How do I select notes in a given velocity range and fix them to a new value

Hello. How do I select notes in a given velocity range and fix them to a new value? I believe you can do this with the Transform window, but I can't figure it out. I can select ALL the notes and fix them to a value. But I want to select the notes within a range (and there are many) and fix them to a new value. Thanks for your help.

The transform window will also select, as well as operate.
Select Notes = Velocity within 20 > 40 (or whatever) and click Select only.
You've just selected all notes within that velocity range. You can now use different transform criteria to "Operate" only on that selection, or use the other editors with those notes selected.
For more on transform:
http://logicquicktips.blogspot.com/2006/10/transforminating-part-1.html
http://logicquicktips.blogspot.com/2006/10/transforminating-part-2.html
http://logicquicktips.blogspot.com/2006/10/transforminating-part-2a.html
http://logicquicktips.blogspot.com/2006/10/transforminating-part-3.html

Similar Messages

  • Ok I can't seem to get my apps,music, or photos from my iCloud from when I first setup iCloud on a iPhone 4. How do I get my things back from the iCloud and get them to my new device?

    Ok I can't seem to get my apps,music, or photos from my iCloud from when I first setup iCloud on a iPhone 4. How do I get my things back from the iCloud and get them to my new device?

    If you no longer have the phone or have any Backup of it at all, you can re-download your apps and your content from the iTunes Store by logging into your Apple ID at settings> iTunes & App Store. Unfortunately you can no longer recover the data that was associated with those apps.
    So far as your photos go, you can recover any photos that were in photo stream and taken less than 30 days ago by logging in with your Apple ID to settings> iCloud> photos. Unfortunately you will be unable to recover any photos from your camera roll.

  • I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

    I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

    Mail window may be in the Full Screen mode.
    Move the mouse pointer to the top right corner of the Mail window and hold it there.
    Menu bar should drop down and click the blue double arrow icon.
    Full Screen toggle shortcut:  control + command + F

  • HT203167 My computer died.  How do I recover all of my itunes store purchases and install them on my new computer?

    My old computer died.  How do I recover all of my itunes store purchases and install them on my new computer?

    Restore them from your backup, or use these instructions to redownload them through the iCloud.
    (73336)

  • How can I select 5-star photos in one catalog and use them to create a new catalog

    I've been using Lightroom since LR1. I now have several LR 5.5 catalogs generally organized by year and camera. I want to create a new catalog which will contain my best from each catalog. BUT, I don't want to remove the photos from their "home" catalog. The photos will continue to reside in both their original catalog and in the new "Portfolio" catalog. The easiest way to approach this is to filter photos in catalog "A" by rating, select all 5-star photos and create a new catalog containing just the selection. I don't want to export or remove them from their catalog or move them on disk. I want them to appear in BOTH catalogs. Since Lightroom is built on a database that merely points to image files, it seems like this should be possible.
    I realize I can create an empty catalog and select File->Import from Another Catalog... , then locate the photos one at a time by name and location clicking the import checkbox - tedious is an understatement when you have several 10's of thousands of photos.
    Any ideas?

    jimfeet wrote:
    Yes, that's an option I've considered. But as with any database, size is inversely proportional to speed - larger database equals slower performance. LR 5 is much better than earlier versions in this regard but when you reach 100,000 images you can feel it.
    This is incorrect. I accept that you think the database is getting slower, but the database (and really all databases) are designed to work pretty much the same regardless of the number of records, except for perhaps searching through the entire catalog. We have seen in this forum people who are now editing larger RAW files than a few years ago, they see it is slower, and decide it is the size of the database, rather than the size of their photos.
    What aspects of Lightroom are slow? If it's scrolling and displaying the previews and searching, then it might be the database. If its displaying images in the Develop module, it is NOT the database at all.
    Have you taken steps to improve the performance of the database, such as Optimizing it regularly? have you tried these performance tips: FAQ: Experiencing Performance related problems in Lightroom?

  • How do I use For loop to check each node and import them to a new document?

    In my function I would like to use a For loop to get all the statutes (xml) inside the object
    objXmlBcaResponseDoc. In my case there are 2 statutes. I would like the output to look like the one I have posted here below. I am not sure how to do the For loop. The commented For loop is from another function but it is not working inside
    this function.
    The output is added into the **objXmlResponseMessageDoc** object and should look like this with 2 statutes (ns1:Statute) and a totalCount=2
    <BasicSearchQueryResponse xmlns="http://crimnet.state.mn.us/mnjustice/statute/service/4.0">
    <StatutesXml>
    <Statutes runType="Request" runDateTime="2015-03-17T10:23:04" totalCount="2">
    <ns1:Statute xmlns:ns1="http://crimnet.state.mn.us/mnjustice/statute/messages/4.0">
    <StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">8471</StatuteId>
    <Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">60</Chapter>
    <Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">55</Section>
    <Subdivision xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
    </ns1:Statute>
    <ns1:Statute>
    <StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">9722</StatuteId>
    <Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">90</Chapter>
    <Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">25</Section>
    <Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
    </ns1:Statute>
    </Statutes>
    </StatutesXml>
    </BasicSearchQueryResponse>
    My xml doc is found inside objXmlBcaResponseDoc Here is xml inside
    objXmlBcaResponseDoc object
    <BasicSearchQueryResponse xmlns="http://crimnet.state.mn.us/mnjustice/statute/service/4.0">
    <ns1:Statutes xmlns:ns1="http://crimnet.state.mn.us/mnjustice/statute/messages/4.0">
    <ns1:Statute>
    <StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">8471</StatuteId>
    <Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">60</Chapter>
    <Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">55</Section>
    <Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
    </ns1:Statute>
    <ns1:Statute>
    <StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">9722</StatuteId>
    <Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">90</Chapter>
    <Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">25</Section>
    <Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
    </ns1:Statute>
    </BasicSearchQueryResponse>
    Here is my function
    Function GetStatutesByChapter(ByVal aobjXmlGetStatuteRequestNode As XmlNode, ByVal aobjXMLNameSpaceManager As XmlNamespaceManager, ByVal aobjBroker As ServiceCatalog.Library.v4.Broker) As XmlDocument
    Dim objXmlRequestMessageDoc As XmlDocument
    Dim objXmlResponseMessageDoc As XmlDocument
    Dim intCount As Integer
    aobjBroker.PostMessageWarehouseInformationalMessage("Chapter found.", 1)
    objXmlResponseMessageDoc = New XmlDocument
    'Add the first element into the document GetStatuteByChapter with its namespace
    objXmlResponseMessageDoc.AppendChild(objXmlResponseMessageDoc.CreateElement("BasicSearchQueryResponse", "http://crimnet.state.mn.us/mnjustice/statute/service/4.0"))
    'Build the initial response document
    objXmlResponseMessageDoc = New XmlDocument
    'Add the first element into the document GetStatutesResponse with its namespace
    objXmlResponseMessageDoc.AppendChild(objXmlResponseMessageDoc.CreateElement("GetStatutesResponse", "http://www.courts.state.mn.us/StatuteService/1.0"))
    'Add a child node to the GetStatutesResponse node
    objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.CreateElement("StatutesXml", "http://www.courts.state.mn.us/StatuteService/1.0"))
    objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.CreateElement("Statutes", "http://www.courts.state.mn.us/StatuteService/1.0"))
    'Convert the node Statutes into an element and set the runType attribute (runType="Request") by adding it's value Request
    CType(objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("runType", "Request")
    'Convert the node Statutes into an element and set the attribute (runDateTime="2015-03-05T10:29:40") by adding it
    CType(objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("runDateTime", Format(Now, "yyyy-MM-ddTHH:mm:ss"))
    'Create the BCA request message
    objXmlRequestMessageDoc = New XmlDocument
    objXmlRequestMessageDoc.AppendChild(objXmlRequestMessageDoc.CreateElement("ns:BasicSearchQueryRequest", aobjXMLNameSpaceManager.LookupNamespace("ns")))
    objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns1:BasicSearchCriteria", aobjXMLNameSpaceManager.LookupNamespace("ns1")))
    objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Chapter", aobjXMLNameSpaceManager.LookupNamespace("st")))
    objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Section", aobjXMLNameSpaceManager.LookupNamespace("st")))
    objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Subdivision", aobjXMLNameSpaceManager.LookupNamespace("st")))
    'Uncomment last working section below
    objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Chapter", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Chapter", aobjXMLNameSpaceManager).InnerText
    'check if there is a section and or subdivision if it is there then set the value
    If Not (aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Section", aobjXMLNameSpaceManager) Is Nothing) Then
    objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Section", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Section", aobjXMLNameSpaceManager).InnerText
    End If
    If Not (aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Subdivision", aobjXMLNameSpaceManager) Is Nothing) Then
    objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Subdivision", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Subdivision", aobjXMLNameSpaceManager).InnerText
    End If
    'check if there is a section and or subdivision if it is there then set the value
    aobjBroker.PostMessageWarehouseSnapshot(objXmlRequestMessageDoc.OuterXml, "Request Message", 1)
    'Call the BCA service
    intCount = 0
    'This is where I want to use a For loop to check for the statutes found using the Chapter
    'Loop through each Id
    'For Each objXmlStatuteIdNode In aobjXmlGetStatuteRequestNode.SelectNodes("ss:Statute/ss:StatuteId/ss:Id[string-length(.)>0]", aobjXMLNameSpaceManager)
    'Create the BCA request message
    'objXmlRequestMessageDoc = New XmlDocument
    'objXmlRequestMessageDoc.AppendChild(objXmlRequestMessageDoc.CreateElement("ns:SingleStatuteRequest", aobjXMLNameSpaceManager.LookupNamespace("ns")))
    'objXmlRequestMessageDoc.SelectSingleNode("ns:SingleStatuteRequest", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns:statuteId", aobjXMLNameSpaceManager.LookupNamespace("ns")))
    'objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns:statuteId", aobjXMLNameSpaceManager).InnerText = objXmlStatuteIdNode.InnerText aobjBroker.PostMessageWarehouseSnapshot(objXmlRequestMessageDoc.OuterXml, "Request Message", 1)
    'intCount = intCount + 1
    'objXmlBcaResponseDoc = New XmlDocument
    'File name is BCASearchQueryResponse.xml
    'objXmlBcaResponseDoc.Load("\\j00000swebint\mscapps\deve\appfiles\temp\BCASearchQueryResponse.xml")
    'objXmlResponseMessageDoc.DocumentElement.SelectSingleNode("ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.ImportNode(objXmlBcaResponseDoc.DocumentElement.SelectSingleNode("ns1:Statute", aobjXMLNameSpaceManager), True))
    'Next
    'Count how many Statute nodes found
    CType(objXmlResponseMessageDoc.SelectSingleNode("ss:BasicSearchQueryResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("totalCount", CStr(intCount))
    Return objXmlResponseMessageDoc
    End Function

    What is XPath and what does it do that you're impressed with?
    Yes, I see your link, but give me the abbreviated elevator speech on what it is please. It has me curious.
    http://searchsoa.techtarget.com/definition/XPath
    http://www.techrepublic.com/article/easily-navigate-xml-with-vbnet-and-xpath/
    http://www.techrepublic.com/article/using-xpath-string-functions-in-xslt-templates/
    The way that all this is being used by me now on a project is the HTML controls on the screen are built by XML not only about what the controls are and their attributes,   but the data from from the database is XML too with both going through transfermations
    vis XSLT as the HTML controls are built dynamically by XML data for the controls and the XML database data with decision being made in the transfermation on the fly.
    There are many usages with Xpath not just this one I am talking about with Xpath. You can do the same kind of thing with XAML and WPF forms as they are dynamically built. But it goes well beyond what I am talking about and the usage of Xpath. Xpath 3.0
    is the latest version. 
    http://www.balisage.net/Proceedings/vol10/html/Novatchev01/BalisageVol10-Novatchev01.html
    Thanks - I'll look into that at some point.
    Still lost in code, just at a little higher level.

  • I got a new iphone and i restored it from my old one but I'm missing a ton of photos. How can I download the photos from my old phone and get them to my new one?

    Help please!

    Restore it thru iTunes. At the prompt about using a backup, choose the other option to set up as a new iPhone.
    Or, go to Settings/ General/ Reset/ Erase All Content and Settings, then don't select a backup.

  • How do I take music from my itunes on my iPhone 4s that I did not purchase and put them on my new computer without deleting anything

    How do I take music from my itunes on my iPhone 4s that i didnt purchase and transfer them to my new itunes without deleting anything. I do not have my old computer and do not want to delete all my music on my phone. I do have some music i did purchase and transfered it but that music i didnt purchase, i dont know how to transfer. HELP!!!!!!

    Music is designed to sync in one way only, and that is from iTunes to the phone. There is the expectation that you would backup the computer to save this data. There are 3rd party solutions to try and recover music from the phone to put back into a blank iTunes library.
    See this user generated tip for help https://discussions.apple.com/docs/DOC-3141

  • How do I select multiple files under "Get File Info"and lock or unlock all?

    How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

    Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • I have photos on my iphone 4 that i'm trying to transfer to iphoto.  The problem is when I plug the phone in, it only wants to transfer the new photos, not all.  How can I take all the photos off my phone and put them into iphoto?

    I have photos on my iphone 4 that i'm trying to transfer to iphoto.  The problem is when I plug the phone in, it only wants to transfer the new photos, not all.  How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto.  Thanks

    To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

  • HT201269 my I-touch could not be restored. I had purchased Songs from the I-tune store but now don't have access to them. I purchased them. How can I retrieve them and put them on my new I=touch?? Any help with that will be greatly appreciated.

    My I-touch could NOT be restored. I had purchased songs from the I-tune store and they were on the "old" i-touch. I cannot access the tunes from the "old" device. How can I get "retrieve" the songs I purchased and put them on my NEW I-touch?? Please help!
    I could purchase the songs again. But I really don't want to spend more money. Help?

    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1338 I am a new user...how can I permanently (not have to go to view and zoom every time I go to a new page) increase type size

    I am a new user...how can I permanently (not have to go to view and zoom every time I go to a new page) increase type size

    In the System Preferences, you can change the display resolution.
     Cheers, Tom

  • HT4623 how do I get my pictures off my computer and copy them on my new ipad. Not a computer genius here

    How do I get my pictures from my Computer and copy them to my new iPad?

    Hi EJJ111,
    When you hook your iPad to your Computer, you will see it listed under Devices. Click on it, and then you will see a window to the right that shows all of your Device Profile pages. You will see a tab for Photos. Click on that tab. There you should see the option to sync all photos, or selected, events, photos, albums, etc.
    Select what you want sync'd and then sync the device. The photos you have selected will download to your device.
    Cheers,
    GB

  • How to break a long project in 3 smaller timelines and assembling them back

    Hi,
    I'm presently working on a big project (a 90 min long documentary). I took advantage of tips from other user to speed up FCPX but now I'm at a point where I fell in need of a radical switch to give breath to my mac (btw I just switched to a new iMac with 16gb of Ram)
    I've been wondering about an advice which was gave me from Russ H on this forum: I'm presently at minute 60, he suggested me to create another timeline for the last 30 min.
    I think I have to go further ahed, I need to break the exisiting timeline in two, so to have two 30min long TL. And then I have to create a third TL with the last 30 min.
    Here we go with my questions: 1) to have new timelines I need to create/duplicate projects? Or I can just associate more timelines to the same one?
    2) If not I think I have to duplicate my project three time and then cutting the 30'min segment which I don't need to be in that project...and then of course I have to start building my third edit in the third 30min TL
    3) Here is the point which make me worried the most...At the end of my work how can I put everything back togheter? Is there any "merge TL" function? I should just export 3 masterfile and then assemble them? I should just put the 3 file on XDCAM disc as clip to be playied in a row?
    Thank you in advance for your help,
    Nico

    As I recall, the suggestion to create separate projects was one of several to address increasingly sluggish performance as your project grew in length. The idea was that by opening and working on shorter timelines, you would place less of a processing burden on your machine.
    Now that you have a newer, more powerful  iMac, it may not be necessary to break up that project.
    If you still think it is desirable to break up the project, I would stay within the existing library and create a new project for the last part of the doc.  If you are still working on the first 60 minutes section and you want to work in smaller projects, create two more empty projects. Then select two sections of the original and paste them to the new projects' timelines. When you have finished all three sections, create a fourth project and paste copies of the three into it.
    There is no merge timeline command, but copy paste is pretty bullet proof. Click in the timeline window to make it active. Hit Command-A to select all; Command -C to copy, Open the empty project and hit Command-V to copy. Just make sure that your playhead is at the last frame of the sequence before you paste any more sections into the "omnibus" timeline and it should go quite smoothly.
    Russ

  • I am making a reel. How do I take clips from past DVDs Ive made and place them into Final Cut 4.0?

    Anyone answering,
    I am making a reel to show businesses what kind of work I can do. I am trying to take clips from past projects I have finished and place those clips in FCXpress 4.0. How do I go about doing this? Any advice on how I can do this will be a tremendous help for me.
    Thank you for your time!!

    Hi Jeremy,
    You will have to convert the DVD video to QuickTime using either Apple DV or Apple Intermediate Codec.
    Most people in this forum seem to use MPEG Streamclip to do this.  I have used it a lot it and it works great.
    Note that in addition to MPEG Streamclip (which is free), you will need the QuickTime MPEG2 Playback Component if you do not already have it on your Mac.  It is available from the Apple Online Store for $19.  This needs to be on your Mac in order for MPEG Streamclip to be able to convert the MPEG2 video that is on your DVDs.
    If it were me, and the video is standard 4:3 aspect ratio, I would probably convert it to QuickTime/DV; if widescreen 16:9  then I would probably convert it to QuickTime/Apple Intermediate Codec instead.
    After converting the video, select  an appropriate FCE Easy Setup to match how you converted the video in MPEG Streamclip.  Then import the converted file(s) and edit them into a new sequence.

Maybe you are looking for