How do I select/deselect a midi controller when 2 are plugged in?

I am using Garageband rewired to Reason, and I'd like to record from both programs at the same time using 2 different keyboards. In Reason, I can go to the preferences and deselect one of the keyboards so it does not trigger, but there is no option I can find in Garageband to do the same to the other keyboard. Both keyboard still trigger Garageband, but only one triggers Reason. In the preferences it says there a 4 midi devices detected, but there is no drop down menu to select them. Anybody got any ideas?

Zircon_5 wrote:
there is no option I can find in Garageband to do the same to the other keyboard.
there is none, GB listens to all channels

Similar Messages

  • How do you pick a specific midi controller to record in Logic?

    How do I define a specific midi controller to use? I have been working with one controller for years (Yamaha Motif). I'm a guitarist and I just picked up a new midi guitar controller (Axon 50). When I boot up Logic with the Axon 50 turned on, Logic doesn't see midi note on and note off data. I have to open up the Axon 50 editor for the note on/off datat to come thru. Is there a place in Logic where I can actually tell it which midi controller to receive from? In Cubase 4 you can specify which controller to receive from on each track in the inspector. Where is this feature in Logic?

    Logic will listen to all MIDI data coming in from all ports, with the exception that if you have defined a Logic-supported control surface o a particular port, that port data will be intercepted by the control surface handling, and not routed to the sequencer.
    You can isolate individual ports in the environment by changing the routing of the Physical Input environment object, so check there is no routing handling on your physical input object.

  • In Mountain Lion how does OS select between ethernet and WiFi when both are activated??

    In Mountain Lion how does OS select between ethernet and WiFi when both are activated??  How does OS use "both" networl accesses??

    It will pick the highest service in the list which has an internet connection.
    To order the list, open Network System Preferences and select Set order of network services from the button below the service list.

  • Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on iTunes, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything, how can I stop this. please help!thx

    Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on Account, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything that is on my computer, how can I stop this. please help! please help!!!!!!thank you

    Is the iPod still singed into the account isn Settings>iTunes and App Stores and SettingsZ>iCloudl? If it is then I would not be concerned.
    Also see:
    iTunes Store: Associating a device or computer to your Apple ID
    since you may have started the 90 day window.
    For the other "problem", go to iTunes>Preferences>Devices and check the box that says Prevent iPod....automatically syncing.

  • On my Macbook Pro I am able to select colours for text. How do I select colours (like blue etc) when typing mail on my iPad Air 32GB wifi   cellular?

    How do I select different colour text on my iPad Air?

    You cannot change the color of text in Mail on an iOS device. You can only do Bold, Italics and Underline.

  • How can I prevent iPhoto from auto-launching when I plug in a card reader?

    When I plug in a card reader, iPhoto assumes that it is being summoned and auto-magically launches itself. I don't want this to happen. I don't want iPhoto to ever launch without my permission, which I might grant once a year or so. Yet, every day I have to cope with it launching multiple times as I attempt to transfer photos to my hard drive. It is a minor annoyance, true, but it is an annoyance.
    My question, then, is how can I make iPhoto stop doing this? I've searched its settings high-and-low, but to no avail. I've searched the System Preferences high-and-low, but to no avail. There must be something I'm missing.
    Help me, Apple Forums, you're my only hope!
    any Macintosh   Mac OS X (10.4.2)  

    Hi John,
    the next info is on using Image Capture to download the images. In the preferences though, you can choose to have nothing open when the camera is connected.
    Using Image Capture to download images and video clips:
    Open up Image Capture which is found in the Applications folder.
    When it is opened, go to Image Capture/Preferences
    Under the General button choose
    Camera: When a camera is connected, open Image Capture.
    The next time you connect your camera Image Capture will open.
    In the window that opens you will see an Options button. Click on that button to set your options.
    To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
    iPhoto: How to Change the "Open Automatically" Preference
    If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.
    Lori

  • How to avoid selection/deselection of TreeItem when changing expandedProp?

    Hello,
    i have an application that uses several TreeViews for Assets and Objects.
    These TreeViews are working with Groups and Subgroups, Sub-Subgroups, and so on ...
    My Problem is: Always when i toggle the expandedProperty of any Group, selected or not, it will change the selection in the TreeView.
    If the Group was selected, it will be deselected, if it was not selected, it will be selected, clearing any other selection.
    How can i prevent this?
    I tried eventFiltering and Handling of the mousePressed events without any success.
    Hopefully someone could help me?
    Thanks in Advance!
    Jewe

    Hello Krishnan,
    i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
    Do you know the particular object type to manage ?
    Hello Vishnu,
    same thing, whatever the option is (switch on / off standard) I have the transport popup.
    Anyway thanks for your try.

  • How do I select a sloft cover book when ordering an iphoto book?

    I have put together an iphot book. When I went to order it in print form, there was no place to select it as a soft cover book. How do I do this?

    That is because you select the theme and cover style when you first create the book - to change it select the book undr keepsakes and duplicate it (press the command key and "D") and then open the book and click on themes and select teh theme and teh new cover - carefully verify the obok in case text reflows or pictures move,
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    and order
    LN

  • How do I select several individual photo's which are separated by other pho

    I know this is simple but I haven't figured it out. I'm very new to apple and iPhoto.

    For non-contiguous selection: Hold the command key and click - this will add each item to the select as you click on it.
    For contiguous items: Click on the first, hold the shift and click on the last. All those in between will be selected.
    Regards
    TD

  • How do I disable iphoto from automatically launching when I plug in my iPhone?

    Trying to figure out how to disable iphoto from automatically launching on my Macbook Pro every time I plug in my iphone via USB cable. Tried looking at preferences in iphoto and itunes, but can't seem to find anything. Thanks!

    It is your preference in iphoto.
    Set it not to open when a digital camera is connected.

  • HT1937 in general setting for itunes wifi sync some how i got two folder first one the one i want :apps,movie, music, and tones some how i got second one is photo only, when i plug in it's only sync on 2nd one and not first one, i tried delete ituns and d

    i had problem for my itunes wifi sync, in general setting itunes wifi sync, i got 2 folder name 1st one is one i want sync for app, movie,music and tones, somehow i got second one folder i dont want is photos only when plug into it only sync for photo the rest are gone on itunes screen and not sync, please help me how can i delete second one folder? i tried click on first one not moved and syns only sync on second one folder
    thanks. i did try delete itunes and download back but still there, i tried restore iphone to itunes a few months back but itunes screen still on new second folder not the first one
    mjphu
    [email protected]

    I own the movies and I want them to stay in my iTunes library basically forever.
    But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
    iTunes prefs > Store > Show iTunes in the Cloud purchases.
    This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
    Also see this , -> Download past purchases
    and techncially, you don't "own" the movie, You simply have a license to use it.
    Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
    Actually, no it does not tell you that.
    FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
    Suggestions here -> http://www.apple.com/feedback/

  • How can I stop it from automatically syncing when I plug my iPod in?

    Is there any way to stop iTunes from popping up and syncing my iPod when I plug it in? I have about 1000 songs that are misplaced and I do NOT want them all erased off of my iPod when I plug it in. Yet, all the ways that are explained mean that you have to plug your iPod into the computer and have iTunes open and sync it just so you can click the box telling it not to sync. ANY way around this? Please help.

    Open the iTunes preferences and turn that option off, or press the Shift and Control keys while connecting the iPod to your computer, releasing them once the iPod appears.
    (27722)

  • How do I stop iTunes from coming up when I plug in the iPhone

    I don't always want iTunes to come up, only for syncing, when I plug in my iPhone or iPad. I most often just download photos using Image Capture and don't need iTunes for that.
    I see nothing in iTunes preferences (where it should be you would think) about disabling iTunes from starting up when  you plug in the iPhone.

    I'm being careful to rely on help with this as I have in the past 'done what is logical' and wound up destroying files and in a pickle. So I ask this one other related questions then:
    If I want to back up to computer then the 'automatically backs up to this computer' really means nothing as the message across from it says it has never been backed up before even though it automatically syncs then?
    This is very thin ice. I think I do remember in older versions of iTunes a checkbox like the one you mentioned first, but now it is gone.
    Whew. I'm sweating out what to do next.

  • How do I get Lightroom to open automatically when I plug my camera in

    I'd like Lightroom to open automatically when I plug my dslr into the computer. Is this possible?

    Go to:
    Edit >> Preferences>> General (tab)
    Lightroom >> Preferences>> General (tab) on Mac OSX
    Check the box: Show import dialog when memory card detected.

  • How to make a functions that gets called when the plug in is loaded?

    I'm making an automate plugin, and I want to make a functiosn that gets called when Photoshop loads my plugin. It doen't matter if my plug is never called fro the File->Automate menu. Is there any way to do this? Thank you.
    Daniel

    Hi There,
    I don't believe there is a way to handle this currently within App-V...Other virtualization products do have the ability to exclude processes and force to run outside or the bubble or exclude them from terminating on shutdown.
    It would be a great feature request for a future release. You can easily request it here:
    http://appv.uservoice.com/forums/280448-microsoft-application-virtualization
    PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
    rorymon.com Twitter: @Rorymon

Maybe you are looking for