How do I separate two movies on the same timeline?

I'm using Premiere Elements 11 but have not used it for a while so I've forgotten much of what I've learned. So here is my question: I have two movies on the same timeline. How do I separate them. In other words, how can I move one over on the timeline so it will not confuse my editing of the other one? But better yet - how can I just take one movie off the time line completely and edit it later as a separate movie. I really have four short movies - one minute long. I'd like to edit them separately, with a new file name. I don't know how to do this anymore.

Tommyvincent
I have been doing some homework on the questions that you raised in this thread.
Observations....
1.
After you import a video into Project Assets, you can right click it, select Rename. That file when dragged to the Timeline will have the new name.
But...
If you import a video into Project Assets, drag it to the Timeline, right click the Timeline clip, select Rename from the pop up, then the Timeline file will be renamed but not its thumbnail in Project Assets. You would have rename that Project Asset thumbnail to match if you wanted to. But, these renamed files still trace back to the original with its original file name at its hard drive save location.
2.
About getting off your Timeline...one way would be to export the clip selectively if it were in group of clips on the Timeline. Two requirements for that
a. In Edit area, set the gray tabs of the Work Area Bar to span just the segment to be exported
and
b. In the export area, have a check mark next to "Share Work Area Bar Only" option.
3.
If you brought a clip into Project Assets, double clicked it to open its Preview Window, you could trim the clip with the Set In and Set Out points and create "subclips" with new names in Project Assets. These "subclips" would be part of that project's media that could be dragged to the Timeline when needed.
Please review and determine if any of the above is going in the right direction for what you want to do.
Thank you.
ATR

Similar Messages

How can I make two copies of the same picture one with my watermark and one without for printing for clients?

how can I make two copies of the same picture one with my watermark and one without for printing for clients?

Export the photo twice, once with a watermark and once without a watermark.

How can i add two values under the same property?

Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?

Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith

How can i distinguish two controls with the same name?

I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
In that web application it is possible to enter data in something looking like a list.
There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
Unfortunately the controls have no ID.
Is there a way to distinguish controls with the same name?
Thanks in advance!

Hi Patrick Pirzer,
>>Is there a way to distinguish controls with the same name?
Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
so if two controls have the same property, please use other unique property as the search property would be better.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

How can I produce two outputs of the same project

Dear Sir,
My aim is to produce two outputs of the same master project,
HTML help and Webhelp each one will be used differently in my
compnay.
Producing two outputs is fine but the problem was that
external links are done differently for HTML help and Webhelp and
as I Knew from you that this can be solved using conditional tags.
Actually I am new to conditional tags and I don't know how to
use them. Could you please help me to do this or recommend a link
on how to use condtional tags to produce different outputs.
Thank you very very much

Hi there ahlam323
See if the link below helps any. Some goober wrote something
on it.
Click
here to read the goober's guide
Cheers... Rick

How do I open two profiles at the same time?

until i updated to Firefox 7 i got prompted to which profile i want to open every time i open firefox, i am using one profile to play and one for work. i get prompted the first time but not the rest of the time how do i fix it so that i can again run two profiles at the same time

See:
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Open two movies at the same time

It seems that it is not possible to open two movies (.cp) at
the same time with Captivate 1 (well you can run a new Captivate
program an open the second movie) but will it be possible to open
more than one movie at the same time in Captivate 2?
Thanks

Hello hydrosound,
Whilst you cannot open two Captivate movies in the same
instance of Macromedia Captivate, you can get around this by simply
loading another copy of Captivate. I do this all the time and open
the second project file that way.
HTH
Regards,
Mark

How do I join two tables in the same database and load the result into a destination table in a SSIS package

Hi,
I have a query that joins two tables in the same database, the result needs to be loaded in a destination DB table. How do I do this in SSIS package?
thank you !
Thank You Warmest Fanny Pied

Please take a look at these links related to your query.
http://stackoverflow.com/questions/5145637/querying-data-by-joining-two-tables-in-two-database-on-different-servers
http://stackoverflow.com/questions/7037228/joining-two-tables-together-in-one-database

How do I put two galleries on the same page?

What's the "trick" to putting two galleries on the same page?
I've been experimenting, but it's not working out well. I have one working, but when I put the seond one on, all sorts of unexpected things happen. The first gallery goes up "over" the banner (it covers it??) and even though the sizes are spec'd the same, the second one shows up a lot larger as well.
It's very weird.
Any insight would be appreciated!
Thanks!
Michelle

Juan,
When Application Express finds a validation error, the page rendering step is executed again in the same database process used for the validations. So the procedure wwv_flow.accept, which is doing your validations, calls wwv_flow.show (a PL/SQL call) and passes information about the validation errors to the show procedure so that error text can be merged into the page rendering process.
If you want to simulate this you might need to save validation info in collections and build the "show" part of the page so that it knows how to run in "validation-display" mode, i.e., to be able to use the collections.
Scott

How to check wwheter two files are the same?

Hi,
I need to check wheter two files are the same. Their names and paths may be different. How to do that? Do u have any links / examples?
Important notice: Files used in the application will be big (ie 1, 2gb)

Comparing a hash, if you have to calculate it each
time, is bound to be slower than a byte by byte, or
character by character compare.
This kind of comparison is used mostly in things like
content management systems, when a new file of data
is checked to see if it's identical to a file already
entered, hash values being stored for each file
already in the system.
And comparing the hashes can only prove the files are
different, if the hashes are equal that doesn't
absolutely guarantee that the files are the same.
Normally you'd confirm a matching hash by actually
comparing file content.Depends on how good your hash is..but in general...yes. I was only saying that it's faster if you're always maintaining a has of the file.

How to make 2 balls move at the same time

I am working on an app in xcode and I need to make 2 balls move at the same time. When I try to use the same code for both of the balls, the 2 CGPoints interfere. Here is my code in the .m file.
@synthesize ball, ball2;
-(void) onTimer {
        ball.center = CGPointMake(ball.center.x+pos.x,ball.center.y+pos.y);
        if(ball.center.x > 295 || ball.center.x < 10)
            pos.x = -pos.x;
        if(ball.center.y > 435 || ball.center.y < 35)
            pos.y = -pos.y;
- (void) onTimer2 {
ball2.center = CGPointMake(ball2.center.x+pos.x,ball2.center.y+pos.y);
if(ball2.center.x > 295 || ball2.center.x < 10)
pos.x = -pos.x;
if(ball2.center.y > 435 || ball2.center.y < 35)
pos.y = -pos.y;
[self collision];
- (void)viewDidLoad
          [[NSTimer scheduledTimerWithTimeInterval:0.04 target:self selector:@selector(onTimer) userInfo:nil repeats:YES] retain];
    [[NSTimer scheduledTimerWithTimeInterval:0.04 target:self selector:@selector(onTimer2) userInfo:nil repeats:YES] retain];
    [super viewDidLoad];
    // Do any additional setup after loading the view from its nib.
Here is my .h file
@interface game : UIViewController {
    IBOutlet UIImageView *ball;
    IBOutlet UIImageView *ball2;
@property(nonatomic,retain) IBOutlet UIImageView *ball;
@property(nonatomic,retain) IBOutlet UIImageView *ball2;

What do you mean by the 2 CGPoints interfere?
You're changing the location of the balls by pos.x and pos.y, where is the code for those? what is it doing?
Why have two timers? One timer would work , just have the code move both balls.
The refresh rate for the screen is 60hz. (60 time a second) You'll get better animation if you stick as close to this value as you can.

How do you sync two Ipods to the same MacBook?

Have a nano already synced to my MacBook. Want to also sync my 5th gen 30GB Ipod to the same MacBook. Have only had my MB for 3 months after 18 years of PC platform (yes I'm drinking the KoolAid baby.) This notebook is fantastic.
An issue I had with my old PC was that you couldn't sync two Ipods to the same PC unless you held down the shift key while accessing ITunes to select a library - or something like that.
Please tell me that if I plug my 5th gen into this MacBook it won't overwrite my nano songs/info that are already on this MacBook? Apple has to have done it easier than how I had to do it with the PC. Any help from you experts out there will save me a ton of grief..........Thanks! R.Ty

Thanks!
No problem.
My issue is however that in addition to all of the songs that I have purchased via ITunes, I have about 600 songs from my own CD's on the 5th Gen that if I restore will be gone. Time - yes....money - a little.... It would be great if I could de-authorize the PC it was synced to and now work off my mac....
In that case, check out these different media recovery options by Zevoneer for copying music from your iPod to your computer.
http://discussions.apple.com/thread.jspa?threadID=1900086&tstart=0
And check out this older post of mine on different ways to copy music to your computer from your iPod as well.
http://discussions.apple.com/message.jspa?messageID=12000345#12000345
What you need to do is first copy all the music currently on your 5th generation iPod to your new Macbook. Once you have done that, you are free to *Erase and Sync* it upon plugging it in, or restoring it via iTunes as described above.
And if you are adding purchased music, you will need to authorize your computer if you haven't done so yet. To do this, choose Authorize from the Store drop down menu in iTunes.
B-rock

How can I sync two Bolds with the same contacts?

I have two bolds and are trying to sync them both with the same contact list.
The first bold has all the contacts and I sync that phone using the BB Desktop manager setup with Outlook Express main identity.
When I try to sync the second bold with the same setttings, outlook express and main identity, none of the contacts transfer to the new bold, why?
What is the best way to sync two phones to the same contact list?
Claim your missing money with foundmoney.com today Missing money

Any solutions to this please ????
Claim your missing money with foundmoney.com today Missing money

How can I open two libraries at the same time on itunes?

Hey i need help on opening two libraries at the same time on itunes. I don't know if that is possible but need some advice if its possible. I already have several libaries but I need to compare labaries at times due to various users on my computer. Please help .

Not that I'm aware of. What exactly is that you want to achieve? There are tools for scanning media folders and adding any files not listed in the library, or deleting those that no longer exist. There are also ways to use one library for multiple users so that any tag update gets applied for everyone.
tt2

How do I separate two movies on the same timeline?

Similar Messages

Maybe you are looking for