How do I set up 2 17" cinema displays to my G5?

I've got an early G5 with a Nvidia G Force FX 5200 card. I have my original 17" cinema display on the card and have purchased a second one which I'd like to add to the card, so I'm working with two displays. Could anyone please tell me what kind of adapter I would need to do this?
Thanks.
1.6 GHz PowerPC G5 Mac OS X (10.4.9)

To get full resolution on a 30" display from a Mini DisplayPort, you need a DUAL-LINK DVI adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

Similar Messages

How do I set up dual 30" cinema displays on a 2x2.4 GHz Quad Core Intel Xeon Mac?

I have this amazing apple mac pro. However, I also have two amazing fully functional 30" cinema hd displays. for some reason, when I have both displays mounted to the mac pro, one display is at the entirely wrong display setting (too large) and the other is set perfectly. Is there something I should know about when setting up? I've gone through all the configs within prefences>displays as well. even switched ports on the tower to check that it wasn't the display and it's the same. seems to be what the card is sending out the two ports. one port is dvi the other is mini. any help would be greatly appreciated as I'm trying to utilize two monitor set up in fcp.
Thanks,
Mark

To get full resolution on a 30" display from a Mini DisplayPort, you need a DUAL-LINK DVI adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

How can I run a 27" Apple Cinema Display and another monitor from my MacBook Pro?

Hi everyone,
I recently purchased a brand new 15" MacBook Pro to replace my old one. I was told when ordering it that I would be able to hook up two external monitors to it using the Matrox DualHead2Go hardware. So, I also bought a 27" Cinema Display (non-Thunderbolt since it wouldn't work with the DH2Go). However, when I contacted Matrox they said their products don't support screens as large as the 27" ACD.
Bummer!
So, my question is: does anyone know how I can hookup a 27" Apple Cinema Display at 2560x1440 and a Acer 22" monitor at 1685x1050 (or, anything less really) to my new MacBook Pro?
I've looked around and haven't been able to find a good answer.
Thanks for your help!

Will something like this work? A USB to VGA adapter? Can I use this at the same time that I have a Cinema Display plugged into the Mini-DVI port and will they both work at the same time? Anyone know?
http://www.amazon.com/StarTech-Monitor-External-Adapter-USB2VGAE2/dp/B002FJQXXC/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1329870330&sr=1-2

Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art?

Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art? I've checked the User manual and that doesn't help.

Why don't you, instead of taking time to do that, just backup, and then restore your iPod?
Just a suggestion..

How do I set up an indicator to display for only 1 second?

How do I set up an indicator to display for only 1 second?
I am reading keys from a serial device and I turn on an indicator that corresponds to the key pressed
on the serial device but how do I set this up so that it only stays lit (enabled) for a second or two?
The indicator is inside of a case statement and turns on OK but I do not want it to stay on for more than
a second or two. How do I modify this to display for only a second or two?
(P.S. I am running an old version 8.2 and can only see vis that are 8.2 or older.)
thanks

Simplest way to turn the indicator off (false value) after a set time is to use a Sequence structure (flat or stacked).
Frame 1, set to true,
Frame 2, Wait ms (wire millisecond value to wait)
Frame 3, set to false.
This method, however, prevents the code outside the case structure from running during that wait time.
Something more elaborate will allow the external code to run. What comes to mind is a shift register that holds the indicator name and the time stamp (in milliseconds) when it was turned on, in an array of clusters. Each iteration of your loop will check this register to see if a certain time has passed (current time stamp minus turn on time). If so, use a case structure to turn the indicator off and remove the elements from the shift register array (so you don't keep setting the indicator to false). The array will let you control multiple indicators independently.
A problem with this option could arise from multiple readings. Lets say you want to turn it off after 2 seconds, but you read the value again after 1 second (this means the indicator should be on for a total of 3). The code would still turn it off after the 2 second mark. Of course this really depends on the time intervals involved with your code.

HT1752 Where can i find a replacement set of cables for cinema display 23 inch early 2007. I will solder them.

I have an old vintage cinema display and would like to replace the power supply and the set of cables in the back (early 2007). Where can I found it?

Hi-
You say missing? How about cut....... The cable coming from the back of the ACD isn't removable. Your "deal" needs to go to an Apple service center. You can also get a power brick there.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

How to connect a new 27" LED Cinema Display to an older Mac Mini?

I bought a 27" LED Cinema Display (no Thunderbolt) but don't know how to connect it to my wife's older Mac Mini. I presume the Atlona adaptor is the solution, but I haven't bougt one yet.
robbert keegel

The cord attached to the display splits into a Mini DisplayPort, USB, and a MagSafe connector (for powering a laptop).
There is a separate connector on the back of the display for the AC power cord.
<http://store.storeimages.cdn-apple.com/2316/as-images.apple.com/is/image/AppleIn c/MC007_AV1?wid=326&hei=326&fmt=jpeg&qlt=95&op_sharpen=0&resMode=bicub&op_usm=0. 5,0.5,0,0&iccEmbed=0&layer=comp>
<http://store.apple.com/us/product/MC007LL/A>
"What’s in the Box
LED Cinema Display
AC power cord
Printed documentation"

How to deal with hum/interference - 30in Cinema display?

Hi, I hope someone can help with this!
I have a 30inch Cinema display, which has started to create a hum through my powered speakers (Genelec 8040's). I have tried plugging the (mains powered) speakers into a separate mains socket, moving them about, as far as is practical, and even sticking a sheet of tinfoil between the back of them , but no luck.
The hum comes on at very low volume levels, and is persistent, i.e. if I am playing a track in iTunes, and there is a quite bit in the song, I get 'errrrrrrrrrrrrrrrrrrrrrrrrrrrrrr' in the background.
Now the weird thing is that I was playing a game, and for some reason there was no hum, which suggests it may be fixable via software/settings?
I'm a bit of a newbie at this stuff (as the tinfoil experement, may suggest!), so I'd really appreciate any advice!
TIA,
Steve

Thanks for the feedback. I thought it was the monitor, as the hum is only present when it is on. It may be a combination of the Mac Pro & the monitor though... Mmmmm...
I think I may have fixed it, well improved the situation, I'll say what I did in case anybody else has the same issue, or has a better fix.
I tried unplugging the mini jack audio out, which goes from the mac, to a mixing desk, to the powered Genelec audio monitors. When I did this the hum stopped, which I think means that the issue is a poorly shielded mini jack to phono cable, as if it was direct interference from the monitor to the speakers, it should (in theory) be present regardless of whether the audio is connected into the mac or not.
I have moved the cable about, and the hum is reduced, so I think I have found the problem.
Hopefully this will be of use if anybody else has the same issue!

How do I set MacBook to an external display when the plug and play doesn't recognize it? I am trying to set my Samsung 530 LCD as a monitor but HDMI and VGA cords (and the adaptor for them) doesn't seem to work.

I have tried everything I can find on line but they all claim that the plug and play works, and they don't for me. I tried the mini dvi to HDMI and a HDMI cord and that was not recognized no matter which unit I rebooted first. I found someone who said that my Macbook might be too old for the HDMI technology so I returned the cords and went to the VGA cord and adaptor.
I tried this first with the HDMI setup:
http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 167919&modelname=LN40C650L1F&modelcode=&session_id=NDhJrD0DQT0Z8KRsm62yhxJxqnyPy SKhlhpB8vQ6h9Q7R2BZJGzj!-1089109758!1761676444!7501!-1!434477884!1761676348!7501 !-1!1292098185857
Then I tried this with the VGA setup:
http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 167901&modelname=LN40C650L1F&modelcode=&session_id=NDhJrD0DQT0Z8KRsm62yhxJxqnyPy SKhlhpB8vQ6h9Q7R2BZJGzj!-1089109758!1761676444!7501!-1!434477884!1761676348!7501 !-1!1292098185857
I contacted Samsung support and they said I needed to set the display settings to external display on the mac. I went to the display settings and moved the icon to my status bar. When I click on search for displays or whatever it says (I'm not at my Mac right now) it does nothing.
What am I missing?

I am using MAC OSx 10.5.8 (9L31a) as my operation system. The TV says "No signal. Check connected device's power, cable connection and source selection." Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display. But how do I do that?

How do I set up the multiple scree display so I can use more than one doc at a time

With the old operating system I was able to swipe to the upper left hand corner and 9 screens would appear. When working on a research paper I was able to move docs to each screen to help organize. With this Op System it seems to have gone away. Is there a way to set it up again?
Pat

Apple implemented major changes with working in multiple spaces from the version you were using in 10.6 Snow Leopard. (This first version was in 10.7 and has developed further till now.)
To avoid a very long description post, search 'Work in multiple spaces' in the Help menu for details on how to use the new spaces in Mission Control.

How do I set up my app to display its name in Chinese?

Within my app-descriptor.xml
<name>
        <text xml:lang="en">Appname</text>
        <text xml:lang="es">ESAppname</text>
        <text xml:lang="ch">背痛</text>
        <text xml:lang="zh_CN">背痛</text>
        <text xml:lang="zh_TW">背痛</text>
    </name>
When the iPhone language is set to English, or Spanish, the app name is displayed correctly, but for Chinese Simplifled it reverts back to displaying the English name.
Would anyone know how to achieve this?
Using AIR 16 as 17 currently has bug issues for me.
Thanks,
Mark

Thanks for replying Chris.
Unfortunately though that had no affect but when reading your post I did spot another post which seems to work.
<text xml:lang="zh_Hans">背痛</text>

How can I set bind parameter as Default Display Value in JHeadstart

Hi,
I am using -
JDeveloper Studio Edition Version 10.1.3.1.0.3984
JHeadstart Release 10.1.3.1.26
Can anybody help me for the following:
I am using a super class of ViewObjectImpl where I am definning a bind parameter (Student ID) using login userid:
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
Then I defined p_std_id in Bind Variables tab in VO Editor and used that in Where clause in the SQL Statement tab.
This is working fine.
Now what I want to do is:
I want to put the value of p_std_id as Default Display Value for a field.
Can anybody let me know how I can put the value of p_std_id in JHeadstart Application Definition?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hi Jan and Steven,
Thanks for your reply.
I need to show the default value in the table layout.
Steven, could you please give some more hints about EL Expression?
To obtain the value of p_std_id now and pass it on as bind param, I am using a class extending ViewObjectImpl. Inside that class I am using the following method:
I'd appreciate if you could help for the EL Expression.
Thanks
protected void executeQueryForCollection(Object Object, Object[] bindParams,
int i) {
String userId = ((ApplicationModuleImpl)getApplicationModule()).getUserPrincipalName();
try{
getLdapInfo(userId);
catch(Exception e) {
sLog.debug("executeQueryForCollection: Userid = " + userId);
if (bindParams != null)
for (int j = 0; j < bindParams.length; j++)
Object[] bindParam = (Object[])bindParams[j];
if ("p_user_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_user_id, setting value to " + userId);
bindParam[1] = userId;
if ("p_emp_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_emp_id, setting value to " + employeeNumber_from_LDAP);
bindParam[1] = employeeNumber_from_LDAP;
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
super.executeQueryForCollection(Object, bindParams, i);
Thanks
Syed

How do I set Column Width in table displayed - have tried everything :-(

Hi,
I'm using Jdev 10.1.2, adf bc and jsp's.
Simple problem, driving me nuts. In my app i display a number of different view objects in a number of jsp's. i want to set the width of the columns so that the info (if large) in each field will stay on one line. i.e. it wont continue onto the next line and take up two rows.
i have tried setting the width property of the <th> & <td>, setting the disply width property in the entity object editor and the view object editor, nothing makes a bit of difference to how the column is displayed.
this results in the tables looking messy and squised, which is totally unsatisfactory.
so if anyone could shed any light on the subject, i would be most grateful.
Thanks in advance......

hi Newbe,
if you set the option noWrap="true" on the column the text will not be wrapped;
<af:column noWrap="true" sortable="false" headerText="col5">
<af:outputText value="#{row.col5}"/>
</af:column>
Good luck
Luc Bors

How can I set up Apple Mail to display the sender's "from icon" in the header info?

Hi,
I have gone into the preferences to set up custom headers, so that the icon sent to me from the email sender will display in the header, but do not see an option for this. I want to do this for Comcast as a source specifically, as they embed an icon in their official emails and I have been receiving phishing emails from sender pretending to be Comcast. Comcast states on their website, that you can see their icon in any mail they send, however, this does not happen on my version of Apple Mail (4.5).
Here is an image of the info shown on the Comcast website, in case that helps to clarify my question.
Thanks,
Kim

On the Internet Accounts System prefs choose Add Other account…
Pick Mail account.
On the first page where you enter username and password, hold down the Option key and the Create button will change to Next. Click that with Option held down.
You can then manually create the account.

How can I connect my 30" HD Cinema Display to my XBox 360?

Indeed, I presently own an old '30" Apple Cinema HD Display with Aluminum Enclosure,' in which I typically connect to my 15" Macbook Pro via a 'Mini DisplayPort to Dual-Link DVI Adapter'. I presently use it for my CG Design work and often for streaming movies online, but the big question now is: Can I connect my display to my XBox360?
I've done a bit of digging already, and I've found a good amount of information regarding connecting my XBox to my Mac, so as to further run it through a window on my screen. Thing is, I don't want to connect it to my Mac to run it through my screen, I want to connect it to my screen!
So, anyone? Anyone at all?
Thanks,
KaT

I think (not sure since I don't have a UPS) it depends on the UPS and what the form of the power wave is (full sine wave, etc.).

How do I set up 2 17" cinema displays to my G5?

Similar Messages

Maybe you are looking for