How do I restore backup swm files created during system recovery from external hard drive

Good day,
I was facing some problems with my laptop (HP Envy 17 3D Notebook with windows 7 home premium, 64 bit) and I had to return it back to its original state using system recovery.
During the process I was asked if I want to back up my data. I have chosen to backup my data in the flash drive. Once the process has completed and my laptop is to the original state, I tried to recover my backup but it tells me:
The version of this file is not compatible with the version of windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
If i click run as administrator it tell me:
Windows cannot find 'F:\Backup_2015-04-29 143842\Restore.exe'. Make sure you typed the name correctly, and then try again.
there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else.
any help will be greatly appriciated.

Hi @Jef35,
Welcome to the HP Forums!
It is a superb  place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that while doing the recovery back to factory you opted to backup your personal files  and would now like to know how to restore them .
Here is a link to  HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
If you appreciate my responding, please click the kudos button below to say thanks.
If this resolved your difficulty please select solution provided to enable other posters to locate this information more easily.
I hope this helps
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • How do I restore backup1.swm files created during system recovery from external hard drive.

    On my hp dm1 with windows 7 In full detail, this is what I did. I clicked to do a system recovery, it asked if I wanted to backup the files, I said yes. It said it backed up my files on the external hard drive. I continued the system recovery. It set my computer back to factory settings. I tried to recover my backup, it acted like it was restoring the files and showed them going into the c: area in a folder. I open the folder and it says the folder is empty. I hit properties and the folder contains 10mb+ of data. I go back into my LaCie drive, there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else. Have a 12 page research paper in these back ups that is due in a few hours so any help will be greatly appriciated.

    @Daniella1985,
    If the standard procdure of locating the program launcher (a .exe file) on the first backup media (disk 1 or the external storage device) is not working, then you can manually extract the files using 7-zip.
    7-zip can be found here.
    Once 7-zip is installed, open it and navigate to the first .swm file of the backup.  Right-click the .swm file and select 7-zip>open archive.  Once that opens, it should reveal the contents of the .swm files.  If the file contains something you want to keep, you can either extract each invidual file or extract the entire directory.  If you want to extract each individual file, highlight the desired file and click the extract button at the top.  If you want to extract the entire directory, make sure no items are highlighted and click the extract  button at the top. 
    This is a manual process and it can be a large task depending on how many files were backed up, but it is one method to get the backedup files when the standard procedure is not working.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • How can I change the source file so it is direct from external hard drive?

    I am trying to make a movie on imovie of a snowboarding trip that I went on, there is around 80 to 100 gig of mp4 movies that will not fit on my computer that I have stored on my external harddrive. I had the movie half finished then found I could do no more as I had no space left in my mac. I had to delete everything and start again but I'm not doing this until I can find a way of changing the source file so I can take them direct from my external hard drive as to not use up all my computers available space. I have moved imovie to my external hard drive but it still tries to read from a movie file on my mac, how can I change that so it will read from a source file on my external hard drive, is it possible?? Can someone help me??

    Hi Bengt, Thanks for your input, much appreciated.
    I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help.

  • How can I get Itunes to just create a route to an external hard drive instead of copying all my music onto my internal disc?

    I have been trying to start using Itunes again, I have a large amount of music on external hard drives and not a large amount of disc space, on my windows version Itunes could use it's library in the hard drive so Itunes would use a directory path to the song file. When trying to import onto my Macbook Air it keeps trying to copy the song files, resulting in a message that says I haven't got enough disc space.
    Any Ideas?
    Kind Regards,
    MEJM1

    One approach:
    Open the menu Edit > Preferences...
    Select the Advanced tab.
    Uncheck Copy files to iTunes Media folder when adding to library.
    This will stop iTunes from wanting to copy everything onto the internal drive any time you add content. This is marginally easier than remembering to hold down the ALT key, however in this scheme iTunes Store purchases, podcasts etc. would still end up on the internal drive.
    Alternatively you can store the entire library on the external drive. Close iTunes if it is open, then copy the existing iTunes folder from your profile to the root of the external drive. Click the icon to launch iTunes and immediately hold down the Option key so that you get the following dialog box:
    Click Choose Library... browse to /iTunes on the external drive and select the library file iTunes Library. Now that library is on the external you can move any new content you want to add to the library into the folder /iTunes/iTunes Media/Automatically add to iTunes to have it added to the library and organized by it without creating duplicates, or filling up the internal drive.
    Ideally you should get another drive so that you can make a backup copy of your library on a separate physical disk.
    tt2

  • How do you restore your playlists on iTunes after moving data to external hard drive and the playlists are deleted?

    after moving everything to an external hard drive, is there a way to restore the playlists you've already created if they're not there anymore?

    If you moved the iTunes folder to your external drive, you moved the iTunes library file - iTunes Library.itl, which is in that folder.
    You need to tell iTunes where it is, start iTunes with the shift key held down and iTunes should ask you to choose a library.

  • How do I transfer imovie projects and events to new mac from external hard drive

    bought a  macbook pro retina.  backed up 3yr old macbook pro to external hard drive.  how do I transfer imovie projects and events to new mac?  thanks!

    Hi dalbatross,
    Welcome to the Support Communities!
    Did you set up your new computer by creating a Time Machine backup and restoring from it?
    If so, the Events and Projects that were on your internal Macintosh HD would copied to your new computer.
    Here is another way to copy the events & projects to the new computer from the external drive:
    iMovie Help: Work with multiple libraries
    http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
    Copy or move projects, events, or clips between libraries or hard disks
    Connect a hard disk that contains the target library to your computer, or copy the target library to your computer.
    Choose File > Open Library, and choose an option from the submenu.You can choose from recently opened libraries at the top of the submenu, locate an existing library on your computer, or create a new library.
    The selected library is opened in the Libraries list, with the first event selected and its contents displayed in the browser.
    In the Libraries list, select the event that contains the item you want to move or copy.
    In the browser, select the item you want to move or copy.Note:  To select multiple items, hold down the Command key as you click the items you want to select, or drag a selection rectangle around the items.
    Do one of the following:
    To move items between events or libraries: Drag the clip or project to another event or library.
    To copy items between events or libraries: Option-drag the clip or project to another event or library by first starting to drag and then holding down the Option key as you drag.
    Cheers,
    - Judy

  • How do i get itunes 11 to stop adding music played from external hard drive to itunes library

    I use itunes 11 to play music from my external hard drive and when i am finished using the hard drive and disconnect it the artist and songs appear in the itunes libary and when i click on it to play them it cannot locate the file and i assume this is becuse under the advanced prefrences tab i unchecked the auomaticly add played music to itunes library. I do not want my external hard drive music to be added to itunes library which at this point it does not but it is still showing the music in the library even though it cannot be played this is very fustrating please help. how do i get the artist and songs played from the external hardrive from appering in the itunes library.

    Do you have a working copy of the library anywhere? The key file is called iTunes Library.itl and normally exists inside <User's Music>\iTunes. This is the file that knows what is in your library and each of the playlists, and holds ratings, play counts etc. Changing the media folder path in preferences tells iTunes where you'd like it to store media in future. It doesn't magically connect iTunes to any media that might already be there, or fix links to media that has been moved, or make it pick up a non-existent library file. If the worst comes to it you will need to import the media into the new empty library.
    See Recover your iTunes library from your iPod or iOS device if you have any of these to recover ratings, play stats and playlists, and to associate your device with the new library.
    tt2

  • How do I import movie event to iMovie 9.0.9 from external hard drive back up copy

    I was using an external hard drive as my primary location for iMovie events and projects when that hard drive crashed.  I was able to recover the data and save it to a new hard drive, but now iMovie 9.0.9 does not recognize the iMovie Events that were recovered and saved on the new hard drive (because iMovie didn't place them there in the first place).  The recovered iMovie Projects work fine, but when I put the iMovie events into a folder called "iMovie Events" on the external hard drive, iMovie doesn't recognize them.  In iMovie, under Events, I can see the name of the recovered iMovie Event, but when I click on it, it says no movie clips available.
    I have a 2010 mac Mini with OS X 10.9., and haven't upgraded to iMovie 11 yet because when I tried, it mixed up the iMovie events and I couldn't see them all.
    I appreciate your help.

    That's the way they appear.  In the <event name> folder, there are the clips and a few subfolders including Thumbnails and something else (I'm not in front of my mac right now).  One other thing: the projects that use these events work.  I can play the project, i just can't see the clips in the Events section.  Unfortunately I hadn't gotten around to creating projects from all of these events yet, so i only some of the events have corresponding projects.
    When I drag the <event name> folder into the iMovie Events folder and then run iMovie, an event icon will appear for that event (in current year 2014, even though the event may be years old), but I can't play or see the clips.  Any other suggestions?
    Thanks again.

  • Mp3 files wont import into itunes from external hard drive

    I just switched from PC to Mac and have the new aluminium mac book.For my PC I had all my music stored on my external hard drive.I have begun transferring most of it to itunes,but some of the files since hooking my external hard drive to my Mac book have turned into 'Apple Files' which appear to be document files as opposed to music files.Is there a way that i can convert them into the itunes format?
    Message was edited by: KatesM

    WMA is not supported directly by iTunes. In iTunes for Windows, you can convert (but not play) these files, as long as they're not copy protected, to an iTunes-supported format.
    Short of running Windows on your new Mac and handling this with iTunes for Windows, or using another (your old?) PC to convert the WMA files to another format (I would suggest using Apple Lossless, as otherwise you will lose some sound quality unnecessarily--unless the WMAs are WMA Lossless...), your only other option would be to play the files with software for OS X other than iTunes. In that case, you might consider VLC, which is handy for almost countless other audio and video files anyway.

  • File not found after importing from external hard drive

    I have been importing music from an external hard drive into my Itunes account.  Some of the songs transfer fine, but some of them show up in Itunes as being imported, but when I go to listen to them I get a file not found message because the original file cannot be found.  If I have the hard drive plugged in there is no problem, but without it I get that message. 
    Any advice?  I"d really like to get all music set up in Itunes.

    Search Amazon - Davie Pogue I believe has released the missing manual for Leopard - it is a good general reference Liz Castro did a great book on iPhoto 05 but has not done one for '08 as of now
    The iPhoto Help section is very helpful
    Reading this forum will teach you a lot about iPhoto
    If you have not taken the iPhoto tutorials yet you should - http://www.apple.com/support/iphoto/
    Make mistakes and fix them - that's the way I do it
    LN

  • How can I set up SMB file sharing to share my PC external hard drive on my Mac with no password protection?

    I am having the worst trouble with two things. I am very aware how to get the server to show up via SMB, but every time I log off the Macbook, the server's disappear. OK, so I went into "System Preferences" and hit "Users and Accounts" and added the server as a log in item. Worked well, except how do I stop that password prompt from coming up? I am using a Guest account with no password but I continue to get the password prompt. There is nowhere to hit remember password or anything. I have the option to remember the password in the keychain but I have no way of preventing the pop up.
    Another issue I'm having is I have a Canon Pixma MP620 printer connected to my PC through USB. Three other PC's can connect wirelessly to print through the home network. My Mac does not find the printer, and when I manually add it, it recognizes it but WILL NOT print. It comes up with error messages like Authentican Required and connection issues between printers.
    I have no password protection on my PC and have enabled sharing of all devices and folders through the Homegroup on the PC. I just can't figure it out. I am new to Mac and would love to get these two things figured out.
    Thanks in advance for reading!

    Hi Bengt, Thanks for your input, much appreciated.
    I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help.

  • How to full restore from external hard drive backup

    I'm a new MAC user and got myself in a mess where i need to perform full backup restore from external hard drive. Last back via time machine to external drive was 2 days ago, so the data is there.
    What are the MAC boot commands to get me to system restore options. And there any useful tips you can pass on.

    http://www.macworld.com/article/1165784/how_to_restore_data_from_time_machine.ht ml

  • Can't create new folder on an external hard drive, and how to transfer files?

    Hello everyone,
    the non-English speaking videographer I translate for is having problems operating his Premiere CS5 for Mac from an external hard drive. He cannot create new folder on the external hard drive (the "New Folder" button is grayed-out when tries to export media onto the external hard drive) and when he simply tries to create new folder, the "new folder" option isn't available.
    He suspects it's because the hard drive was formatted for PC.
    Questions:
    - should PC-formatting cause that problem?
    - what's the proper way to transfer media files from PC-formatted external hard drive to the internal hard drive on Mac?
    Would appreciate your advice.
    Dimitri Vorontzov

    He is right on the money
    Now, for the sad or FAT part. You need to format the drive as FAT32 to make it work both on PC and MAC but, and that is a big BUT, the max file size of any given file will be 4GB. I haven't treid other formats yet, like the journaled MAC OS extended, but I don't think that would work. We transfer our files through or own gigabit network so I never had to try it, other than FAT32 formatted SDHC cards.

  • HT3275 When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option.  How do I change this?

    When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option.  How do I change this?  My external hard drive is a FreeAgent GoFlex Drive.

    Hi, what Format is the external Drive?
    They usually come PC Formatted for Fat32/MSdos, or NTFS... is there anything on it now?
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html

  • Hi,disc wiped ,OSX10.9 back on ,how do I restore my data from external hard drive ?Any help welcome .

    Hi,disc wiped ,OSX10.9 back on ,how do I restore my data from external hard drive ?Any help welcome .

    There's Setup Assistant and Migration Assistant. The cleanest way to do it is Setup Assistant, but you only get that option once when you fire up a fresh install of OSX. If you're past that, you could reinstall OSX by booting with Command-R, or you could use Migration Assistant.
    Setup/Migration Assistant instructions:
    http://support.apple.com/kb/HT5872

Maybe you are looking for