How do I send raw video and audio data to FMLE?

Hi,
I have raw video and audio data on CPU memory.
How do I send them to FMLE?
Is there sample code or SDK?
Thanks for your answer.

Hi, Burzuc.
Raw video and audio data are from a video capture board like Blackmagic Design's DeckLink or other's.
I want to stream them after some processing by my application.
Regards.

Similar Messages

How I can link back video and audio after I unlink them

how i can link back video and audio after I unlink them

In what program? You may wish to ask such specific usage questions in the product forum for whatever tool you are referring to...
Mylenium

With newer MacBook Air, sending both video and audio to an LG TV works fine, but I want to send the audio to a sound bar attached to the TV. Any way to do this?

I am trying to get audio to play through the soundbar attached to the TV for great sound. Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers. If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all. The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV. I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar. Any solutions will be appreciated.

its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
power down your Mac
connect firewire from camera to Mac
power on camera and insert tape in camera and play back
power up Mac
start QuickTime
File > Preferences > record tab
video source - select the camera you have
sound source - select the camera you have
quality - select device native
the video should show in the QuicTime window
a green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
rewind tape and playback
click on red button to start recording

How to align or sync video and audio?

In Premiere 13, once I have added a video/audio clip and then either slow down the clip or add photos in between the clip causes the video and audio to be out of sync. How does one re-align or re-sync the clip once it has been edited? Thanks

mrsndmn
On what computer operating system is your Premiere Elements 13 running?
There are several ways to avoid disturbing an existing Timeline when you are adding to it.
1. Using what are called keyboard modifiers, such as Ctrl or Alt (Windows).
2. Grouping block of clips so that the clips move together
The following video tutorial is offered for informational and not promotional reasons
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
It uses a version of Premiere Elements earlier than 13, but the principles involved are the same.
The video and audio that are going out of sync.... are they linked or grouped before the addition to the existing Timeline?
After the fact, you will need to move the Timeline components back in place.
If the video and audio are not linked or group, you can
(a) highlight the clip, hold down the Alt key of the computer main
keyboard and tap the appropriate arrow key for a 1 frame per tap nudge of the clip.
(b) highlight the clip, hold down the Shift+Alt key of the computer main
keyboard and tap the appropriate arrow key for a 5 frames per tap nudge of the clip.
Please review and consider. If questions or need clarification on the above, please do not hesitate to ask.
Thank you.
ATR

I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

Why is FCPX not allow me to cut both video and audio tracks at the same time?
My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

fulei wrote:
The audio track does not edit along with the video. They go out of sync
Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
Russ

How to sychronise a streaming video and audio?

Hello everyody,
I created a player application which plays a streaming video together with a sound. In the beggining it starts ok and sychronised but later video goes slower than sound and as a result they are totally out of sych at the end. I believe the problem is that the video file is bigger than the sound file and it buffers more so the video always stays behind the sound. Is there any way to fix it and have my video and audio always sychronised? To have the sound embeded with the audio is not an option.
Thank you in advance.

mrsndmn
On what computer operating system is your Premiere Elements 13 running?
There are several ways to avoid disturbing an existing Timeline when you are adding to it.
1. Using what are called keyboard modifiers, such as Ctrl or Alt (Windows).
2. Grouping block of clips so that the clips move together
The following video tutorial is offered for informational and not promotional reasons
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
It uses a version of Premiere Elements earlier than 13, but the principles involved are the same.
The video and audio that are going out of sync.... are they linked or grouped before the addition to the existing Timeline?
After the fact, you will need to move the Timeline components back in place.
If the video and audio are not linked or group, you can
(a) highlight the clip, hold down the Alt key of the computer main
keyboard and tap the appropriate arrow key for a 1 frame per tap nudge of the clip.
(b) highlight the clip, hold down the Shift+Alt key of the computer main
keyboard and tap the appropriate arrow key for a 5 frames per tap nudge of the clip.
Please review and consider. If questions or need clarification on the above, please do not hesitate to ask.
Thank you.
ATR

How can I incorporate several video and audio clips into one iMovie project?

Hello all. Basically, I'm trying to solve a problem before it becomes one. I'm going to put together a short iMovie project for a thank-you dinner. Several people from out-of-town will not be able to make the dinner. I want to give them the opportunity to "speak" by having them put together a short video or audio clip. I then need to gather up all the clips and put them together in one iMovie project. I guess I'm looking for some assistance in terms of format, what types of files/formats to use, etc. I've done a few movies (mainly from still pictures -- glorified slideshows with music). But, I'm still a relative neophyte when it comes to the computer world. Any assistance would be greatly appreciated. (feel free to point to a "How to " tutorial if there's a good one out there).
Thanks.

your problem will not be the process of 'glueing stuff together'
follow advice given here
http://www.apple.com/support/imovie/
under 'Getting started' or follow the 'Video' tutorials ...
the real task is, to make all clips readable for usage in iM ...
before making you a technician on video-codecs:
download and install the free tools Mpeg Streamclip and Perian.org
you have to relaunch your Mac after doing so...-
BEFORE adding any of your external sources into an Event, use Streamclip to manually convert to DV, or if source is HDef, to Quicktime/Appleintermediate.
the resulting files should import flawless into iM, proceed as usual.
iM 'swallows' a lot of formats, so it could be this manual conversion isn't needed ...
don't hesitate to come back here, if probs occur ...

How can I synchronize my video and audio?

I loaded a movie clip from my camcorder into FCE, no problem. Except. My audio and video are not synchronized, off by just a hair. Maybe two.
I checked a previous forum thread and read that my camcorder audio setting should be 16 bit (which it is) and 48 kHz ( I can not find anywhere a reference to mHz in my Panasonic GS300 menus) AND must match the settings in FCE.
Thus armed, I selected my movie clip in the Browser, right clicked for the pop up menu and item properties showed a mHz of 32.0
Uh, oh.
I checked User Preferences and System Settings in FCE but could find no reference to mHz there, either, let alone how to change them.
Now, I DID find, System Settings - External Editors - Audio Files a SET button, which to my feeble mind looked promising, but when I clicked on SET, up popped a Finder window of my old iMovies. How did THAT happen?
In brief. Was that good advice in the previous thread? Is this what I should be doing? And can you tell me, in simple terms - very simple - how to proceed? Please?
Allosaurus

16bit is the same as 48kHz and 12bit is 32kHz.
In the Easy Setup, "DV-NTSC" is the 16bit/48kHz setting and "DV-NTSC 32kHz" is obviously the other!

How do i send multiple videos and photos by email ? thanks

Hi I have an iphone 4s and a macbook air. i took photos and videos on my iphone during a recent visit to Cuba. i have got them onto my macbook air but i have no idea how to send them to my friends. i wanted to use email also i dont know how to choose multiples and then send them. any help would be appreciated.

likely your email server wont allow HUGE video files
upload vids to your youtube account, or create one.
make the videos private if you have to, everyone does it.

How can i send multiple videos and photos, via mail, at the same time?

you allowed to send only one video or 10(+) photos via mail.
but can you send both at the same time? so 10(+) photos and a video (or more than one) in one mail?
because if my mom has birthday pictures or something like that. She likes to be able to send it directly from her iphone to every person she knows in just one mail.
anyone any tips or tricks?

Those restrictions are generally part of the email provider, not just the phone. Attachments are restricted due to size, bandwith use, etc. Trying to send that much information in an email attachment is even restricted on a computer. Sharing via photo sites is generally a better option for large amounts of pictures and large video files.

How do I play a video and audio file at the same time on Apple Tv?

I need to play a video loop (with no audio) on my apple tv and also play some music in the background. Its a video loop with no audio and then I need music to play in the background. The loop needs to repeat all day because its only 5 min long and the audio is an entire play list that's several hours. This is for a lobby flat screen setup.

QuickTimeKirk wrote:
Very difficult request because the Apple TV can only play one file at a time. It doesn't have a "loop" feature.
You could use QuickTime Player Pro to "join" the audio files into one file. The hard part would be adding the five minute video chunks via copy/paste as each would be added as a new "video" track. QuickTime .mov files can have up to 99 "tracks" and the .mov container is supported by Apple TV.
So this new file would have a new video track (actually just a copy of the original) that played up to 98 times. A five minute source video would end up being a bit over 8 hours in duration.
The 98 track video could be "flattened" into one video track via export. The same for the audio track movie.
Other options:
Set the Quicktime Loop flag in the movie inspector properties.
Make a video playlist, adding the file to the playlist lots of times - make sure playlists are enabled in Settings for video not just music.

After I create a flash swf file how do I edit the video and audio?

I created a nice flash animation, but it appears there are no video editing program which edit swf files.
Why would flash create a file that cannot be edited in video editing programs including their own premiere pro?
I have to get a program to convert the swf to an flv file and then I can use a video editing program?
I tried exporting it to an avi, but much of the functionality was lost. I am looking at a man standing there instead of
moving his lips while talking, for example. Am I missing something? Please advise. Thanks!

If you have an swf file then you don't have a video to edit. You can export to a limited number of video formats from Flash. In order to do that successfully, you need to prepare your file so that it will export as you want. This means that you will have to produce the entire file as a linear sequence using the timeline and with no interactivitiy. You can use a limited amount of Actionscript, but it is a very small subset of the available language. Your audio must be in the timeline.
Here is an Adobe help file for exporting to video: Flash Professional Help | Exporting Graphics and Videos

How to combine rtp data containing video and audio?

Hi
I have a problem. I was examining with AVTransmit3.java and AVReceive3.java. I found that AVTransmit3 sending video and audio with different ports. It's okey as it is done as JMStudio. but my question is how can I receive this packets as raw bytes and combines them into one media file to play at a time in a player. May be very fundamental question but tough for me as i m novis as jmf programmer.
waitin for repply...................

Look in the JMF Guide regarding multiplexors and demultiplexors. It give the whole breakdown of how this works (and I think examples).

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

I have a new Mac Mini, and I want to send raw video...

I have a new Mac Mini (Lion), and I want to send raw video to the Internet, using Ustream, Skype or other services. I don't need cameras, microphones, or other periphrals. My video consists of 1 volt composite (from a video switcher), and the audio is full stereo at 600 ohm line level on each channel. What do I need?
I have a video capture card on my Windows machine; but the results have been crappy at best. And the so-called "Geek Squad" at Best Buy (where I bought the Mac Mini) have been less than helpfull. Further, the on-line Apple Store shows nothing. Maybe someone here has an idea.

You are going to need a video capture device of some sort and I believe the following will be suitable.
http://www.elgato.com/elgato/int/mainmenu/products/Video-Capture/product1.en.htm l
It is available in the US as well http://www.elgato.com/elgato/na/mainmenu/products/Video-Capture/product1.en.html

How do I send raw video and audio data to FMLE?

Similar Messages

Maybe you are looking for