How do I select the Poster Frame when exporting to video?

PP CS6
I cannot find how to select the frame that I want to appear as the Poster Frame in the exported video.
I can select it I can change one by right clicking an imported video OK but not the sequence!
I've been through every menu I can find & even Lynda.com training!
I'm sure that there must be a way but I'm blowed if I can find it!!

There are two common meanings for the phrase "poster frame":
A standalone image on disk (JPG etc) which is displayed by a player before the video is loaded - commonly used by video player apps on websites (YouTube etc), InDesign and PDF files, etc. so the video asset doesn't have to be opened in order for the viewer to see what they're about to watch - although the image is normally captured from the video it doesn't have to be.
An image resource embedded into the XMP/ID3 data of a video or audio file which can sometimes be shown in the player, but is normally set because it appears as the thumbnail image when viewing the files in Finder or Windows Explorer. It's not part of the content stream, it's in the file header. In MP3 files it's used to store album artwork.
You can create standalone JPEG images from PP using the camera icon below the monitor and can semi-automate the export of a still image alongside your video using presets in Adobe Media Encoder, but there's no option in PP (or via Adobe Media Encoder) to specify the embedded poster image in a rendered media file. Several third-party apps can do it, either during render (Compressor / Squeeze) or after the fact (Quicktime Pro), but support for these embedded resources depends on the wrapper for the video file.
The ability to set a 'poster frame' in the clip bins in PP is solely there to help you organize your project assets visually - for example if the imported footage starts from black, or if you want to choose a frame where the slate is visible - but your choice has no effect on the sequences at export and isn't written back into the original footage.

Similar Messages

How do I select the entire text when the focus is moved to one TextBox?

How do I select the entire text when the focus is moved to one TextBox?
There are three TextBoxes. I use <TextBox TabIndex="1"/> to set the order they are selected. When I enter one specific TextBox, I would like to have the entire text selected ... one key stroke removes all of the text in that TextBox.
bhs67

I do it the following way:
1. Override the OnStartup for the application. Use the following code: (VB.NET)
EventManager.RegisterClassHandler(GetType(TextBox), TextBox.GotFocusEvent, New RoutedEventHandler(AddressOf TextBox_GotFocus))
2. In the event handler use this code (again VB.NET)
Private Sub TextBox_GotFocus(ByVal sender As Object, ByVal e As RoutedEventArgs)
_theTextBox = CType(sender, TextBox)
If setFocusTimer IsNot Nothing Then
RemoveHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
End If
setFocusTimer = New DispatcherTimer
setFocusTimer.Interval = TimeSpan.FromMilliseconds(10)
AddHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
setFocusTimer.Start()
End Sub
Private Sub setFocusTimer_Tick(ByVal sender As Object, ByVal e As System.EventArgs)
setFocusTimer.Stop()
_theTextBox.SelectAll()
End Sub
What this does is register a handler for every textbox in your application. This will execute when the GotFocus event is raised and will allow you to do whatever (in this case select all) you want. A great way of handling things at the application
level.
Lloyd Sheen

How do you set the Poster Frame to display on a webpage with Quicktime Pro?

This is how the embed code is installed in HTML on my webpage. The Poster Frame image will not display when browsing the website in iPhone nor will the image display on the cached 8 image browser window in Google Chrome internet browser. Is there a way to include the poster frame or JPEG image in the embed code?
embed -- start
width="853" height="496" src="htp://example.com/mymovie-Desktop.m4v"
pluginspage="http://www.apple.com/quicktime/download/" type="video/quicktime"
embed -- end
Message was edited by: pasokon108

Mark, there's a very basic .NET method on every nullable object:
GetValueOrDefault
EDIT: Now I see...please avoid duplicating
questions...
To be clear:
Put GetValueOrDefault on every nullable field used inside your 'TotalDue_Compute' sub
You don't need to define 'TotalDue' as Nullable anymore

IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
How can a see the full screen when watching youtube. Address bar is always in view.
Maps are foggy and some images overlap to eachother.
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis

Luis757 wrote:
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis
No, there is no legitimate way to downgrade iOS to an earlier version.
Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
You can leave feedback here: Apple Feedback.

How do I keep the date/time when exporting photos?

When exporting photos from Photos.app on my Mac, it doesn't use the metadata that it displays in Photos--it uses the current date/time. So when I export a photo from 2010, it says it's dated 2015 when I import it into Aperture.
Is there a way to export an image with its original timestamp? Is this a bug? Thanks.

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it. This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif. It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing. If it's started as 16, no worries!
check if you are saving with compression. Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

How do I keep the original size when exporting?

I have people sending me photos to edit. I work a little in photoshop cs4 and then back in lightroom 3, but when I go to send them the photos back ,they are HUGE! How can I send them the same size file they sent me? (the ones I am currently working on are tiff. files.)

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it. This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif. It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing. If it's started as 16, no worries!
check if you are saving with compression. Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

How do I hide the mask layer when exporting as animated GIF ?

Hi,
I have designed the following logo for my football team's website.
It plays fine as a flash file but when I export it as an animated GIF file, it shows the bright pink mask layer. Obviously I don't want it to. Has anybody an idea of how to rectify this problem ?
Thanks,
Phil

Peter,
Success! I finally got my head round it Indeed, I can see now your point about the export method being preferable, it's also much quicker than my old "print PDF" method! Like I say, publishing isn't my area of expertise and I get comfortable and set in my ways with certain ways of doing things, especially with computers!
Bob,
Like I was saying to Peter, that makes sense now. I guess my not appreciating the process of PDF creation and thus my incorrect use of the terminology may have confused the issue. With regards the link you sent me, wow it certainly seems I'm not the only one who gets confused! Fortunately it seems my problem is now solved and I have learned to produce a better product!
Thanks again guys!
....now I wonder how I can make my dissertation interactive....

How do you remove the number sequence when exporting layer comps to files? CS6. Windows 8.

Hi
I remember in CS5 there was a script you could change, but I can't remember what it was called or where it was saved. Can anyone help please?
I would like to stop Photoshop automatically adding a number prefix to exported layer comps.
Thanks

So I've found a bit in the script that I think might be it (below). Can I remove that whole bit? Or would changing the 4 to a 0 do the trick (I tried and it didn't do anything)... Sorry, but I'm not a coder so don't really know if I'm barking up the wrong tree or not.
Thanks
for ( compsIndex = 0; compsIndex < compsCount; compsIndex++ ) {
                var compRef = docRef.layerComps[ compsIndex ];
                if (exportInfo.selectionOnly && !compRef.selected) continue; // selected only
                compRef.apply();
                var duppedDocument = app.activeDocument.duplicate();
                var fileNameBody = exportInfo.fileNamePrefix;
                fileNameBody += "_" + zeroSuppress(compsIndex, 4);
                fileNameBody += "_" + compRef.name;
                if (null != compRef.comment)    fileNameBody += "_" + compRef.comment;
                fileNameBody = fileNameBody.replace(/[:\/\\*\?\"\<\>\|\\\r\\\n]/g, "_"); // '/\:*?"<>|\r\n' -> '_'
                if (fileNameBody.length > 120) fileNameBody = fileNameBody.substring(0,120);
                saveFile(duppedDocument, fileNameBody, exportInfo);
                duppedDocument.close(SaveOptions.DONOTSAVECHANGES);

HT201177 How can I resolve the HDCP issues when playing 1080p video via HDMI to my HDTV?

Palying back any video (iTunes 1080p purchase, Netflix) via the HDMI port results in screen issues on my HDTV. FLickering, odd noises, etc. I did get a HDCP warning but my TV is HDCP compliant. Any ideas? Thanks.

Shivneet wrote: ... I would like the display for the MacBook to be turned off so I can see video only on my TV. ... Is there any way to achieve this?
Not that I could find.
The easiest workaround that I could find is a trimmed piece of Black Construction Paper taped over the Mac's display.
Alternatively, you could use an external Mac Compatible Web Cameras and then close the lid, but that is a higher cost option.
Message was edited by: EZ Jim
Mac OSX 10.8.4

How to access the Text Frame, when we use scrollable frame,

Hi Friends,
How to access the Text Frame, when we use scrollable frame,
Thank you,
[ Nav ]

That's the same question:
how can I access something (a page item) on a page…
Answer: you need something unique in that object you can get a handle on.
Or you use the selection a user of your script is doing and work with that selection…
A "scrollable frame" is nothing special. What it makes it a "scrollable frame" is the DPS software.
So you have to look for attached labels on the object, that identify the object for the PDS plug-in "Overlay Creator" as a "scrollable frame". That's possible with the "extractLabel("KeyString")" function. But you need to know the appropriate key-string in advance.
In another of your thread in the DPS forum, I basically answered the question how to obtain those key-strings.
When knowing the key-string you could loop through all your page items (you can skip all text frames) in the allPageItems-collection, to identify the "scrollable frame" by extracting the right label.
If you have more than one "scollable frames" you need a second unique identifier for the particular object.
That could be nearly any property.
Keep in mind, there is no "scrollableFrames" collection in the DOM !
Uwe

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.

Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.

How can i select the next column instead of next row when press enter key

I need to know how can i select the next column instead of next row when i press the enter key.By default ,when i press enter key the next row is selected and the column remain unchanged but I wants opposite that is the row should remain unchanged but column index will changed.
Thanks to all.

Well, the right arrow key will already move you to the next column, so the easiest way to do this is to modify the InputMap to have the Enter key invoke the same Action as the right arrow key.
You can search the forum for my "Table Actions" (without the space) example that will show you how to do this.

Indesign CC crashes when I select the rectangle frame tool?? Its a custom page, tabloid with guides set.

My indesign crashes when I select the rectangle frame tool. Does it matter if its a custom doc set as a tabloid and guide lines? I have a project due and all I'm trying to do is add a picture I took.

See Replace Your Preferences

How do i make the old frame dissapear when i click a button for a new frame

I have a program were you have 2 buttons in a frame. When you click on a choice a new frame pops up with another choice. I wanted to know how can i make the old frame dissapear after the user makes the choice and the new frame has come up?
Thank you,
Dan

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Frame extends JFrame implements ActionListener
     private JButton Three;
     private JButton Four;
     private JButton One;
     private JButton Two;
     static int num = 0;
public Frame()
     JPanel p1 = new JPanel();
getContentPane().add(p1);
     if(num == 0)
     p1.add(One = new JButton("Admin"));
     One.addActionListener     (this );
     p1.add(Two = new JButton("Buy"));
     Two.addActionListener     (this );
if(num == 1)
     this.dispose();
     p1.add(Three = new JButton("Password"));
     Three.addActionListener (this);
if(num == 2)
     p1.add(Four = new JButton("Product-ID"));
     Four.addActionListener(this);
public void actionPerformed(ActionEvent e)
     if (e.getSource() == One)
          num = 1;
          Frame g = new Frame();
          g.pack();
          g.setVisible(true);
if (e.getSource() == Two )
               num = 2;
               Frame h = new Frame();
          h.pack();
          h.setVisible(true);
     if(e.getSource() == Three )
          System.out.println("Password");
     if(e.getSource() == Four)
               System.out.println("Product-ID");
public static void main(String[] args)
     Frame frame = new Frame();
frame.pack();
frame.setVisible(true);

How to Select the Current Row When Using af:iterator?

Hello all,
I encounter the following problem when using af:iterator to display data from
a View Object:
When trying to display the content of a row via a popup, only the first row is
returned no matter which row is selected. So a selection of the current row
should exist or some other method which should allow the access to the
current row.
The af:table has a selectionListener attribute which permit to achieve this.
Does anyone know about some similar attribute or some method for
selecting the current row when the af:iterator is used?
Thank you,
Mirela

I would be interested in the answer to this basic question as well. I cannot get the selected row value of an attribute in an iterator for a view if I simply set-up a attribute binding to the iterator. It seems that this should be possible. I've had no other option but to obtain the current row and the related attributes programmatically. This works fine, but if there is a more elegant option, then I'd certainly like to use it.
          <af:table value="#{bindings.CompaniesView1.collectionModel}"
                        var="row"
                        rows="#{bindings.CompaniesView1.rangeSize}"
                        emptyText="#{bindings.CompaniesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                        fetchSize="#{bindings.CompaniesView1.rangeSize}"
                        selectedRowKeys="#{bindings.CompaniesView1.collectionModel.selectedRow}"
                        rowBandingInterval="0" id="tCompanies"
                        summary="Companies"
                        width="100%"
                        rowSelection="single"
                        binding="#{CompanyBackingBean.companiesTable}">Page Def:
    <attributeValues IterBinding="CompaniesView1Iterator" id="Id">
      <AttrNames>
        <Item Value="Id"/>
      </AttrNames>
    </attributeValues>I should be able to get the Id attribute value of the current selected row using "#{bindings.Id}", right? Well, it doesn't work for me. Any ideas?
Thanks

How do I select the Poster Frame when exporting to video?

Similar Messages

Maybe you are looking for