How do I search and zoom to a text in a PDF document when I call the PDF document (in a shared location) from a web application(written in C#)?

The location is something like this:
\\XXX.XX.com\YY_YY_Docs\images\ZZZ_00001.pdf
and I tried ( http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdf_open_parameters.pdf)
\\XXX.XX.com\YY_YY_Docs\images\ZZZ_00001.pdf#zoom=800&search=22-55
but it only opens the document in the browser but does not zoom to it or search the text. How do I achieve this?
Assuming not all the users have acrobat reader installed and opening the PDF in a browser with the Adobe reader add-on installed.

Well, you need a PDF viewer – and that would be Adobe Reader.
Those parameters only work for web-served documents, not for local ones.

Similar Messages

  • How can I search and replace fonts?

    iOS 7 doesn't support the Adobe workhorse fonts I've most relied on for years, and arbitrarily changes them to iOS built-in fonts when I link my standard documents and templates to the iPhone, via iCloud. There's no apparent logic to how it does this; a Pages document in Minion Pro, a serif font, gets changed to the sans-serif Helvetica. Myriad Pro may come out in Times New Roman. I accept that the iPhone's limited number of fonts makes translation necessary, but does Pages offer a way in which I can search and replace inappropriately substituted fonts for more logical alternatives?

    You noticed the first one yourself: the Found item list seems to randomly jump around the document -- I believe you are correct in your observation it may be due to the object construction order. That tells me, by the way, something about your lot numbers that tou didn't mention: your text is not one continuous long threaded story, but it's all or partially in disconnected etxt frames. The Found list does return everything inside a single story in the correct order, but it goes over each separate story in the order they were constructed.
    The only solution is to gather all of your lot numbers, *re-sort* them according to the page number they appear on (and some sort of Worst Case Scenario is when you might have more than one lot number frame per page; in that case you also need to sort by textframe, top to bottom -- yet even worse is if you also may have these textframes side by side!).
    Only then you have a reliable counting order.
    This isn't too bad. We can just extend the method I offered for sorting top-to-bottom/left-to-right in Re: Working around the frame selection order issue in CS 4 and make it also include page numbers:
    function byPageYX(a,b) {
        var
            aP = a.parentTextFrames[0].parentPage.index,
            bP = b.parentTextFrames[0].parentPage.index,
            aY = a.baseline[0],
            bY = b.baseline[0],
            aX = a.horizontalOffset[1],
            bX = b.horizontalOffset[1],
            dP = aP-bP,
            dy = aY-bY,
            dx = aX-bX;
        return dP?dP:(dy?dy:dx);
    myResults.sort(byPageYX);
    Or something like that.
    As for actually implementing the above I cannot be of any help with Applescript.
    Once we're dealing with sorting I think you're much better off in Javascript anyhow.

  • How do you pan and/zoom an image--the "Ken Burns" effect?

    How do you pan and/zoom an image--the "Ken Burns" effect?

    Frequently answered question
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 250 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • How do I search and install ebooks

    How do I search and install ebooks

    Adobe Reader is a free PDF viewer but not an eBook reader.
    Adobe Digital Editions is an eBook reader.  But it does not support iOS (iPad/iPhone) or Android.  So if you are looking for eBook readers on iOS, I'd recommend that you search in App Store on your iPad/iPhone.

  • How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

    How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP?  I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

    The new serial number is to the right of your chosen download.

  • OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2.  need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

    OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
    I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
    Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
    Anyone know of any way to avoid that?

    Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
    Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

  • I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone.  I don't want her contacts! How do I get rid?

    I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone.  I don't want her contacts! How do I get rid?

    Hi,
    You have 2 solutions:
    1 - You can use 2 differents icloud account
    2 - You use the same account but you don't sync yours contacts.
    You configure that in  Settings > icloud
    You activate or desactivate what you want.
    Have a nice day.

  • The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size.  How do I get the thumbnails back to the standard size and be able to work with them?

    The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size.  How do I get the thumbnails back to the standard size and be able to work with the photo files?

    What version of iPhoto and system are you running?  On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
    2 - It may take 2-3 attempts so don't give up after only one attempt.
    OT

  • SAPScript: how tu adjust heigh and width of standard text (logo)?

    Hi!
    how to adjust heigh and width of standard text (logo)?
    I do not want to edit the logo, because it is used elsewhere, so I need to adjust heigh and width when using it in a form.
    For now stadard text comes over the window. Here is how I use it:
    INCLUDE ZHEX-LOGO OBJECT TEXT ID ST
    Will reward,
    Mindaugas

    Hi Mindaugas,
    While uploading using RSTXLDMC. You have to maintain your size of the logo.
    Go through below mentioned document.
    Upload TIFF files to SAPscript texts
    Description
    The report RSTXLDMC allows a TIFF graphics file to be uploaded from the file system of the R/3 GUI to a standard text in the R/3 word processor SAPscript. (TIFF is a registered trademark of the Aldus Corporation.)
    When uploading, the TIFF graphic is converted either into a black and white raster image (parameter type=BMON ) or as a color raster image with a maximum of 256 colors (parameter type=BCOL).
    The black and white raster images ( BMON) can be printed using the following printer types:
    PCL-5 printer
    PostScript printer
    Kyocera PRESCRIBE printer
    Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95)
    The color raster images (BCOL) can be printed using the following printer types:
    PCL-5 printer with color capability (e.g. HP Color LaserJet). Color graphics are not printed properly on monochrome PCL-5 printers (e.g. HP LaserJet 5), because the printer cannot set the color palette as required and does not perform any gray-level conversion.
    PostScript printer (color graphics are automatically converted to gray levels on black and white printers using PostScript) Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95) During TIFF graphic import, the basic set " Baseline TIFF 6.0 " of the TIFF specification 6.0 is supported.
    To maintain compatibility with earlier versions of the report RSTXLDMC, it is also possible to convert the TIFF graphic directly into a black and white raster image for a particular printer type when uploading. These are the three printer types PCL-5 (parameter type=PCL ), PostScript (parameter type=POST) and Kyocera PRESCRIBE (parameter type=PRES ). A raster image uploaded in this manner can only be printed using the appropriate printer type.
    Besides TIFF raster graphics, direct printer commands in the respective printer language (PCL-5, PostScript or Prescribe) can also be contained in the file which is to be uploaded (printer macros). They are then transferred to the standard text unmodified.
    The graphics are output by inserting the standard text into the document which is to be printed, directly or using an INCLUDE command. The printer commands, which for example draw a company logo on the page, are only output if the print request is processed by the printer driver corresponding to the macro type, otherwise they are ignored. Example: A macro of type PCL is contained in a print request. If the request is output to a printer with type HPLJIIID (to which the driver HPL2 is assigned), the macro data is sent to the printer. If the request is printed on a printer of type POSTSCPT (to which the driver POST is assigned), the output of the macro data is suppressed.
    In the standard text, the printer commands are inserted between the HEX ... ENDHEX command lines in hex notation. Various report parameters allow the graphic or printer macro to be placed on the page or at the current text position. Note: When the /:HEX command line which precedes the macro appears in the text, a line break is generally made before the graphic is output. The output of the macro therefore begins in the next text line at the left window border of the current page window, as long as a shift to the right is not specified (see below).
    If your own printer macros are uploaded and not TIFF files, you must ensure yourself that the normal (text) output of the driver is not impaired when the printer commands are inserted in the output from the uploaded file. The printer drivers pass the data contained in the file to the printer unmodified, therefore without control over the individual actions this triggers on the printer. For example, syntax errors should not be generated by the PostScript commands (type POST), or form feeds should not be contained in the file (unless this was intended) for PCL-5 (type PCL).
    Restrictions:
    In general, the output of graphics generated via RSTXLDMC from R/3 is not suitable for mass printing (that is, unless you are using the "Graphic resident on printer" feature): the R/3 spooler has to hold significantly more data in its output files. If the graphics occur several times in a spool request, the data also reoccurs. Apart from this, the network is more heavily loaded in sending the increased volume of data to the printer and the printer output is slowed significantly (varies according to printer model) if raster graphics are output as well as the text.
    If your graphics reside on your printer during a printing job, the degree of 'correctness' with which they are printed depends on the amount of memory available in your printer. R/3 print drivers are unable to determine whether the amount of memory available is enough! If one of the graphics that you have marked as resident is not displayed, try reloading the graphic and switching off the parameter "Graphic resident on printer".
    When printing black and white graphics on PCL-5 printers, image data is compressed in order to greatly reduce the file size.
    The output of graphics and macros on PCL-5 printers, PostScript printers and device type SAPWIN (type BMON, BCOL, PCL, POST) is adapted to the page orientation used, that is if landscape is used instead of portrait, the graphic is also turned when output. This is not the case for the PRESCRIBE printers (type BMON, PRES)! With these printers, the graphic is not automatically turned when landscape is used, but appears on the page in the identical position as for portrait. You are therefore recommended not to output raster images when printing in landscape on PRESCRIBE printers.
    PRESCRIBE printers do not support the resolutions 200 and 600 dots per inch when printing raster images.
    Not all PCL-5 compatible printers support the resolutions 200 and 600 dots per inch when printing raster images.
    TIFF graphics with compression type 2 ("CCITT Group 3 1-Dimensional Modified Huffman run length encoding ") can currently not be imported although this is a component of the Baseline TIFF 6.0 specification for monochrome images.
    Color TIFF graphics with full color representation (ie. a lot more than 256 colors) are automatically converted into 256 gray levels when uploading with type BCOL.
    When TIFF graphics are converted to black and white raster images (type BMON, PCL, POST, PRES) there is no default simulation of gray levels or colors of the original image on the printer (for example, by using different tones of gray). Each pixel of the original image is converted to a white or black pixel on the printer according to its intensity value.
    The parameter "Number of TIFF gray levels" does, however, allow a simulation of gray/colour tones of the original image through levels of gray on the printer, when using type PCL, POST or PRES. This parameter is ignored for type BMON.
    The conversion of TIFF graphics can be so time-consuming that it is recommendable to execute the report RSTXLDMC in batch processing. Note: in batch, the file is always read from the file system of the application server (ie. not from the file system of the GUI).
    The length of an individual text in the text file is limited. When importing TIFF graphics with very large dimensions, especially if more than 2 gray levels are used, a termination can therefore occur when saving the standard text ("EXPORT_TOO_MUCH_DATA"). This restriction can only be avoided by reducing the TIFF graphics. Note: The display of a raster image in Postscript or PRESCRIBE format needs from two to three times as much space as displaying in PCL-5.
    When processing very large TIFF images on PostScript printers, a print termination can occur with PS error message "limitcheck". In this case the internal memory of the printer is insufficient to scale the required raster image. This implementation limit cannot be influenced by changing the report parameters when importing.
    Requirement
    The file which is to be uploaded can contain the following formats/ commands:
    Baseline TIFF 6.0 raster image files. The image information of the TIFF file is converted into black and white/color raster images when uploading. Note: As the TIFF format allows a variety of variants, only a basic set of TIFF 6.0 formats is supported here described in the TIFF 6.0 specification as Baseline TIFF 6.0.
    PCL : PCL-5, Hewlett Packard Printer Control Language 5 for HP LaserJet 3, 4, 5 series and compatible printers. The data is output by the printer driver HPL2 only.
    PRES: Kyocera PRESCRIBE for Kyocera laser printers. The data is output by the printer driver PRES only.
    POST: Adobe PostScript or EPS format (encapsulated PostScript ) for PostScript printers. The data is output by the printer driver POST only. In the upload, one of the end-of-file markers (CTRL-D, hex $04) which may be contained in the PostScript file is not transferred.
    For PostScript files which contain a bounding box entry (for example, all EPS files) the macro/graphic can be scaled to a size specified by the user. In this case, a small lead text and trailer are generated by the report for the macro data and inserted in the standard text.
    Parameters of RSTXLDMC
    File name
    Path and file name of the file to be uploaded in the file system of the R/3 frontend (dialog processing) or in the file system of the application server (batch processing)
    Type
    Way which the data contained in the file is to be converted. Possible values are BMON, BCOL, PCL, POST and PRES. With parameter values BMON and BCOL, a TIFF 6.0 file is expected. This is converted into either a black and white raster image (BMON) or a color raster image (BCOL). These raster images are printer-independent and can be printed using various printer types (see above).
    With parameter values PCL, POST and PRES, either a TIFF 6.0 file or a file with printer commands in the appropriate printer langauge is expected. If the file is a TIFF file, it is converted into a black and white raster image for the printer type specified in the parameter. The presence of a TIFF file is recognized automatically. If the file is not a TIFF file, the file contents are regarded as the printer macro of the respective type. Data loaded with type PCL, POST or PRES can only be printed on the respective printer type.
    Resolution for TIFF raster images
    Resolution which should be used when importing a TIFF raster image, in dots per inch (dpi). If an allowed value is entered here, this overrides the resolution information in the TIFF file. The allowed values are:
    75 dpi
    100 dpi
    150 dpi
    200 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
    300 dpi
    600 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
    Changing the resolution affects the size of the graphic on the printer. If a resolution of 300 dpi is stated in the TIFF file and this parameter is set to 75 dpi, the graphic is four times as big when printed as at the outset.
    Note: Kyocera PRESCRIBE printers do not support 200 and 600 dpi resolutions.
    Note: Not all PCL-5 printers support resolutions 200 and 600 dpi, for example HP LaserJet 3 series does not, but LaserJet 4 and 5 series do.
    Graphic Resident on Printer
    Normally, graphics that occur more than once in a printing job (a company logo that appears on each page, for example) are sent to the printer repeatedly each time they are needed. In order to avoid this kind of redundancy, you can select this checkbox on the selection screen. The R/3 print driver then stores the graphic in the printer's memory and the printer retrieves the 'resident' graphic memory every time that re-occurs in your job.
    Caution: Whether or not the printer correctly reproduces the graphic depends on the amount of memory available in the printer during the printing job! You should avoid using this feature with color graphics since they take up a lot more memory than monochrome graphics.
    This parameter can only be used with types "BMON" and "BCOL".
    Absolute positioning
    Determines whether the macro/graphic is positioned absolutely or is to be output at the current text position. If this checkbox is selected, the graphic is positioned absolutely (parameters "X-position" and "Y-position" are used), if this checkbox is not selected, the graphic is positioned at the current text position (parameters "Reserved height" and "Shift to right" are used)
    Absolute X-position
    Horizontal position (space from left border) of the macro/graphic, if absolute positioning is required. This is the parameter XPOS of the HEX command.
    Absolute Y-position
    Vertical position (space from upper border) of the macro/graphic, if absolute positioning is required. This is the parameter YPOS of the HEX command.
    Reserve height automatically
    If this checkbox is selected, the system automatically inserts the actual height of the graphic during printing into the subsequent "Reserved height" parameter.
    Reserved height
    If positioned at the current text position, this parameter specifies the horizontal spacing to be reserved for the macro/graphic, which must not be printed with text from the paragraph. This is the parameter HEIGHT of the HEX command.
    Shift to right
    If positioned at the current text position, this parameter specifies the space between the left border of the macro/graphic and the left border of the page window. If this value is increased, the macro/graphic is shifted to the right. This is the parameter LEFT of the HEX command.
    Unit of measurement for positioning
    The unit of measurement in which the position values (X,Y, height, shift) are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
    Text title
    Comment used for the attribute "Title" of the standard text generated as well as as a comment line in the text itself
    Line width
    Number of columns to be used in the standard text when generating the HEX...ENDHEX command lines. The default value is 132
    Text name
    Name of the standard text to be generated. If an * character occurs in the name, it is replaced by the value of the parameter "Printer type". For example, if the entry is ZHEX-IMAGE1-* and the printer type = PCL, the text name ZHEX-IMAGE1-PCL is generated. The default value for the name is ZHEX-MACRO-<printer type>, but the standard text can be named as required (take into account customer reserve). Standard texts are client-dependent!
    Note: The name of a standard text can be up to 32 characters long !
    Text ID
    ID of the standard text to be generated. The default value is ST (general standard texts)
    Text language
    Language key of the standard text to be generated. The default value is the logon language
    PostScript scaling
    Flag which determines how the macros/graphics of type POST are handled. If set to 'X', the report expects a PostScript comment line in the file
    %%BoundingBox llx lly urx ury (e.g. %%BoundingBox -1.5 0 21.4 14.1)
    as present, for example, in all EPS files, in which the dimensions and the position of the macro/graphic are specified (if a bounding box comment is not included, 0 0 1 1 is assumed as the default value). This information is then used by the report to insert PostScript commands which scale the macro/graphic to the size specified in the parameters "Width" and "Height" (listed below).
    If the flag is set to ' ' (blank), the PostScript file is transferred to the standard text without any additions (any transformations to the coordinate system used by the printer driver must already be contained in the file).
    The flag must be set to 'X' for the import of TIFF files for type POST.
    Width according to PS scaling
    Required width of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
    Height according to PS scaling
    Required height of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
    If you want to scale the PostScript graphic with these parameters, one of the two values, width or height, can be specified with zero. The graphic is then scaled so that the width-to-height ratio remains unchanged and the original graphic is not distorted.
    Unit of measurement for PS scaling
    Unit of measurement in which the parameters "Width" and "Height" are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
    Number of TIFF gray levels
    Number of gray tones which are to be used on the printer for displaying the original image. Note: This parameter is only evaluated when using types PCL, POST or PRES!
    Possible values are 2,4,9. With the default value 2, each pixel of the original image is converted either to a white or a black pixel on the printer. With the value 4, each pixel of the original image is converted on the printer with 4 pixels, which simulate 4 different gray levels. With the value 9, each pixel of the original image is converted on the printer with 9 pixels which simulate 9 different gray levels.
    Note: With values 4 or 9 the resolution of the image is doubled or tripled. The restrictions on the possible resolutions (see previous parameter) then apply for the resulting resolution.
    Output
    Individual steps of the upload procedure are logged in the report list generated and, if necessary, errors reported. The uploading of TIFF graphics, in particular, is cancelled if there is a variant which is not supported. A message to this effect is then issued. If execution is successful, the report generates a standard text with the key specified in the parameters. If the standard text already exists, a window appears with a warning before the text is overwritten.
    Regards,
    Ameer Baba.

  • I have one problem and I think it is a settings issue. When I google the web I get results. Now, when I visit some website and I return to my search results I don't have any markers (diffrent link colour for visited sites in IE).

    Question
    I have one problem and I think it is a settings issue. When I google the web I get results. Now, I visited some website and then I want to return to my search results and pick another search result. And there is a problem: I don't have any markers (diffrent link colour for visited sites in IE) that would help me to distinguish visited and not visited sites.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • How do I prevent my document from looking like chinses when I use the pdf converter and print it?

    I print with the pdf converter. When I open the document its Chinese scribble, the whole document..

    Hi jhpjr,
    Are you converting a PDF to another format using ExportPDF, or converting a file to PDF? If you're using ExportPDF, the quality of the conversion depends on the quality of the original PDF file. Please see Will Adobe ExportPDF convert both text and form... | Adobe Community for an explanation of how ExportPDF converts files.
    If your PDF wasn't created from a scanned document, you may have better luck by disabling OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community
    Best,
    Sara

  • I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

    I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

    keokipineapples schrieb:
    I do have all of my files I am working on located on an external drive. I plan to transfer them directly to the hard drive
    Transfer them to your harddisk immediately.
    External drives are not offiially supported and the source of errors of all kinds including complete loss of files.
    Illustrator support for networks and removable media

  • I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard.  When I run the Snow Leo install it errors saying I need OS 10.5 to run the install.  How do I get around this?  I've read that it's possible to go direcectly from 10.4 to 10.6.

    I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard.  When I run the Snow Leo install it errors saying I need OS 10.5 to run the install.  How do I get around this?  I've read that it's possible to go direcectly from 10.4 to 10.6.

    To buy a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
    Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088

  • Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

    two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
    https://www.dropbox.com/home/iphone
    https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

    Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

  • Hello! I have a iPhone When I enter the SIM card lock is not working from Sweden and I'm in Iraq, how do you open it?? Thank you

    Hello! I have a iPhone When I enter the SIM card lock is not working from Sweden and I'm in Iraq, how do you open it?? Thank you

    Hussein AL-Saady wrote:
    I contact my relatives in Sweden have gone to Apple there
    Did we tell you to contact Apple?  No. 
    Do what we said and contact the wireless provider in Sweden to which the phone is locked to..

Maybe you are looking for