How do i set burn speed in iphoto

i know i can use the finder to burn cd's of photos and i know i can adjust the burn speed in the finder.  is there anyway to adjust the burn speed straight from the iphoto app?  i keep getting medium disk errors unless i slow the burn speed all the way down.  and please dont tell me to buy different cds, i just want it to work with what i have.
thanks
chad

is there anyway to adjust the burn speed straight from the iphoto app?
No.
Regards
TD

Similar Messages

  • How Can I set my speed of clip to 0%?

    How Can I set my speed of clip to 0%?
    I can't do that. A minimum value is: 1.00

    So I HAVE TO do this in that specific way? I can't normally set a "0%" value of speed curve?
    Ann Bens wrote:
    Cut it there and do a frame hold or a screen grab.
    But how I have to do a frame hold if I can't set speed of one frame to 0%
    Ann Bens wrote:
    Use a time remapping freeze frame instead if you want 0 speed.
    What a rubbish did you say? I am in Time remapping freeze menu and IN THIS MENU we can't set a value to 0%. A value: 1.00% is a minimum.
    You have to miss a screen what I paste before, so specially for you (there is even a red box):

  • How do i set up "print to iPhoto" from pages

    How do i set up "print to iPhoto" from pages

    lamen88 wrote:
    How do i set up "print to iPhoto" from pages
    I wasn't aware that you could do that directly. Did you see that witten somewhere, or are you asking if it is possible?
    My approach would be to Print to PDF, use Preview.app to export the PDF to PNG and drag the PNG file into iPhoto.
    Regards,
    Jerry

  • How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone.  I find nothing in the phone or in the manuals on how to set up speed dial.

    How do I set up speed dial?  My contacts ported over from my old phone, but the speed dial settings are gone.  I find nothing in the manual or online about speed dial.

    BToddP, I completely understand wanting to customize your phone the way you once had it on your old phone. Fear no longer, help has arrived! Please review this link for additional assistance: http://spr.ly/6588AEzw Let us know if you need any further assistance. Thanks!
    KristieQ_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • How do I set up speed dial?

    How do I set up speed dialing on my iPhone 4S?

    It is called Favorites.
    iPhone User Guide (For iOS 5.1 Software)

  • Setting Burn Speeds in DVD studio 4

    Hello,
    I want to burn a master copy for a dvd i am making and i was wondering how you set the slowest burn speed to ensure the highest quality? Thanks very much.
    -Phil Smage

    You can't change the burn speed in DVD Studio Pro. In order to burn at a slower speed, you'll need to create a disc image and burn that with something like Toast or Disk Utility.
    To create a disc image, do a Build & Format. In the Destination section of the window that appears, change the output device from your burner to "Hard Drive". Leave the Output Format at ".img" since it sounds like you're just burning copies and aren't sending it to replication.
    When it's done, burn this disc image with one of the above listed programs and you'll be able to change the burn speed.
    Note that if you're creating a disc image of a dual-layer project, the break point you specified will be lost, and Toast will simply fill up the first layer and then switches to the second. This is because no layer break information is included in the image file.
    If you have Toast, you can also just build the VIDEO_TS folder and burn a disc from that. Toast 7 and above is smart enough to ignore the extra files that DVDSP puts in there.

  • Disk Utility : Cannot set burn speed

    I've created a DVD disc image from DVDSP3 and want to burn it to a new DVD-R at less than 8x speed, but Disk Utility has greyed out the speed setting.
    What am I doing wrong?
    Thanks!
    -Bob.

    Yes, you can set the burn speed in the iDVD '08 Preferences (finally).
    I just can figure out what your problem is with Disk Utility - it's probably something simple we are overlooking.
    +++++++++++++++++
    You are CERTAIN that the DVD you tried had not already been burned to?
    Message was edited by: F Shippey

  • Possible to set burn speed with DVD Studio Pro?

    Is it possible to set or adjust the burn speed with DVD Studio Pro ver 3..?

    Build in DVD Studio Pro, then burn in Toast. Toast will let you adjust the burn speed.

  • Burn speed for iPhoto...?

    Greetings,
    A friend of mine had a Mac Pro 2x 2.66 Dual Xeon, 2 GB, running Mac OS X 10.4.11. He encountered a problem burning a DVD-R from iPhoto '08. He got a media error with a Sony DVD-R disc. He says he hasn't had any problems with his dual Pioneer DVR-111D drives (firmware AB09) and this media.
    Is there any way to change the write speed for iPhoto '08?
    TIA

    Did he try another Sony disk? It might be just one disk.
    Happy Holidays
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Cannot Set Burn Speed in Disk Utility

    Hi all,
    It's been so long since I posted a question (years), I had to redo my settings and start over! Anyway I plan to make multiple DVDs from an FCE project of my daughters soccer season. I've done this in the past and make about 20 per season, but had trouble making then all work using iDVD'06. (Made alot of coasters.) I use Maxell or Verbatim DVD-R both at 16X. Then I was reading here about making it a disk image and then burning it at 4x with Disk Utility. I tried a test of an existing disk image file I made, but the speed option is 'grayed out' for some reason. Not sure why it is not selectable. I did the following:
    1. Opened Disk Utility
    2. Clicked on the .img or .dmg file
    3. Clicked the Burn icon
    4. A new window dropped down and I inserted a DVD-R
    5. Clicked the 'Close' button
    6. The speed selection is 'grayed out' but the 'Test Only' radio box was available
    7. Hover my mouse over the 'grayed out' selection and it says 'Select a slower speed to work around burn failures', but I can't
    Appreciate any help.
    Thanks,
    Rod

    Yes, you can set the burn speed in the iDVD '08 Preferences (finally).
    I just can figure out what your problem is with Disk Utility - it's probably something simple we are overlooking.
    +++++++++++++++++
    You are CERTAIN that the DVD you tried had not already been burned to?
    Message was edited by: F Shippey

  • How To Control DVD burn speed?

    I want to burn the DVD at some speed lower than the default of 8X. How can it be controlled?

    Hello Doc,
    I want to burn the DVD at some speed lower than the default of 8X.
    Wise decision
    You'll need to create a disk image (File > Save as Disk Image) in iDVD. The resulting .img file can then be burned with either Disk Utility or, if you have, Toast.
    hope this helps
    mish

  • How do I set ethernet speed to 100 Full?

    Right now we connect at 100 half duplex. I need to change our Mac lab to 100 full but I can't find how to do it. We are running Imac G5's with Tiger. Please help. Thanks in advance

    System Preferences>Network>Show:>Ethernet>Ethernet Tab>Configure=Manually, Speed=100, Duplex=Full... Apply.

  • Everytime I start firefox my speed dials are emtpy, how can I set my speed dial to keep what I put on it

    '''I have set up my speed dial with my favorite websites but everytime I go out of my firefox browser then start it up again my speed dial shows up as empty...why is this?'''

    In case you are using "Clear history when Firefox closes":
    *do not clear Browsing History
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

  • Just got U-verse today, how do I set up speed dialing on my phone, I had it with the ATT service, but it does not work with the UVerse

    OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
    Looks like the simple part is using it  - just press and hold the digit to dial the whole number.
    So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)

    Seemed like there should be a speed dial, so I did  a search & found the cure is worse than the disease -
    Dial from your phone
    Make calls directly from your existing touch-tone home phone:
    Local calls: Dial the 7- or 10-digit phone number.
    Long distance calls: Dial 1 + area code + 7-digit phone number.
    International calls: Dial 011 + country code + 7-digit phone number.
    Dial online from your myAT&T account
    Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
    Log in to myAT&T. Don't have a myAT&T login? Register today!
    From the I want to menu, select Manage my plans and services and then Manage my phone features.
    Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
    Enter a number to dial or select a number from your Call History or Address Book.
    Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
    Select Place Call.
    When your home phone rings, pick it up to place your call.
    Important Note
    To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
    Dial from your U-verse TV
    With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
    Tune to Channel 9900 using your U-verse TV remote.
    Select a U-verse Voice phone number on screen.
    Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
    Scroll using the arrows.
    Select a number and press OK to return a call.
    Select Call and press OK.
    When your home phone rings, pick it up to place your call.
    You can have a call list accesed from a browser.
    You can call back a historical call from the browser or TV.
    https://www.att.com/esupport/article.jsp?sid=KB401002

  • How do I set Link Speed and Duplex Mode of NIC Card

    Hi All.
         I

    I'm working on the tester to verify the various speed at UUT by sending command on those speed and check response.
        I used to try Devcon but only disable and enable NIC Card that I know for now. If someone experience on this thing, that would be great.
    Abdulnasir

Maybe you are looking for

  • After upgrading to Mountain Lion, I cannot open iCal/Calendar.

    I get a message saying: "Calendar Cache" couldn't be moved because you don't have permission to access "Calendars". I have tried altering the permissions so that I have read and write access for Calendar app but it still says the same. Please help!

  • Segment Derivation in New G/L

    Dear Experts, I'm assessing the chance of activating New G/L functionalities and I would like to have more information on Segment derivation. Segment has been introduced with new G/L and, and it can be derived in 3 ways: - Directly linked in the Prof

  • Remove rows in dba_rep views.

    I am having trouble removing replication from a master definition site. I can't create a new replicated environment while an old one is still "hanging around". I thought I removed replication correctly, but the dba_rep views still have data. How do y

  • OOB Project Server 2013 BI Excel Report Issue

    Dear Folks, I have been facing problem  when I try to open OOB BI Report called "Project Overview Dashbaord" from inside the EPM. It shows blank screen when I open, If I try to refresh all connections then it gives me following error message: =======

  • Programmatically save O365 Outlook attachments to either OneDrive or a local file system

    .csv files are emailed as attachments every 15 minutes to an Outlook email account in Office 365.  I would like to save each of these .csv files to a folder on either One Drive or to a folder on a local file system.  How can this be accomplished thro