How do I set the length of each clip?

I have just begun trying to build a video with Premiere Elements 10
I have created many videos with Windows Movie Maker..found it boring for Effects etc.that's why I have this new software.
Now my question is ..How do I  set the time for each clip?
I like to add a clip that goes with each lyric in the song.
Thanks.

Welcome to the forum.
As Steve points out, that is "editing."
One can use either of two Tools in PrE, to Trim the Clip to suit.
First, one can Dbl-click on the Clip in the Project Panel to open it in the Source Monitor, which looks a bit like the Program Monitor, but it has the In & Out Point settings. When that Clip has been Trimmed, as needed in the Source Monitor, just drag it to the Timeline.
Or, one can drag the Clip to the Timeline, and then click+drag on the Head of the Clip to set its In Point, and on the Tail, to set the Out Point.
Good luck,
Hunt

Similar Messages

  • How do I set the length of a podcast?

    How do I set the length of a podcast? I am using Garageband 3.0.2

    Drag the little purple left facing triangle at the top of the timeline to where you want the export to end.
    (Note, GB does impose a minimum length, but I dont' recall what that is at the moment)

  • HELP !!! How can I set the size of each component separately

    Please tell me, when adding components (a mix of
    labels , buttons etc.) on a container (swing), how can I set the size
    of each component separately.
    for example:
    the code here has a mix of button and a grid that is actually another JPanel. Its a part of a bigger
    program. When running the grid is cut (not seen in its full size).
    So, please try to anser also about the specific acse of frame contining another frame in it , and the interior should be right sized.
    The relevant part of the code:
    =========================================
    public class Reversi extends JFrame {
    public static void main(String[] args) {
    Reversi ourGame = new Reversi();
    public Reversi() {
    super("Grid Reversi");
    setSize(new Dimension(300, 300));
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    Grid g = new Grid(); // the grid was built at another part..
    ReversiGame ourGame = new ReversiGame();
    JButton b;
    JFrame f = new JFrame("Hello Java");
    f.setSize(new Dimension(300, 300));
    f.setDefaultCloseOperation(EXIT_ON_CLOSE);
    Container c = f.getContentPane();
    c.add(g,BorderLayout.NORTH );
    c.add(b = new JButton("Hola"), BorderLayout.CENTER);
    //f.pack();
    f.show();

    BorderLayout chooses the sizes of each of the components added to it. Choose a different layout manager (or set the placement/size manually with a 'null' layout)
    http://java.sun.com/developer/onlineTraining/GUI/AWTLayoutMgr/shortcourse.html

  • How can I reset the CTI for each clip to 00:00?

    I'm brand new to this - got Premier Elements 12 yesterday, so please bear with me.
    I have clips from a soccer game, each of which starts with 00:00. I have written notes about key scenes in each clip using the time that scene occurs in each clip. But when I add clips to the timeline, each clip's CTI begins at the point where the last clip's left off. So, say I wanted to get to a scene in clip 2 at 0:44. But clip 1, with a duration of 4:30, precedes clip 2 in the timeline . To get to the scene I was looking for in clip 2, I'd have to add the 4:30 from clip 1 to the 0:44 in clip 2 to find my scene in the timeline at 5:14 . Obviously, the problem only gets worse with each additional clip. And near impossible when I trim clips.
    One "workaround" I can use is to make a copy of the original clip in project assets, adjust the in and out points in the copy to get the scene I want, save/rename that scene and add it to the timeline instead of the original clip. Each scene would then be renamed and would show it's specific duration in the timeline. But that seems like a lot of work, to have to make copies of original clips in assets, trim them there and take them to the timeline. Back and forth, back and forth.
    Is there a way to keep the start and end times of each original clip when I add it to the timeline, so I can isolate each scene in that clip and trim out the unwanted portions without having to do math or spend time making and trimming copies? To be more succinct, Can I reset the CTI at the start of each clip to 00:00 within the timeline?
    I hope I've described my issue in a clear way that doesn't cause confusion. If not, please let me know what other questions you have or additional info you need to understand the issue I'm describing. Thanks, and sorry for the long post.

    mascott2300
    Please take a look at the blog post that I wrote about the gathering, assembling, organizing, and management of clips in a large project.
    ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
    See if any of the details work for you in your planned Premiere Elements projects.
    Also, from the point of view of leaving informational notes in the program, consider the "Comments" opportunities of the unnumbered markers when you place unnumbered markers in the Timeline.
    ATR Premiere Elements Troubleshooting: PE11: Forget Me Not Clip Details and Timeline Unnumbered Markers
    Please do not hesitate to ask questions or to ask for clarification on anything written.
    Thank you.
    ATR

  • Should be simple - how do I see the length of a clip?

    I know "clip" isn't the right word — I'm talking about any movable fragment of audio, be it a loop or something I recorded or whatever. What are these fragments called, and where can I see how long it is in seconds?

    The "clips" are called regions in GB - so much for nomenclature. The only way to determine the length is to switch the LED display to show real time (the clock symbol) and either to the math (subtract start time from end time) or move the region to the zero point briefly, read its length, and hit "undo" to put it back where it belongs.

  • How to I adjust the length of a track?

    New to Garage Band. Took a one to one session and I can't stop playing with the program. I created a song through the Magic Garage Band feature which I am trying to match up to a video. My video is about 4 minutes but the track I created is about 1:30. How do I set the length of the track?

    If the audio Regions of the Project only go as far as 1:30 you can extend each Region by looping them. This repeats the audio. Hold the cursor at the upper right corner of the Region until it changes to a loop, then drag out as far as you like.

  • How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English

    How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English
    == This happened ==
    Every time Firefox opened
    == From the beginning

    Some add-ons:
    Default FullZoom: https://addons.mozilla.org/en-US/firefox/addon/6965 (I use this one)
    No Squint: http://urandom.ca/nosquint/
    Also:
    http://support.mozilla.com/en-US/kb/Page+Zoom
    http://support.mozilla.com/en-US/kb/Text+Zoom
    http://kb.mozillazine.org/Browser.zoom.siteSpecific

  • Trying to create a book and have sorted 900 photos in manual order...the book application resorts my photos and i have to search 900 photos each time. how can i set the sorting

    trying to create an Aperture book and have sorted 900 photos in manual order...the book application resorts my photos and i have to search 900 photos each time to place a photo. how can i set the sorting to stay in my manual setup?

    1.  If you manually sort Images in a Project, and then create a new Book w. "Include selected Images" checked, your manual sort order will be preserved.
    2.  As a workaround for when you have already created a Book, batch rename your Images with a leading index or counter after setting the order manually.  You'll have to create a Naming Preset, e.g.: "{Index}_{Version Name}".  The renaming should go in the order that you selected the Images, so be sure to select the first one first, and then use "Edit→Select all" to extend the selection to all Images.  Once the Images are in your Book, a sort on Version Name should be the same as the manual sort you created.
    3.  At the risk of stating the obvious, you could create the Book, import the Images, and then sort them.  The Book -- it is, to Aperture, just a special kind of Album -- retains its own manual sort order.  I recommend using Albums this way.  Use Projects to cull and develop Images, and use Albums for output.  Sorting for a Book (or any output) is better done in the container devoted to that output (and not in the Project, which is more general).
    Message was edited by: Kirby Krieger -- added #3.

  • How to set the duration of each pic in a slideshow (and also how to pan and zoom)

    I have about 30 pictures I would like to add to a slide show.
    When I add them the duration for each picture is set to 6 seconds.
    I would like this changed to 4 seconds.
    But manually changing the duration of each individual picture, one by one, is a slow and tedious task.
    Is there a way of changing the duration of all my pictures at the same time, from 6 seconds to 4 seconds ?
    Or can I change a setting so that when I insert my pictures the duration is set to 4 seconds instead of 6 seconds ?
    As for the pan and zoom, I have seen the pan and zoom effect but this has a black border around the pictures as they zoom in and out.
    For example, when zooming in the picture starts small with a black border all round the edge.
    When zooming out the picture ends small with a black border all round the edge.
    Is there a way to pan and zoom starting with a full screen when zooming in, and ending with a full screen when zooming out ?
    Thereby not showing any ugly black borders.
    My Nokia N73 phone can do it !
    You can view the pictures as a slide show and when it pans and zooms it looks so much better because it does not show any black borders.
    The picture ALWAYS fills the screen even though it is panning and zooming.

    If you go to Edit/Preferences, you can set the default duration for each slide. This will affect only those photos you've imported into your project AFTER changing this preference.
    You should also turn off the preference for Scale to Frame Size, so your photos do not fill the screen. (And, for efficiency's sake, make sure your source photos are no larger than 1000x750 pixels, per the FAQs at the top of this forum.)
    You can also set the duration of each slide by selecting all of the stills you want to include on in your slideshow, right-clicking and selecting the Create Slideshow option.

  • How do I set the frame size

    I am Making a program for purchasing games, with the basic layout alsot done, except on problem. When the purchase button is pressed, a dialog shows up but nothing is seen until i resize it. How would i set the frame size so that i do not need to resize it each time? below is the code for the files. Many thanks in advance.
    CreditDialog
    import java.awt.*;
    import java.awt.event.*;
    class CreditDialog extends Dialog implements ActionListener { // Begin Class
         private Label creditLabel = new Label("Message space here",Label.RIGHT);
         private String creditMessage;
         private TextField remove = new TextField(20);
         private Button okButton = new Button("OK");
         public CreditDialog(Frame frameIn, String message) { // Begin Public
              super(frameIn); // call the constructor of dialog
              creditLabel.setText(message);
              add("North",creditLabel);
              add("Center",remove);
              add("South",okButton);
              okButton.addActionListener(this);
              setLocation(150,150); // set the location of the dialog box
              setVisible(true); // make the dialog box visible
         } // End Public
         public void actionPerformed(ActionEvent e) { // Begin actionPerformed
    //          dispose(); // close dialog box
         } // End actionPerformed
    } // End Class
    MobileGame
    import java.awt.*;
    import java.awt.event.*;
    class MobileGame extends Panel implements ActionListener { // Begin Class
         The Buttons, Labels, TextFields, TextArea 
         and Panels will be created first.         
         private int noOfGames;
    //     private GameList list;
         private Panel topPanel = new Panel();
         private Panel middlePanel = new Panel();
         private Panel bottomPanel = new Panel();
         private Label saleLabel = new Label ("Java Games For Sale",Label.RIGHT);
         private TextArea saleArea = new TextArea(7, 25);
         private Button addButton = new Button("Add to Basket");
         private TextField add = new TextField(3);
         private Label currentLabel = new Label ("Java Games For Sale",Label.RIGHT);
         private TextArea currentArea = new TextArea(3, 25);
         private Button removeButton = new Button("Remove from Basket");
         private TextField remove = new TextField(3);
         private Button purchaseButton = new Button("Purchase");
         private ObjectList gameList = new ObjectList(20);
         Frame parentFrame; //needed to associate with dialog
         All the above will be added to the interface 
         so that they are visible to the user.        
         public MobileGame (Frame frameIn) { // Begin Constructor
              parentFrame = frameIn;
              topPanel.add(saleLabel);
              topPanel.add(saleArea);
              topPanel.add(addButton);
              topPanel.add(add);
              middlePanel.add(currentLabel);
              middlePanel.add(currentArea);
              bottomPanel.add(removeButton);
              bottomPanel.add(remove);
              bottomPanel.add(purchaseButton);
              this.add("North", topPanel);
              this.add("Center", middlePanel);
              this.add("South", bottomPanel);
              addButton.addActionListener(this);
              removeButton.addActionListener(this);
              purchaseButton.addActionListener(this);
              The following line of code below is 
              needed inorder for the games to be  
              loaded into the SaleArea            
         } // End Constructor
         All the operations which will be performed are  
         going to be written below. This includes the    
         Add, Remove and Purchase.                       
         public void actionPerformed (ActionEvent e) { // Begin actionPerformed
         If the Add to Basket Button is pressed, a       
         suitable message will appear to say if the game 
         was successfully added or not. If not, an       
         ErrorDialog box will appear stateing the error. 
              if(e.getSource() == addButton) { // Begin Add to Basket
    //          GameFileHandler.readRecords(list);
                   try { // Begin Try
                        String gameEntered = add.getText();
                        if (gameEntered.length() == 0 ) {
                             new ErrorDialog (parentFrame,"Feild Blank");
                        } else if (Integer.parseInt(gameEntered)< 0
                                  || Integer.parseInt(gameEntered)>noOfGames) { // Begin Else If
                             new ErrorDialog (parentFrame,"Invalid Game Number");
                        } else { // Begin Else If
                             //ADD GAME
                        } // End Else
                   } catch (NumberFormatException num) { // Begin Catch
                        new ErrorDialog(parentFrame,"Please enter an Integer only");
                   } // End Catch
              } // End Add to Basket
         If the Remove From Basket Button is pressed, a  
         a suitable message will appear to say if the    
         removal was successful or not. If not, an       
         ErrorDialog box will appear stateing the error. 
         if(e.getSource() == removeButton) { // Begin Remove from Basket
              try { // Begin Try
                        String gameEntered = remove.getText();
                        if (gameEntered.length() == 0 ) {
                             new ErrorDialog (parentFrame,"Feild Blank");
                        } else if (Integer.parseInt(gameEntered)< 1
                                  || Integer.parseInt(gameEntered)>noOfGames) { // Begin Else If
                             new ErrorDialog (parentFrame,"Invalid Game Number");
                        } else { // Begin Else If
                             //ADD GAME CODE
                        } // End Else
                   } catch (NumberFormatException num) { // Begin Catch
                        new ErrorDialog(parentFrame,"Please enter an Integer only");
                   } // End Catch
              } // End Remove from Basket
         If the purchase button is pressed, the          
         following is executed. NOTE: nothing is done    
         when the ok button is pressed, the window       
         just closes.                                    
              if(e.getSource() == purchaseButton) { // Begin Purchase
                   String gameEntered = currentArea.getText();
                   if (gameEntered.length() == 0 ) {
                        new ErrorDialog (parentFrame,"Nothing to Purchase");
                   } else { // Begin Else If
                        new CreditDialog(parentFrame,"Cost � 00.00. Please enter Credit Card Number");
                   } // End Else               
              } // End Purchase
         } // End actionPerformed
    } // End Class
    RunMobileGame
    import java.awt.*;
    public class RunMobileGame { // Begin Class
         public static void main (String[] args) { // Begin Main
              EasyFrame frame = new EasyFrame();
              frame.setTitle("Game Purchase for 3G Mobile Phone");
              MobileGame purchase = new MobileGame(frame); //need frame for dialog
              frame.setSize(500,300); // sets frame size
              frame.setBackground(Color.lightGray); // sets frame colour
              frame.add(purchase); // adds frame
              frame.setVisible(true); // makes the frame visible
         } // End Main
    } // End Class
    EasyFrame
    import java.awt.*;
    import java.awt.event.*;
    public class EasyFrame extends Frame implements WindowListener {
    public EasyFrame()
    addWindowListener(this);
    public EasyFrame(String msg)
    super(msg);
    addWindowListener(this);
    public void windowClosing(WindowEvent e)
    dispose();
    public void windowDeactivated(WindowEvent e)
    public void windowActivated(WindowEvent e)
    public void windowDeiconified(WindowEvent e)
    public void windowIconified(WindowEvent e)
    public void windowClosed(WindowEvent e)
    System.exit(0);
    public void windowOpened(WindowEvent e)
    } // end EasyFrame class
    ObjectList
    class ObjectList
    private Object[] object ;
    private int total ;
    public ObjectList(int sizeIn)
    object = new Object[sizeIn];
    total = 0;
    public boolean add(Object objectIn)
    if(!isFull())
    object[total] = objectIn;
    total++;
    return true;
    else
    return false;
    public boolean isEmpty()
    if(total==0)
    return true;
    else
    return false;
    public boolean isFull()
    if(total==object.length)
    return true;
    else
    return false;
    public Object getObject(int i)
    return object[i-1];
    public int getTotal()
    return total;
    public boolean remove(int numberIn)
    // check that a valid index has been supplied
    if(numberIn >= 1 && numberIn <= total)
    {   // overwrite object by shifting following objects along
    for(int i = numberIn-1; i <= total-2; i++)
    object[i] = object[i+1];
    total--; // Decrement total number of objects
    return true;
    else // remove was unsuccessful
    return false;
    ErrorDialog
    import java.awt.*;
    import java.awt.event.*;
    class ErrorDialog extends Dialog implements ActionListener {
    private Label errorLabel = new Label("Message space here",Label.CENTER);
    private String errorMessage;
    private Button okButton = new Button("OK");
    public ErrorDialog(Frame frameIn, String message) {
    /* call the constructor of Dialog with the associated
    frame as a parameter */
    super(frameIn);
    // add the components to the Dialog
              errorLabel.setText(message);
              add("North",errorLabel);
    add("South",okButton);
    // add the ActionListener
    okButton.addActionListener(this);
    /* set the location of the dialogue window, relative to the top
    left-hand corner of the frame */
    setLocation(100,100);
    // use the pack method to automatically size the dialogue window
    pack();
    // make the dialogue visible
    setVisible(true);
    /* the actionPerformed method determines what happens
    when the okButton is pressed */
    public void actionPerformed(ActionEvent e) {
    dispose(); // no other possible action!
    } // end class
    I Know there are alot of files. Any help will be much appreciated. Once again, Many thanks in advance

    setSize (600, 200);orpack ();Kind regards,
      Levi
    PS:
        int i;
    parses to
    int i;
    , but
    [code]    int i;[code[i]]
    parses to
        int i;

  • How do I set the value of a dynamic row text field

    I have a repeated row form which contains a button and multiple text fields.  There is a text field (Input Data Field) further up with some information I want to place in the table and multiple buttons that I want to read the value of and set to the table.  I apologize there are multiple questions I have and I am using pseudocode to describe it.
    Top form looks like
    InputField
    | ButtonX1 | ButtonY1 | DescriptionX1 (read only Text Field)
    | ButtonXn | ButtonY1 | DescriptionXn
    OutputRow looks like
    | ButtonOutput | OutputField1 | OutputField2 | OutputField3 |
    So I would like it to do
    ButtonX1.click
    OutputTable.OutputRow.addInstance(true)  //this works - everything else I have questions on
    OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue
    Question 1
    How do I address the location in each table to set a value
    Question 2
    How do I get the value of the description field in the same table and row as the button
    I would like to say something to the effect of  OutputTable.OutputRow[??].OutputField1.rawValue = this.parent.DescriptionX
    OutputTable.OutputRow.OutputField2 = InputField.rawValue
      Same question as above - how do I specify a dynamic row - is this the proper syntax for getting the value from the input field?
    OutputTable.OutputRow.OutputField3 = this.ButtonLabel
    Question 3
      How can I get the value of the button's label to set in the field
      There should be very many of these buttons and buttons will be added - I would prefer to set the value based on the button's label to make the value easier - not requiring changing the code
    Question 4 - unrelated to those above.
    Is it possible to build the first table
    | ButtonX | ButtonY | Description |
    from an XML File.  I have seen examples of how to build if it is just data, but can the XML be pushed into a form with code to do the above actions?

    Each object in a form must have a unique name. I doing so it is not neccessarily the name but the path or SomExpression associated with that object that must be unique. In your case you have a Table.Row.object configuration. The Row is the part that is repeating so to give each object a unique name an instance number is placed on the repeating part. So objects in the 1st row woudl be Table.Row[0].object...objects in the second row woudl be Table.Row[1].object etc .....You can see this by adding a debug instruction on the Enter event of the description field. Put the code app.alert(this.somExpression) and when you enter the field you will see what the somExpression is. Do this for a few rows and you will see the pattern (don't forget to remove the debug code from the enter event). Now you know what you have to use to address the fields. If no instance is given it is assumed to be 0 ..that is why only the 1st row is being affected.
    So now to answer your questions:
    Question1: The square bracket notation is an issue for javascript (this is the notation for an array) so we have to use a different means of addressing the field to include the instance number. So to address the Description in the 3rd row we woudl use:
    xfa.resolveNode("Table.Row[2].Description").rawValue = "This is my new description";
    Note that the instance number is 2 for the 3rd row because the instance numbers are 0 based.
    Question2. The resolveNode notation allows you to pass a string so you can also concatinate expressions to make the string. If you are writing code on a button in the same row you can get the instance that you are on by using the expression this.parent.index. The "this" portion refers to the current object (the button) and the parent.index gets you th eindex of the Buttons parent. If the button is embedded deeper in a hierarchy then you can continue to add parent indicators until you get back to the node that you want. So rewriting your expression from Q1 it woudl be:
    xfa.resolveNode("Table.Row[" + this.parent.index + "].Description").rawValue = "This is my new description";
    Question3: The buttons caption can be retrieved by using ButtonName.caption.value.text.value
    Question4: When you say build from an XML file. What are you expecting to come from the XML file? The caption that goes on the button? Typically the XML file carries data (not to say that it cannot carry other things). Just need a bit of clarification on this one first.
    Hope that helps
    Paul

  • How do I set the placementID of portlet at runtime?

    Hi,
    I want to know the position of portlets on the page.
    Below is my requirement,
    I have 2 column layout on my page and each column has 3 different portlets. So when the first time it loads page load the page user see some portlets on each column, when user revisit that page I have to change the position of portlets in short I can say I have to shuffle the portlets at run time.
    Approach which I have decided and in which I require more help is like,
    Whenever user visit the page Backing file which run and it is store positions of portlets I am able to get position of portlet using following code,
    portletbc = deskbc.getPortletBackingContextRecursive("PORTLET_INSTANCE");
    String placeID = portletbc.getPlacementId();
    This I store in DB so whenever user revisit or refresh the page from the backing file I read the DB and if placementID of the portlet is same then I shuffle placementID. So here comes the problem or I require help...
    How do I set the placementID as I am not able to find out way to do it. So, can you please let me know how to set portlets placementID.
    Thanks in advance.
    HJ

    Check out the movePortlet method on PortalCustomizationManager:
    [http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/javadoc/com/bea/netuix/application/manager/persistence/PortalCustomizationManager.html]

  • How can I set the default line height?

    Greetings,
    I have a report that displays observed behavior in a list format like the one below:
    Behavior Observed:   
        Withdrawn           
        Happy
        Sad
        angry
    There are 5 responses as to the severity of the behavior or it is left blank if the behavior was within normal limits.
    So the output would look like this:  
    Behavior Observed:   
        Withdrawn            (mild)
        Happy
        Sad                      (moderate)
        angry
    The problem is that when this report was designed the details sections were not uniformy formatted and the spacing between data elements is hard to follow from the label to the data field.  I tried to set the details to be uniform by selecting "Arrange Lines",  however when I do this, the data is displayed too close horizontally.  So my question is how do I set the default line height for each field so that they are uniform in distance from each other but not too close due to the font height?
    Does this make sense?
    Thank you,
    Kevin

    I'm confused... How are you associating line height with horizontal field spacing???
    If you have this...
    Behavior Observed:     Severity:
    Withdrawn          (mild)
    Happy
    Sad               (moderate)
    angry
    But want it to look like this...
    Behavior Observed:
    Withdrawn (mild)
    Happy
    Sad (moderate)
    angry
    all you have to do is create a concatenation formula. Something like this...
    {TableName.BehaviorObserved} & " (" & {TableName.Severity} &")"
    Sorry if I've misunderstood what you are trying to do.
    Jason

  • Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    I have various formatting issues:
    a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
    b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
    c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
    d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
    == This happened
    ==
    Every time Firefox opened
    == Ever since I started using Firefox (a few months ago)
    ==
    '''Troubleshooting information'''
    I didn't find any results
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows 7
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-nphpclipbook
    *Office Plugin for Netscape Navigator
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *Default Plug-in
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *NPRuntime Script Plug-in Library for Java(TM) Deploy
    *The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
    *Shockwave Flash 10.0 r45
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *iTunes Detector Plug-in
    *3.0.40624.0
    *NPWLPG
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

    The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
    You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
    Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
    Check the tooltip of each button by hovering with the mouse over each button.
    Make Link - https://addons.mozilla.org/firefox/addon/142

  • How do you set the font color for a specific entire row inside a JTable?

    How do you set the font color for a specific entire row inside a JTable?
    I want to change the font color for only a couple of rows inside a JTable.
    I've seen some ways to possibly do this with an individual cell.
    Clarification on changing the font color in an individual cell would be helpful too if
    there is no easy way to do this for a row.

    hai,
    Try out with this piece of code.Create your table and assign the renderer to each column in the table.
    CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
    for(int i=0;i<your_JTable.getColumnCount();i++)
    your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
    class CellColorRenderer extends JLabel implements TableCellRenderer
    CellColorRenderer()     
    setOpaque(true);     
    setHorizontalAlignment(LEFT);
    setVerticalAlignment(CENTER);
    setBackground(Color.white);
    setForeground(Color.black);
    protected void setValue(Object value)
         setText((value == null) ? "" : value.toString());
    public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
         if(isSelected == true)
              setForeground(Color.red);
         else
              setForeground(Color.black);
         setValue(value);
         return this;
    regards,
    bala

Maybe you are looking for

  • Open a pop up from JJT framework

    Hi I have a requirement to open a pop up from JTT framework I have made one Order Details page in OA framework In this page,when you click on one link, it opens a one popup and it works a modal window. There are many ways to come to this page When we

  • Remove back image while exporting to PDF (InDesign CS4)??

    Hi All, I have two images in my InDesign CS4 file and one image is hiding behind my second image. When I am exporting my InDesign file as Pdf and opening in Acrobat, Acrobat showing bottom image first and then showing my top image. Is there any way t

  • Trackpad Not Working Even After Replacement

    About 3 months ago, I spilled water all over my T510.  Everything worked afterwards, except for the trackpad and fingerprint reader.  The trackpad was not even seen in BIOS.  The fingerprint reader lit up, and I could turn on the laptop by sliding my

  • How to save a website using firefox.

    webpage complete is a bunch of different files and all files does not include photos. I am trying to save my site rangeoflight.net Thank You.

  • Waiting all threads in a fixed thread pool

    Hello, may I know how can I wait for all the threads in a fixed thread pool to be completed, without calling shutdownNow? Executor pool = Executors.newFixedThreadPool(nThreads); for(int i = 0; i < 10000;  i++)     pool.execute(new StockHistoryRunnabl