How do I select a item from a drop down list on a web in Safari On An. IPad 2. The list apears and disapears só QuickClips I cannot TAP anything On The list Quickly enough.
I tried to select an item from a drop down list on a web page in safari and discovered that the list disapeared to quickly for me to make a selection. Has anyone else found this and solved the problem. Many thanks.
Demo wrote:
I tried it on my iPad and I see what you mean. From what I can see when I go to the site on my Mac, it is Flash based and that will not work anyway.
Actually, it is Javascript and uses the 'onmouseover' event.
Similar Messages
-
Can you eliminate an item from a drop down menu after it is selected once so it isn't selected again
Can you eliminate an item from a drop down menu after it is selected once so it can't be selected again be someone else?
I am sorry but Formscentral doesn't support any type of dynamic form content updating.
Andrew -
How do you select individual items from within a group?
Hi, All.
New poster. Forgive me if I miss any forum etiquette.
Currently using Indesing CS6 on Mac Osx 10.7.4
I'm a relatively recent convert to Indesign from Quark, and one thing I seem to have continual problems with is selecting individual items from within a group.
For example I will have a grouped item, such as price marker that is comprised of several individual items, some text boxes, some rectangles.
I find there is no way to select a rectangle that is currently placed behind a transparent text box without ungrouping the entire item - which isn't really an option.
The select options (slect next item below etc. just don't work)
For any Quark users out there, the equivalent command I'm looking for is the cmd+opt+shift click through, which just worked absolutely perfectly.
I have scoured the internet and forums looking for an answer for this, as I assumed it must be my own lack of knowledge, but I can't find an answer.
Any help much appreciated.
ThanksHi, winterm.
Thanks for the super quick repsonse. Unfortunately that hasn't seemed to have helped me.
That works fine as long as the grouped items are overlapping or apart, but not when items are entirely behind another item (ie, no part protruding from the group)
The problem is that if I double click to try and get through a text box to an item that is entirely behind it, then it just switches into text edit mode for the top text box.
If it helps, could you imagine a transparent text box that is 20x20 with red rectangle centred beneath it that is 10x10. If the 2 items are grouped I cant find any way to select through to the red rectangle without first ungrouping the two.
Am I going mad? -
Select customer name from a drop down Select List or be able to type it in
Hi,
Is there a way to allow my users to have an option to either select a customer name from a drop down Select List or be able to type it in...
Thanks in advanceThis is an excellent option for another application but in this one I would prefer a drop down list to allow my users to see all the orders (to pick from the list) or type it in if they can't find it in the list...
I know how to create a drop down select list but not sure what to do to allow users to be able to manually type in as well...
Thanks -
How can I select an item from a list component with a seperate button
This is a repost, I decided it'd probably be better here than
in the general discussion board. I will try to delete the other
one.
Hello Everyone,
This is my first post here. I am trying to figure out how to
select an item within a list component with a button. This button
is calling a function. I have searched for the past 3 hours online
and I can't find anything about it. I thought perhaps I could set
the selectedItem parameter, but that is read only, and I believe it
returns an object reference rather than something like a number so
even if i could set it, it would be pointless. I also found a get
focus button, thought that may lead me somewhere, but I think that
is for setting which component has focus currently as far as typing
in and things like that. I am lost.
Basically I am looking for a way to type this
myList.setSelected(5); where 5 is the 5th item in the list.
Any help would be much appreciated.Never mind found it. It is the property called selectedIndex
and it is writable -
Hi,
I am displaying a list of filesfrom a directory in a table on the front panel of a VI as part of a program I am developing. I would like the user to be able to select from that table so that particular file can be processed. Is there a way to do this?
Thanks,
Aaronyou'll find that most of the useful functionality of the labview user control interface is hidden within the property node and invoke node functions. just right click a control or indicator terminal on the block diagram and mouse over to create, then to property node or invoke node. lots of fun stuff in there. attached is an example. one file is saved for labview 8.0, the other is saved for labview 8.6.
Message Edited by Root Canal on 10-16-2008 11:17 AM
global variables make robots angry
Attachments:
file selection table.vi 26 KB
file selection table lv 8.0.vi 42 KB
file selection table.PNG 18 KB -
How can I stop Firefox clicking when I select an option from a drop-down menu? It's bloody annoying.
When I select an option from the pull-down menus, or a link from right-clicking on the forward or back buttons, it makes a click sound. I'm using this on a machine that I use for recording and I don't want clicks on my soundtrack. How can I turn it off - I've looked through about:config and preferences but haven't seen any way to select or disable such a feature.
I'm using FF 8.0 on Ubuntu Studio.Hi,
It could be a Ubuntu Studio sound preference. You may have to turn off mouse click sound effects in the system.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins] -
How do I export items from my iPhone to my iMac? Apple sent me a message to my iPhone, saying that there is an update for iOS, to 6.1.3, but before I install this update, I should first transfer some items from the iPhone to my iMac; otherwise I would lose these items (apps?)
I have two problems with this: 1) I don't know what files I should transfer, and 2) I don't how to transfer from an iPhone to an iMac (but do know how to download apps from iTunes Store to my iMac, and then to my iPhone.
Very confusing! Any help/suggestions gratefully accepted.
DBHMove the cursor to the very top of the computer's screen, click on File, and choose Transfer Purchases. If you need to authorize the computer, the command is in the Store menu.
(79537) -
Show/hide fields when selecting an option from a drop-down menu.
Hello Gurus!
I have a question about creating a Java Script withing Acrobat pro. This is what i would like to do: I created a drop-down menu with several selection entries. Upon the customer making one of the selection entries, i would like for the correct fields that i created to become visible and all other fields to hide. Is this even possible to do? The reasoning behind this is because we have a form that customers have to generate in order to request access to certain financial accounts; we have over 20 different types of accounts and for each instance the customer has to fill out the same form. By creating a drop down menu, i can use the same form by just changing the drop-down selection and clicking on the designated fields for that selection. At this time i have over 20 different forms that poing to 20 different account requests and i would hate to send the form 20 different times to one person. The reason i can not add all fields desired for all accounts is due to the fact that the form would be filled with hundreds of checkmarks and instructions thus making the process too tideous for the customer. Hope you guys can help out.
~VaderThe good news is, it can be done (and it has been done).
There are a few things to be aware of, however.
The most important is that the form must be planned well, which means that you must think carefully about your logic and even more so about your field naming (hierarchical field names are your friend). One fundamental issue, you have to be aware of, is that this form no longer will be a "standard form". The consequence of this is that you may have to be aware that you might get into trouble when you have to prove that your user filled out that particular standard form (talk to your compliance and forms management people about that).
You also may have to decide whether the form should be usable in Reader. And, if so, how much you want to spend on the right to do so. You will see below why…
There are actually two approaches for dynamically showing/hiding parts of a form. If your form can be separated between a fixed first page (where you also have the account type selection), and a variable part (depending on the selection), you could use Templates, which you spawn according to the selection, and delete pages when you change the selection. This approach is very easy to implement, but requires Reader Extensions Server to allow it to work in Reader; Acrobat Pro's extended rights are not sufficient for that.
The other approach is showing/hiding fields. If you did your homework well, it would be very easy to first hide all subsequent fields, and then show the ones you need in two lines of code. This approach does not require extended rights for Reader at all, as long as your forms will always have the same number of pages, for each of your account types. This approach also works for the cases where the differences between the individual forms are very small. It does also work for showing/hiding bigger chunks of the form. In that case, you might create the "background" separately, and then put it as an icon into a button field which you will show/hide together with the carefully placed on top of it active fill-out fields.
There is a third possibility, which Adobe Propaganda probably would suggest, and that woudl be subforms in LiveCycle Designer. The consequence is, however, that you won't have PDF forms, but proprietary XFA forms instead. And you may have more developing and maintenance work than with the other approaches.
Back to your original question: you could use a Keystroke script evaluating event.changeEx of the combo box field. Depending on that, you would run your action to set up the according form part. The other way to do it would be evaluating event.value in the onBlur event. The latter would have the advantage that the selection has been made, and you get a bit more time to set up the form (this may in fact be an issue, particularly with Acrobat 9 and 10, which may take their time to show/hide fields).
Another possibility instead of a drop down (combo box field) would be a popup, where you would have a button to press, and the list of selections pops up. This second method uses app.popUpMenuEx().
Hope this can help.
Max Wyss. -
Selecting an item in a Drop Down Menu to activate a field
Hi,
I'm using LiveCycle Designer ES to create a dynamic form and I wish to have an 'other' field appear when 'other' has been selected in drop down menu. I've worked out how to give each of the drop down items a Specified Item Value and use this to trigger the presence of the 'other' field. However I'm not sure which event to use to activate the presence code.
Thanks in advance.You can write the code either in the change event of the dropdown or in the Exit event of the dropdown.
If you use the change event use the below syntax..
if(xfa.event.newText =="Other")
fieldName.presence = "visible";
If you are using the exit event use the below syntax..
if(this.rawValue =="Other")
fieldName.presence = "visible";
Sample file is at the below location..
https://acrobat.com/#d=QZS2WmRlvgjTIePj8a6mkQ
Thanks
Srini -
Hello Everyone,
I am in dire need of assistance I am hoping someone could provide. I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Any suggestions are welcome and appreciated.
Thank you for your time.You've a couple of issues .... when Disk Utility tells you it can't repair a drive, if the error is a soft error, like an invalid tree or node, Disk Warrior (or TechTool Pro) can handle it. However, if Disk Warrior (or TechTool Pro) can't handle it, you can erase and write zero's to the hard drive and restore to it, or you can buy a new hard drive. Sometimes running SMART Utility can provide additional insight into the health of the hard drive.
THe 4SNS error is a sensor error. You could install iStat Pro to see if something is indeed getting too hot or remaining room temp or less. You may need to take it into an Apple shop so they can use their thermal diagnostics to test and isolate it further. -
any suggestions?
I had this same problem, but it seems to have disappeared after I discovered that Bluetooth was on and turned it off (General menu in the Settings app).
-
How to set an Application Item from PL/SQL
I am attempting to set an Application Item
After login to my app, I want to retrieve a row from my SETTINGS table and populate some Application Items with the settings information so that I can
display some of that settings information on every page.
Just to start, I created one Application Item named F106_YEAR
I then created a Shared Components Application Process which executes on New Session: After Authentication
I created this process as an Anynomous PL/SQL block.
declare
aucyr varchar(4);
begin
select year into auctyr
from settings;
:F106_YEAR := aucyr;
end;
I've tried a couple of other Syntax tricks attempting to reference the Application Item F106_YEAR from within PL/SQL (like V('F106_YEAR') but nothing seems to be working.
I'm sure that I am missing something simple. Can someone tell me how to set an Application Item from PL/SQL?
Thanks in advance.I'm still doing something wrong because this is not working for me.
I've tried both of the following versions as an Application Process set to run on New Session after Authentication:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
:F106_AUCTION_YEAR:=auction_year;
end;
and I also tried:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
APEX_UTIL.SET_SESSION_STATE (p_name, p_value);
end;
F106_YEAR is a global Item (shared components).
The select statement works just fine in SQL*PLUS so I know that it is correct.
If I run the debugger and log into the application, here is the output. Shouldn't I see my Application Process get called if it is set to run on New Session after Validation?
My Application process is named RETRIEVE_AUCTION_SETTINGS
0.01: A C C E P T: Request="P101_PASSWORD"
0.01: Metadata: Fetch application definition and shortcuts
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Fetch session state from database
0.02: ...Check session 695371898690095 owner
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.02: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 101
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save "P101_USERNAME" - saving same value: "jps"
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: ...Process "Set Username Cookie": PLSQL (AFTER_SUBMIT) begin owa_util.mime_header('text/html', FALSE); owa_cookie.send( name=>'LOGIN_USERNAME_COOKIE', value=>lower(:P101_USERNAME)); exception when others then null; end;
0.04: ...Process "Login": PLSQL (AFTER_SUBMIT) wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => v('APP_SESSION'), P_FLOW_PAGE => :APP_ID||':1' );
0.06: ...Process "Clear Page(s) Cache": CLEAR_CACHE_FOR_PAGES (AFTER_SUBMIT) 101
0.06: Nulling cache for application "106" page: 101
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="695371898690095"
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2904114531488186
0.01: ...Session ID 695371898690095 can be used
0.01: ...Application session: 695371898690095, user=JPS
0.01: ...Determine if user "JPS" workspace "1040027630222986" can develop application "106" in workspace "1040027630222986"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.04: Computation point: BEFORE_BOX_BODY
0.04: Processing point: BEFORE_BOX_BODY
0.04: Region: Auction_Title F106_AUCTION_YEAR -
Selection from one Drop down populates a second drop down list
I have a form connected to a database. The database contains columns for project number, name, company name, address, etc.
The first drop down I would select a distinct project number, once selected I'd like the second drop down to contain a selection set of all the companies assigned to that distinct project number.
I'm assuming that this is possible?
Thanks,
ToddThanks Paul,
The 4th example in the Webinar is what we used to auto populate a users contact information when selecting their name from a drop down list. This name drop down has all the names in a particular table of the data base, we would like to filter that down by first selecting a project number from a drop down list which would cause the names to filter down to just those associated with the project number picked.
Is there scripting that can be done that can accomplish this? We can get a single name to show in the drop down but it doesn't seem to want to return a list. Any thoughts?
Thanks,
Todd -
How to select an item from dropdownbox
Hi all
I have two dropdownlistbox. When I select an item in the first box,according to the selection, I have to add items in the second dropdownlistbox. I want the implementation of the onClientSelect="javascript:Sample();" of the first dropdownbox "drop1" using
<script>
function Sample(){
//I want the implementation to be done here
</script>
in my jsp.
How do I additem to the second dropdownbox "drop2" inside the script tag?Please help me with this.
Thanks in advance
Regards
Harini SIf you want to populate the second box in the javascript, iam giving you a working sample that might get you started.
If you are playing with htmlb and want the second dropdown to be populated with values from database, then you shud pass the selected value to Dynpage and process it!
<b>SAMPLE Javascript for multiple dropdown boxes:</b>
<HEAD>
<script type="text/javascript">
var arrItems1 = new Array();
var arrItemsGrp1 = new Array();
arrItems1[3] = "Truck";
arrItemsGrp1[3] = 1;
arrItems1[4] = "Train";
arrItemsGrp1[4] = 1;
arrItems1[5] = "Car";
arrItemsGrp1[5] = 1;
arrItems1[6] = "Boat";
arrItemsGrp1[6] = 2;
arrItems1[7] = "Submarine";
arrItemsGrp1[7] = 2;
arrItems1[0] = "Planes";
arrItemsGrp1[0] = 3;
arrItems1[1] = "Ultralight";
arrItemsGrp1[1] = 3;
arrItems1[2] = "Glider";
arrItemsGrp1[2] = 3;
var arrItems2 = new Array();
var arrItemsGrp2 = new Array();
arrItems2[21] = "747";
arrItemsGrp2[21] = 0
arrItems2[22] = "Cessna";
arrItemsGrp2[22] = 0
arrItems2[31] = "Kolb Flyer";
arrItemsGrp2[31] = 1
arrItems2[34] = "Kitfox";
arrItemsGrp2[34] = 1
arrItems2[35] = "Schwietzer Glider";
arrItemsGrp2[35] = 2
arrItems2[99] = "Chevy Malibu";
arrItemsGrp2[99] = 5
arrItems2[100] = "Lincoln LS";
arrItemsGrp2[100] = 5
arrItems2[57] = "BMW Z3";
arrItemsGrp2[57] = 5
arrItems2[101] = "F-150";
arrItemsGrp2[101] = 3
arrItems2[102] = "Tahoe";
arrItemsGrp2[102] = 3
arrItems2[103] = "Freight Train";
arrItemsGrp2[103] = 4
arrItems2[104] = "Passenger Train";
arrItemsGrp2[104] = 4
arrItems2[105] = "Oil Tanker";
arrItemsGrp2[105] = 6
arrItems2[106] = "Fishing Boat";
arrItemsGrp2[106] = 6
arrItems2[200] = "Los Angelas Class";
arrItemsGrp2[200] = 7
arrItems2[201] = "Kilo Class";
arrItemsGrp2[201] = 7
arrItems2[203] = "Seawolf Class";
arrItemsGrp2[203] = 7
function selectChange(control, controlToPopulate, ItemArray, GroupArray) {
var myEle ;
var x ;
// Empty the second drop down box of any choices
for (var q=controlToPopulate.options.length;q>=0;q--) controlToPopulate.options[q]=null;
if (control.name == "firstChoice") {
// Empty the third drop down box of any choices
for (var q=form.thirdChoice.options.length;q>=0;q--) form.thirdChoice.options[q] = null;
// ADD Default Choice - in case there are no values
myEle = document.createElement("option") ;
myEle.value = 0 ;
myEle.text = "[SELECT]" ;
// controlToPopulate.add(myEle) ;
controlToPopulate.appendChild(myEle)
// Now loop through the array of individual items
// Any containing the same child id are added to
// the second dropdown box
for ( x = 0 ; x < ItemArray.length ; x++ ) {
if ( GroupArray[x] == control.value ) {
myEle = document.createElement("option") ;
//myEle.value = x ;
myEle.setAttribute('value',x);
// myEle.text = ItemArray[x] ;
var txt = document.createTextNode(ItemArray[x]);
myEle.appendChild(txt)
// controlToPopulate.add(myEle) ;
controlToPopulate.appendChild(myEle)
function selectChange(control, controlToPopulate, ItemArray, GroupArray) {
var myEle ;
var x ;
// Empty the second drop down box of any choices
for (var q=controlToPopulate.options.length;q>=0;q--) controlToPopulate.options[q]=null;
if (control.name == "firstChoice") {
// Empty the third drop down box of any choices
for (var q=form.thirdChoice.options.length;q>=0;q--) form.thirdChoice.options[q] = null;
// ADD Default Choice - in case there are no values
myEle=document.createElement("option");
theText=document.createTextNode("[SELECT]");
myEle.appendChild(theText);
myEle.setAttribute("value","0");
controlToPopulate.appendChild(myEle);
// Now loop through the array of individual items
// Any containing the same child id are added to
// the second dropdown box
for ( x = 0 ; x < ItemArray.length ; x++ ) {
if ( GroupArray[x] == control.value ) {
myEle = document.createElement("option") ;
//myEle.value = x ;
myEle.setAttribute("value",x);
// myEle.text = ItemArray[x] ;
var txt = document.createTextNode(ItemArray[x]);
myEle.appendChild(txt)
// controlToPopulate.add(myEle) ;
controlToPopulate.appendChild(myEle)
</script>
</HEAD>
<BODY>
<form name=form>
<table align="center">
<tr>
<td>
<select id="firstChoice" name="firstChoice" onchange="selectChange(this, form.secondChoice, arrItems1, arrItemsGrp1);">
<option value="0" selected>[SELECT]</option>
<option value="1">Land</option>
<option value="2">Sea</option>
<option value="3">Air</option>
</select>
</td><td>
<select id="secondChoice" name="secondChoice" onchange="selectChange(this, form.thirdChoice, arrItems2, arrItemsGrp2);">
</select>
<select id="thirdChoice" name="thirdChoice">
</select>
</td>
</tr>
</table>
</form>
Maybe you are looking for
-
The Adobe Acrobat Reader that is running cannot be used to view PDF files in a browser. Please exit Adobe Acrobat Reader and your web browser and try again. == This happened == A few times a week == Early this year
-
Connect macbook pro to HP laptop [Vista OS]
Hi All, I am really not all that clued up about things in networking, I was needing to transfer a few files from my macbook pro laptop to a HP laptop. I had hoped to use ethernet as I did not have a large enough flash drive. I connected the 2 laptops
-
Bookmarks toolbar shows only blank. Can not get any bookmarks to appear on the toolbar.
-
Blocking logistic invoice verification at company code level
Dear all, May I know what is the system setup (SPRO) for this: Blocking logistic invoice verification at company code level ? Thanks tuffy
-
How to flip a movie clip using actionscript
I have a movie clip on the stage facing one way (--->) how can I make it face the other way (<---) by flipping it over (not rotating it) using action script 3?