How do I set default start date for email flags

In IOS 4 and 5 every time i put a flag on an email it used "today's date" as the default date for the flag when the flag synched with Outlook. Under IOS6, my email flags show up in Outlook with "no date". Is this an IOS 6 change or did I somehow change the default to "no date" by mistake on my iphone. This is importatnt becasue Outlook allows you to arrange you inbox by Flag Start Date. When you arrange it this way, all the flagged emails move to the top by date. You can then remove all the non-flagged emails as a group.

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

Similar Messages

How do I change the start date for the week from Monday to Sunday on my iPhone 5?

How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag. How can I set default priority to low = no flag?

The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag.
I have found the flags to reduce the priorty level manually to "low Priorty", but how can I set default priority to low = no flag?
Thank you for advising,

Try deleting the .plist.
Quit the application.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

How can I set up auto respond for email

How can I set up auto respond for email?

Hey there jimmac169,
It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
Mail (Yosemite): Reply to, forward, or redirect messages
Automatically reply to or forward messages
Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account.
Choose Mail > Preferences, then click Rules.
Click Add Rule, then type a name for the rule.
Indicate whether any or all of the conditions must be true for the rule to be applied.
Set the conditions that determine which messages to automatically reply to or forward.
Choose options from the “Perform the following actions” pop-up menu.
Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages.
Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply.
Click OK.
Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules.
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT201320 how do i set up read receipts for emails from the iphone?

how do i set up read receipts for emails from the iphone?

That is not a feature of the Mail app. Check with your email provider to see if it's a service they offer.

How to programmatically set formatted javascript dates for validation?

How does one programmatically set formatted javascript dates for validation?
"12/31/2011" does not seem to work?

ourDate.rawValue = "2011-12-31"; // works
NOTE: if you have a hierarchy issue you may need something like
root.body.table.detail.ourDate.rawValue = "2011-12-31";

How can I set an validity date for a given vendor?

Hello,
we are currently trying to set a "validity date" for vendors.
Basically, our vendors need to be audited, and are "accepted" for a period of time, beyond which we'd need to re-audit them.
What we'd like the system to do is block use of the vendor if this date was exceeded.
Anyone has an idea on the way to achieve this?
PS: We know that there is a way to do this at the material level, we instead wish to manage it centrally for the vendor
Tx

Hello Nisha,
before doing business with a new vendor for services, our QA group needs to go thru a serie of verifications. We check various things such as insurance, certification,...
Once "approved", the vendor can be utilised by the plant for a certain period of time, after which a "re-audit" is necessary.
What I'd like to implement is a field where the QA group would enter this date, after which the vendor would be automatically blocked for usage.
This would then trigger the "re-audit" followed by the release from QA (who'd re-modify the date with the new one), and so on.
The vendor is not necessarily used for supply chain. Sometimes, it could be for services , maintenance, or other.
Tx for the ideas.

How to set a start date for inputDate calendar

The inputDate component in the ADF faces library is not allowing the user to choose a start day other than the current day for the calendar. (We are using JDeveloper 11.1.1.0.0) We found out that a fix was made to MyFaces trinidad in July 2006 for this exact issue(http://issues.apache.org/jira/browse/TRINIDAD-458).
Does anyone know if this fix ever made it to the ADF library, or if there is an existing way we can resolve this issue.

Dear Rohan,
You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
Regards,
Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

Setting up start date for automatic backup

IS there instructions on how to set up automatic back up setting start date WD Element 3 tb external hard drive. I have previous backups on another external drive and do not want to duplicate what I already have backed up...any help would be appreciated...mo_reb

Hello, welcome to the community.
The WD Elements does not have any backup software to do this, you will need a third party software to perform a backup with this drive.

Ability to set same Start date for two different discrete Job in ASCP

We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP.
E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days
ATO_Model2*325325, the rolled up LT=3
So, under normal scenario ASCP will suggest two different release dates based on LT. So, I would like to start both Job togther considering the max leadtime.
Hoping for your expert advice.
Thanks
Edited by: user604737 on Nov 10, 2010 9:55 AM

Hi,
964188 wrote:
It is a date
Such as
10/31/2012 11:55:03 PMThen, as Hoek says, you don't want TO_DATE. For example:
WHERE   TRUNC (start_datetime) = TRUNC (SYSDATE - 7) or the more efficient
WHERE   start_datetime >= TRUNC (SYSDATE - 7)
AND     start_datetime < TRUNC (SYSDATE - 6)Also, it doesn't look like the EXISTS sub-query is corelated to the main query. That's almost certainly a mistake.
If you're still having trouble, post your revised query, a little sample data (CREATE TABLE and INSERT statements). Point out where that query is givimg the wrong results, and explain how to get te right results.
See the forum FAQ {message:id=9360002}

Setting default opening date for iCal calendar to be some future date?

Is it possible to set the default date at which an iCal calendar opens to be some specified future date?
I want to enter multiple events for a week-long program that begins on November 1, 2008, into a special iCal calendar for that program, as the dates and times for those events become known between now and then. So, each time I click on that calendar's icon, I'd like to have it open at 1 Nov 08, instead of having to step forward to that date each time I re-open the calendar.
Any way to do this?

christ. no answer to this?
i just did this on a trip to boston and i /thought/ i had it fixed when i went to paris recently.
perhaps getting a new motherboard on my MBP means i have to set my settings again to get this to work? does anyone know if this only works by setting a /combination/ of settings on iCloud and in iCal preferences...?

How can I set default toolbar layout for all users in my system?

Hi everybody! I am running a local ubuntu server at my office. I can set some defaults preferences (about:config) for all new users in the system by defining those prefs in the /etc/firefox/syspref.js.
Now, I want to define default toolbar layout in a similar way (maybe not needed but fun), to copy the toolbar layout for my user. Is there a general way to do that?
thank you in advance!

You can try to create a default template folder (defaults/profile) in the Firefox and place the file(s) in that folder for newly created profile.
The only way to customize an existing profile is to copy files directly to it.

How can I set a due date for reminders?

I DO NOT want it to remind me at a certain time. I just want it to be due on a certain day. You used to be able to do this when the reminders were part of the calendar on icloud.com, but now you can only set a day AND a specific time for an alert about the reminder, which I don't need.
And as far as I can tell, you can't change it on the iPhone either. I'm guessing you can still change it on the iCal app on an actual Mac, but the whole point of icloud is that I don't have to carry my computer with me everywhere I go.

I found a round about way to get the DUE feature.
     click <<remind me>> and set a day
     select <<daily>>
     clink <<done>> and exit
go back into the same reminder and you should see a due feature.
I then removed the reminder, but kept the repeat. As I use this for a check off for my bills.
I think this only works if the date you select initially is in the future.
Let me know if that works,
morenalx

How do I set default dvd drive for burning

I am looking for a way to set a default dvd writer.
The system I am working on has multiple writers attached (one is a duplicator).
Unfortunately, the software or OS seems to latch on to the most recently added drive.
In one instance it defaulted to a removable backup drive we attached.
I have been getting around this by using the "build and burn" option then using the drop down box to select the proper DVD writer.
Is there a way to set a default and eliminate this step and the confusion that results when people instinctively click "burn" and the machine tries to write to improper locations?
Thanks for your help, this has been a thorn in my side for quite some time.
DVD Studio Pro 4
OS X 10.4.11
-Scott

Well not what I wanted to hear but thanks for confirming what I had found to be true. Would still like to hear if anyone has any creative workarounds.

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How do I set default start date for email flags

Similar Messages

Maybe you are looking for