buried in the image. If you hadn’t told me where to look, I would never have found it!
Michelle
Michelle Lancto
Jewish Endowment Foundation
a division of the Jewish Federation of Western Massachusetts
Phone: 413-732-9994 Fax: 413-737-4348
<mailto:[email protected]> [email protected]
<http://www.jefwesternmass.org/> www.jefwesternmass.org
<http://www.jewishwesternmass.org/> www.jewishwesternmass.org
JEF_Logos_1101_JFWM for email LOW RES
Confidentiality Notice
The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies.

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

I think others would be able to help if you describe a little more why you'd like to do this. Given that drop zones are a way of passing images into Motion that you want to manipulate, resizing a drop zone is the equivalent of resizing the image.
If you're having a problem with an image from Final Cut being too big or too small, select the Drop Zone in the inspector and make sure the Fit parameter is set to 'Fit' - 'Center' will result in images dropped not being scaled to fit the Drop Zone. 'Stretch' will force the dropped image to fill the space defined by the drop zone,
If the image is already cropped and scaled up in Final Cut Pro, that is the information that Motion gets - you can't scale down the image to see more of the edges that have been cropped off.
If you want more than one copy of the image passed via the drop zone, use Make Clone Layer from the Object menu.

How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

Hi Peru Bob,
I've tried two images, the results were:
Image 1
Jpg, original file size 923KB, dimensions 848px x 279px.
After resizing to 848px x 180px with 72dpi, the file size decreased to 164KB.
Image 2
Jpg, original file size 809KB, dimensions 1200px x 1800px.
After resizing to 668px x 722px with 72dpi, the file size decreased to 307KB.
So, there seems to be a fair file size loss - is this to be expected?

How can I resize my image?

How can I resize my image to be smaller?

You asked about changing the file size
To change the size in Pixels, you use the options at Size in the export dialogue
Regards
TD

How do I substract an image at the time t with an image at t-1 to detect move in a grab acquisition

After the VI acquire in a grab acquisition, how do I substract an image at the time t with an image at t-1 to detect the movement in the scene?

Hello,
One way of doing that is to do a ring acquisition with two buffers. At anytime one of your buffers will be the most current frame and the other will be one before the most current. Having both buffers available at anytime in your code you can call IMAQ Subtract.
Hope this helps!
Yusuf C.
Applications Engineering
National Instruments

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

How can I attach an image without the image is in the email body? (using the new mail the Lion)

How can I attach an image without the image is in the email body? (using the new mail the Lion)
I want in attachment, not in the body mail.

I think your only solution is to zip the image files first and then attach them.
Read this from a site I found:
Sending Graphical Attachments -- When you attach a graphical image to your message, the recipient of your message sees the image inline (that is, in the body of the message) if her email client supports inline display. ("Take Control of Email with Apple Mail" contains a table listing the capabilities of popular Mac and PC email clients.) If a client does not support inline display (or the recipient has turned off the inline display option), the file appears as an attachment that must be opened in a separate program.
On the one hand, an inline image is easier for the recipient to see - all she has to do is look at it. On the other hand, inline images can be frustrating to scroll through. If you do not wish to send a graphical image inline, you must compress the file before attaching it - Mail, sadly, lacks a built-in compression option, though fortunately for Panther users, the Finder offers Zip compression without requiring a separate application.
Note that when you compose a new message, Mail always shows attachments in the body of your message. You can manually drag them somewhere else, but many email clients display all attachments in a separate list, regardless of where you place them in the message body.
If you paste an image into a message or drag & drop an image from another window (say, a Web browser), Mail converts the raw image data to an attachment in TIFF format. On the other hand, if you drag & drop the icon of an image file (or use the Attach button to locate the file using the file browser), Mail leaves the attached image in its original format. This difference is significant, because although most email clients can display JPEG images just fine, support for TIFF - especially in non-Mac email clients - is less common. If possible, I suggest attaching image files as opposed to pasting or dragging in raw image data.

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

There are a number of third party solutions for this. I just use Bridge, so can't recommend one in particular.

How do you add an image in the signature

Hi,
How do you add an image to the signature area.
The Insert/edit image is not available when in My Settings | Personnel Info | Signature
Regards
Ray Farmer

You need to link the image. See the example for the Canada flag below.
<img src="http://forums.ni.com/ni/attachments/ni/130/6908/1/Canada-small.PNG" border=0>
Replace with the image you like. This goes into the signature box within the profile tab of the personal settings.
RayR

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
       if( i != (nSpotChannel - 1) )
             overlay[i].next = overlay + i + 1;
       else
       overlay[i].next = NULL;
       overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
       overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
       overlay[i].colBytes = 1;
       overlay[i].r = 230;
       overlay[i].g = 161;
       overlay[i].b = 174;
       overlay[i].opacity = 255;
       overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

How do you show thumbnail images for the contacts?

How do you show thumbnail images for the contacts on the iPod?
-Thank You

In another thread I posted a suggestion to try when the iPhoto app in the Application folder will not work:
after upgrading the OS, iPhotos (and Aperture for that matter) should still be in the Applications folder...
And running well in 10.10.3.
If it stops running in a next "update" do not throw it away: most apps will continue running as follows:
In the Applications folder "rightclick" (CTL+click) the iPhoto app, then "show package contents", then click the MacOs folder open: you see the real app (dark grey), rightclick this and choose "make alias", an alias is made, move this alias to the Applications folder and use it to run iPhoto.
Same for Aperture.
In older OS this survived several upgrades....
Lex

How do you set a image in the background of a JTextfield?

How do you set a image in the background of a JTextfield? Any ideas?

You can't thats why it is called textfield!!!
Take a look at JScrollPane API for this

How do you set an image into the background of a JPanel or JFrame?

How do you set an image into the background of a JPanel or JFrame?

Something like this, Ive thrown in an ImageIcon on a
button too for good measure.
import java.awt.*;
import javax.swing.*;
public class JFrameImage extends JFrame {
public JFrameImage() {
Container c    = getContentPane();
JPanel panel = new JPanel(){
             public void paintComponent(Graphics g)     {
ImageIcon img = new
= new ImageIcon("background.jpg");
                  g.drawImage(img.getImage(), 0, 0, null);
                  super.paintComponent(g);
        panel.setOpaque(false);
ImageIcon icon = new ImageIcon("onButton.jpg");
JButton button = new JButton(icon);
panel.add(button);
c.add(panel);
public static void main(String[] args) {
JFrameImage frame = new JFrameImage();
frame.setSize(200,200);
frame.setVisible(true);
Going totally fancy pants
ImageIcon bigImage = new ImageIcon(bgImage.getImage().getScaledInstance(getWidth(), getHeight(),Image.SCALE_REPLICATE));
g.drawImage(bigImage.getImage(), 0, 0, this); Will scale the image to the size of the panel
whereas
for (int y = 0; y < getHeight(); y = y + image.getHeight(null))
for (int x = 0; x< getWidth(); x = x + image.getWidth(null))
g.drawImage(image, x, y, this); Will give a tiled effect
Try tiling with an animated gif and bring your processor to a standstill.

How do I resize an image on the photo layer?

Similar Messages

Maybe you are looking for