How do I set the audience when I'm using Siri on my iPhone 5 to post to Facebook
How do I set the audience privacy for when I’m using Siri on my iPhone 5 to post to Facebook?
When I ask Siri to post a message to my Facebook Siri tells me what I have said and then asks tot post it, I then checked on my computer and the post is visible to "ME ONLY" I can change this on the computer and on my phone via the App but I do not want to be doing that all the time.
If I post to Facebook via Siri on my iPhone 5 I want it at the default setting of friends only.
So How do I change this?
I posted the first one 2 minutes ago then went into Facebook via the App and changed it but did a second one hoping that the default privacy had changed but it was again to me only. As you can see via the padlock. Please help. Thanks
What if you do need help or emergency situation while Posting FB via Siri is the fastest way to show you or someone is in danger, and he/she is dying because the post is Only visible to Me !?!?!?!???
Anyone who uses FaceBook to get immediate help for life threatening emergency is mercifully removing themselves from the gene pool.
Similar Messages
-
How can I set the language when sending an e-mail with attachment - 'Html'?
"Character Broken"
I made an ALV program, and this convert to "HTML', and send an e-mail with this.
Used Process is:
DATA: gt_abaplist LIKE TABLE OF abaplist,
gt_html LIKE TABLE OF w3html,
doc_chng LIKE sodocchgi1,
objpack LIKE TABLE OF sopcklsti1 WITH HEADER LINE,
objhead LIKE TABLE OF solisti1 WITH HEADER LINE,
mail LIKE TABLE OF solisti1 WITH HEADER LINE,
reclist LIKE TABLE OF somlreci1 WITH HEADER LINE,
lv_line TYPE i.
DELETE FROM MEMORY ID '%_LIST'.
SUBMIT z_template
AND RETURN EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = gt_abaplist
EXCEPTIONS
not_found = 1
OTHERS = 2.
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
TABLES
html = gt_html
listobject = gt_abaplist.
doc_chng-obj_name = 'URGENT'.
doc_chng-sensitivty = 'O'.
doc_chng-obj_descr = ' '.
doc_chng-obj_langu = '3'.
objhead-line = ' '.
APPEND objhead.
mail[] = gt_html[].
DESCRIBE TABLE mail LINES lv_line.
CLEAR: objpack.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = lv_line.
objpack-doc_type = 'htm'.
objpack-obj_descr = ' '.
objpack-doc_size = lv_line * 255.
objpack-obj_langu = '3'.
APPEND objpack.
CLEAR: reclist.
reclist-receiver = 'e-mail address'.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
object_header = objhead
contents_bin = mail
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
SUBMIT rsconn01 AND RETURN.
I want to show this by "Japanese".
But the character is broken.
LIke This:
u01D1u072C u0205| u0205u072C u0508 QC u04B90m
How can I set the language? How can I solve "Charancter Broken" ?
Plesse, let me know.
Thank you so much.
Edited by: Jaime White 999 on Nov 21, 2011 8:45 AM
Edited by: Jaime White 999 on Nov 21, 2011 8:46 AMHi Jaime,
Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both objpack-obj_langu = '3' & doc_chng-obj_langu = '3' instead of '3' please replace it with 'J'.
Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
Regards,
Gokul -
How does one set the DPI when resizing images in Bridge?
I am sure I am missing something here (so excuse me if its a simple answer) but I am used to using Photo Mechanic and there you are able to set lots of variables while resizing. I don't understand this Bridge resizing window when using Batch Processing thru Photoshop.
-There are two boxes for sizing. If you put the same dimension in both does it just set the longest dimension to that size?
-What if I want say a 10x10 inch image at 72 DPI for web use as opposed to a 10 x10 inch image at 300 DPI for printing purposes, where does one enter that info?
Thanks,
JoshuaYou don't "resize" anything in Bridge, nor does it set PPI, pixels per inch—and most certainly NOT "DPI" (Dots [of ink] Per Inch) which is exclusively a feature of the printer.
Bridge is just a File Browser. It used to be called simply the Photoshop File Browser". It doesn't open, edit, manipulate resize or even save anything.
It merely hands the file(s) over to the appropriate application, whether that be Photoshop, adobe Camera Raw, Illustrator, InDesign or even MS Word.
You wrote:
-What if I want say a 10x10 inch image at 72 DPI for web use as opposed to a 10 x10 inch image at 300 DPI for printing purposes, where does one enter that info?
Again, you mean PPI in both instances there.
You enter that in whatever application you're sending the image from Bridge.
For instance in Photoshop: -
How do I set the Alpha when opening an Image Sequence?
I'm trying to imported a tiff image sequence w/embeded alpha into Final Cut Pro. Since Final Cut Pro has no feature for importing image sequences, I assume that Quicktime Pro is my only choice.
Here's what I've done so far:
1. Opened Image sequence in Quicktime Pro
2. Went to "show movie properties"
3. Selected "Video "Track" which is only track to select
4. Went to "Visual Settings" tab, "transparency"
5. Selected "straight alpha"
It turns the alpha or matte area into a solid white. I've tried the other transparency options but they always give me the white.
6. Import saved quicktime into FCP, edit into timeline, select different alpha settings, always white background.
Am I doing something wrong, or is my graphics guy giving me image sequences with improperly embeded alphas?
Avid will import the image sequence and read the alpha with no problem.In Final Cut (prefs) set the duration for still's
Import the still folder. Or make a bin folder in the bowser window...
Drop the still folder on the time line ....done
I just did a test and it works......... -
How should i set the baseURI when a db file path with a space
if the db file in a path like c:\program file\myapplication,then i set the baseURI dbxml:c:\program file\myapplication ,some exception occur~what should i do ?
thanks a lotThe Base URI needs to be a valid URI, which means it cannot include the Windows '\' character at all. In your case, you should be fine using something along the lines of "file:////C:/program file/myapplication"
(give or take a '/' or two -- I haven't tested this).
It's a common for BDB XML users to confuse the argument to create/openContainer() (a filesystem path) with the Base URI (a URI). The meanings and requirements are different. The best thing to do is to set and use a container alias (XmlContainer::addAlias()) to use in your queries.
Regards,
George -
I would like so send emails to multiple addresses yet I want each recipient to only see his or her address
This question isn't related to Mozilla Firefox. However, I can still answer your question. In the 'to' field, put your own e-mail address and put each recipient's address in the BCC field. This way the only address seen is your own.
Please try to post in the appropriate forum next time. (Thunderbird, Gmail, etc.) -
How can I set the date of my PC using Java?
Which class has the function to set system date and time.
Thanks in advance.but the following sentence
Process p=Runtime.getRuntime().exec("date
11-03-2002");
always throw IOExecption error
java.io.IOException: CreatePreocess:date 11-03-2002
error=0
and why?
How to settle it?
'date' is an internal command which means you need a shell to run it. Depending on the OS this will either be 'cmd' or 'command'. If you search the forums with the following keywords you will find examples on how to use this: "exec", "Runtime", "cmd" or "command" -
How can I set the foreground/background color after using CSPickColor()?
Hello all,
Is there any one who has experience on changing foreground or background color using Photoshop Plug-in SDK?
Currently I can get a returned color from CSPickColor(), but have no idea how to use it.
Thanks!You can try a linear-gradient that starts at gray 0% and ends at white <whatever the percentage the thumb is at>.
final Node track = slider.lookup(".track");
slider.valueProperty().addListener(new ChangeListener<Number>() {
public void changed(ObservableValue<? extends Number> ov, Number t, Number t1) {
double pct = (t1.doubleValue()-slider.getMin())/(slider.getMax()-slider.getMin())*100;
track.setStyle("-fx-background-color: linear-gradient(to right, gray, gray " + pct + "%, white" + pct + "%, white);");
});Edited by: dgrieve on Apr 12, 2012 12:19 PM -
TS1503 How can I reduce the amount of 'other' space used up on an iPhone 5?
I am almost at storage capacity on my iPhone 5. Almost 1/3 of my 16GB is taken up by the category 'Other'. I have read posts pertaining to this with solutions that are supposed to help by deleting all of my music. But I have also been advised not to try that. Any other suggestions or comments?
If you have read the countless posts answering this question, then you n=know that you need to restore the iphone. You can try from backup first. If that does not help, then restore as new.
-
How can I set the page that will open, when I open a new tab, to be the same as the homepage?
How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/ -
== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersThe text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142 -
How do I set the songs from itunes on my iphone 4s as ringtones? I shouldn't have to purchase ringtones when I have a whole music library on my iphone to choose from and songs that I have already purchased! I should not have to rebuy music!!
If anyone can help me on this that would be great! Thank you!My comment is the same as Dyson2003.
I am very disappointed, as I thought by purchasing a ringtone the set up would be easy - this I find to be extremely misleading. Before iPhone allows you to purchase a ringtone, they should make it very clear that to download a ringtone you will need the GarageBand programme in order to enable the ringtone to work.
I sent an email to the support team, in the hope that they would be able to advise me. I was basically referred to a telephone number for the country that I live in. In writing this email, when finished I think I am going to ask back for a refund.
In reading the above comments, I am even more annoyed because I've googled GarageBand only to see that theirs a cost of £2.99. I am so not impressed! -
How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?
After the discovery reported above, I filed this report :
Bug ID# 10073038
Summary:
When Numbers is used on a system with decimal comma a csv file may be good AND wrong
Steps to Reproduce:
With Numbers v2, you introduced an interesting enhancement.
In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
This said.
(1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
(2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
Expected Results:
Every normally constituted user assume that in
case (1) he will get a perfectly built table
case (2) he will get every cells of a row in a single cell
Actual Results:
In fact you forgot the drag and drop way of use and in
case (1) every values separated by semi-colon are inserted in a single cell
case (2) values separated by comma are correctly spread in a table
isn’t it ridiculous ?
Regression:
Except looking in QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
or
to replace the commas by TABs and the decimal periods by commas
Notes:
While I am on this subject, I wish to make two proposals:
(1) It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
Doing that, dates would be imported correctly in every countries.
At this time, on an English system, you export as mm/dd/year.
If the doc is open on a system using the format dd/mm/year, the results will be odd.
On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
(2) It would be fine to add the format Tab Separated Values in the Export pane.
TSV + ISO date format would give documents opening flawlessly everywhere.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
When writing emails the left hand margin is so close to the edge of the page that some characters disappear from view on the left hand of the page. How can I set the left hand margin to not be so close to the left edge of the page?
Oy. You beat your head for hours and finally concede to asking for help, only to solve it two minutes later. Here's the answer.
In the inspector, on the Layout tab, there's a checkbox that reads, "Show Thumbnail Track".
UNCHECK that box and the gutter goes away. -
When I open Safari, I always type command-plus to enlarge the view. However, I can't figure out how to permanently set the Safari screen to this view setting in the preferences. Any ideas?
Sorry, but you must Command + for every page. It's not permanent.
If you haven't tried yet, check out Zoom in Safari > Preferences > Accessibility
Maybe you are looking for
-
How do I remove an iPhone 4 that was turned in to Apple when I bought an iPhone 5 from Find My iPhone, when it will no longer be connected to the Internet? It is currently pending erasure
-
5 error while checking job status
Hi, We are getting the following error when we are trying to check the status of the process chain through FM 'RSPC_API_CHAIN_GET_STATUS': 5 error while checking job status. The real scenario is we are using an abap screen with a button on it. when t
-
Hello, our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well. ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI). Is it possible to use variant
-
Hi All , We have a Fp140 card reloaded due to the following error. plim_xge[242]: %PLATFORM-CIH-5-ASIC_ERROR : pla[0]: A parity error has occurred causing performance loss transient. 0x10440003 plim_xge[242]: %PLATFORM-CIH-5-ASIC_ERROR_HARD_RESET_ST
-
How to block someones call and sms on ma xperia z1?
I am getting spam calls and sms from one person, and I want to block that person from contacting me. How to block the calls and sms on xperia z1? I have the latest 4.4.4 update. Solved! Go to Solution.