How do I set up directory alias in Tomcat 4.0.3?

Hello!
Let's say I want to map http://my.ip.address/photos
to the folder c:\my documents\photos on my hard drive.
How do I tell Tomcat that I want make this mapping?
Thank you in advance.

I can't remember the exact syntax, but you do it using the <context> tag in the Server.xml file. Look for the server.xml file in the "conf" or "bin" directory. Try doing a google search on the context tag and you should get an example.

Similar Messages

How do i set up an alias email address in entourage?

How do I set up an alias .mac email address in entourage? I set it up the same as my master .mac email address, but it is not working.

There are a couple of ways of doing this. The easiest is probably to just add the secondary address in the Mail.app -> Preferences -> Accounts field.
The specifics of which vary a little based on the OS/Mail.app version you're running, but in Yosemite:
Mail -> Preferences -> Accounts
Select your iCloud account and change the 'Alias' popup menu from your iCloud address to 'custom'.
Doing this enables the 'Email Address' field. In this field you can enter the email address you want to appear in your From header.
If you want to use multiple addresses (e.g. your iCloud address and your other alias), you can enter a comma-separated list of addresses - e.g. '[email protected], [email protected]' and then you'll have a pop-up menu on each new message where you can choose the address to use for each outgoing message. You can also set the default address in Preferences -> Composing -> Send new messages from:

How do I set Home Directory in media browser?

I've tried everything.
How can I chose what directory wiill be my "Home Directory" in the media browser portion of my CS5 Prem Pro? I want to change it from the directory that it goes to when you click on Home Directory.
Assistance will be appreciated.

On a Mac fonts are set at Appearance in Preferences (Options)

How do I set up an alias for iCloud?

First I'd like a quick list of steps on how to set up an iCloud alias on the PC (Windows 7).
And second, can someone tell me what an alias is? Because in other forums all I've learned about it is that it is almost an alternate email address, which in fact it's the same address as the primary address. But not... So if someone could clean up that confusion before I start making alias's galore!
Thanks!

This explains how to create an alias on iCloud.com: http://help.apple.com/icloud/#/mm6b1a490a. An alias address is an alternative email address that will receive email in your existing iCloud email inbox. They can be suspended or deleted later. Just be aware that you can't later use it to create another iCloud account or move it to another account.

How do I set up an alias email with Mac Mail, so that my alias shows up when I send email from my Mac Mail account?

I am have an email forwarding service, not an email account, which I want to set up as an alias for Mac Mail so that my email appears in the "from" address when I send messages from Mac Mail. I'm having trouble figuring out what I need to do to set up this configuration. Thanks so much for your help!

There are a couple of ways of doing this. The easiest is probably to just add the secondary address in the Mail.app -> Preferences -> Accounts field.
The specifics of which vary a little based on the OS/Mail.app version you're running, but in Yosemite:
Mail -> Preferences -> Accounts
Select your iCloud account and change the 'Alias' popup menu from your iCloud address to 'custom'.
Doing this enables the 'Email Address' field. In this field you can enter the email address you want to appear in your From header.
If you want to use multiple addresses (e.g. your iCloud address and your other alias), you can enter a comma-separated list of addresses - e.g. '[email protected], [email protected]' and then you'll have a pop-up menu on each new message where you can choose the address to use for each outgoing message. You can also set the default address in Preferences -> Composing -> Send new messages from:

How can i specify current directory path of wsusscn2.cab

SCRIPT:
How can i set current directory file path of wsusscn2.cab where i placed this vbscript, instead of going to c:\wsusscn2.cab.
=======================================================================
Dim fso
Set wshNetwork = CreateObject("WScript.Network")
strUser = wshNetwork.Username
Set fso = WScript.CreateObject("Scripting.Filesystemobject")
Set f = fso.CreateTextFile(".\Missing Patch Details\" & wshNetwork.ComputerName & "_missing_patches.csv", 2)
Set UpdateSession = CreateObject("Microsoft.Update.Session")
Set UpdateServiceManager = CreateObject("Microsoft.Update.ServiceManager")
Set UpdateService = UpdateServiceManager.AddScanPackageService("Offline Sync Service", "c:\wsusscn2.cab")
Set UpdateSearcher = UpdateSession.CreateUpdateSearcher()
WScript.Echo "Searching for updates..." & vbCRLF
UpdateSearcher.ServerSelection = 3 ' ssOthers
UpdateSearcher.ServiceID = UpdateService.ServiceID
Set SearchResult = UpdateSearcher.Search("IsInstalled=0")
Set Updates = SearchResult.Updates
If searchResult.Updates.Count = 0 Then
WScript.Echo "There are no applicable updates."
WScript.Quit
End If
WScript.Echo "List of applicable items on the machine when using wssuscan.cab:" & vbCRLF
For I = 0 to searchResult.Updates.Count-1
Set update = searchResult.Updates.Item(I)
f.WriteLine update.Title
'WScript.Echo I + 1 & "> " & update.Title
Next
WScript.Quit
==========================================================================
prakash

Just remove the c:\ and it will be looked for in the current directory.
If you want the script how get the script path and remove the file name or use the shell
currentFolder = CreateObject("WScript.Shell").CurrentDirectory
¯\_(ツ)_/¯

I've had a hard drive crash and put in a new one. However iTunes has or list all of them from my old drive. How do we re-set the directory

I've had a hard drive crash and put in a new one. However iTunes has or list all of them from my old drive. How do we re-set the directory?

You can re-download the software from Download CS5.5 products
Install and enter your serial number when prompted.
Find your serial number quickly

How to use directory alias in Java stored procedure ?

hi everyone !
I want use Directory alias in Java strored procedure
I 'hv created dir alias as
Create Directory BFILE_DIR AS 'C:\MyImages'
my java statements -
myfile="C:\MyImages\myPH01.jpg"
File binaryFile = new File(myFile);
instead of giving absolute path I want give directory alias BFILE_DIR
myfile= BFILE_DIR + "myPH01.jpg"
File binaryFile = new File(myFile);
can anyone pl suugest how should I write this in Java procedure
thanks
SPD

hi everyone !
I want use Directory alias in Java strored procedure
I 'hv created dir alias as
Create Directory BFILE_DIR AS 'C:\MyImages'
my java statements -
myfile="C:\MyImages\myPH01.jpg"
File binaryFile = new File(myFile);
instead of giving absolute path I want give directory alias BFILE_DIR
myfile= BFILE_DIR + "myPH01.jpg"
File binaryFile = new File(myFile);
can anyone pl suugest how should I write this in Java procedure
thanks
SPD

How to set default directory for SQL LOADER

hi all,
i wanted to know how can we setup a default directory for SQL LOADER if at all we can. i connot place my control and data files in local system and use them at command prompt. rather i wanted to know if we can set default directory that the loader can use. this requirement is basically to enable all the clients to upload the data placed on the server and use the loader utility.
thanks in advance,
Basavraj

Ella,
You don't say which version of SQL Developer you are using via Citrix, but just setting the SQLDEVELOPER_USER_DIR hasn't worked for a long time (see Re: SQLDEVELOPER_USER_DIR does not function anymore). Also, since version 1.5, the default for the user directory (now set via ide.user.dir as shown below) is under the user profile area (relative to %APPDATA%), which you should be able to write to, even on Citrix.
Assuming that neither of those help, you will need to get whoever installed SQL Developer on the Citrix C: drive to modify the sqldeveloper.conf to have a line like, where the path exists for everyone who will be using the shared SQL Developer (assumes everyone has a H: drive):
AddVMOption -Dide.user.dir=H:\sqldeveloperAn alternative (depending on how you start SQL Developer via Citrix), is to create your own shortcut to start SQL Developer with something like:
sqldeveloper -J-Dide.user.dir="%SQLDEVELOPER_USER_DIR%"theFurryOne

CS3 WIN How to set starting directory in SDKFolderChooser() ?

Hello?
I would like to choose folder.
But I don't know how to set start directory.
/////// sample source //////
SDKFolderChooser chooser = SDKFolderChooser();
chooser.SetTitle(PMString("select folder"));
chooser.ShowDialog();
if (chooser.IsChosen()) {
Thank you.

byung-wan Jung, You can create a new version of the SDKFolderChooser::ShowDialog() method to get what you want. You will find the source code for SDKFolderChooser in the SDK. It's located in the following path: <ID CS3 SDK>/source/sdksamples/common/SDKFileHelper.cpp Create a new version of the SDKFolderChooser::ShowDialog() method, one where you can pass in a starting folder that can be passed into the DoDialog() call made inside the ShowDialog() method. In the current version, nil is being passed to DoDialog() for the starting folder location. I hope this helps! -- Jim

Defining directory alias weblogic http

hi all
 I think I have asked this question twice before and I have received feedback
 from other developers that they want to know the answer as well. However I
 haven't gotten any answer from weblogic yet. so PLEASE weblogic support, say
 at least yes or no.
 We want to define directory alias in weblogic (with 3.1.8). Exactly the same
 as in MS IIS directory alias or virtual directory. In the other words, we
 want a path in http URL points to somewhere in the local system, such as
 http://localhost/download -> c:\download_area\
 http://localhost/upload -> d:\upload_area\
 http://localhost/update/games -> e:\games_upload\
 etc...
 What I learn from weblogic documentation is that all files must under one
 root, i.e. the weblogic.httpd.documentRoot=c:/weblogic/
 It mentions the use of FileServlet, but I found it is useless. what is the
 point for doing
 weblogic.httpd.register.download=weblogic.servlet.FileServlet
 weblogic.httpd.register.upload=weblogic.servlet.FileServlet
 if "download" and "upload" pointed to the same local directory!?
 So, my questions is: Can directory alias be implemented in Weblogic 3.1.8?
 If not, how about weblogic 4.0?
 If still not, is there any work around or alternative solutions? How about
 if we are willing to do some minimual coding to get it to work?
 Thanks
 Ben
 p.s. if there is an answer exist to this question, please point me to there.
 thanks
 p.p.s. i can't give up this question because (1) it is important to us, we
 don't want to run weblogic and IIS at the same time (2) I can't believe
 weblogic can't do this. I think it is just missing in the documentation. It
 is such a basic feature in ANY web server


Ben,
 docHome may be deprecated, but it still should work for you. It does for me.
 -rrc
 Ben Hui wrote:
 > Mark,
 >
 > Thanks for the reply, but it doesn't work. We are using weblogic 3.1.8 here
 > and I got the following message
 >
 > Wed Sep 22 16:15:59 EDT 1999: <HTTP-Servlets>
 > weblogic.servlet.FileServlet: init
 > Wed Sep 22 16:15:59 EDT 1999: <HTTP-Servlets>
 > weblogic.servlet.FileServlet: docHome parameter deprecated, check
 > documentation for alternative
 >
 > I checked weblogic documentation, and it says
 >
 > ---
 > weblogic.servlet.FileServlet serves standard HTML files and other MIME
 > resources located in the document root. Note that this registration has
 > changed: There is now only one initArg for this servlet, defaultFilename.
 > The initArg dochome has been superseded by the more flexible document root
 > property. Although dochome is still supported for backwards compatibility,
 > if document root is set, the dochome argument will be ignored. If the
 > requested file isn't found, FileServlet serves the file set as the
 > defaultFilename.
 > ---
 >
 > So I remove all definitions of documentRoot and try it again. It still
 > doesn't work. I tried to replace 'docHome' with 'dochome' and
 > 'documentRoot', it gave me NullPointerException... any ideas?
 >
 > Thanks
 >
 > Ben
 >
 > Mark Griffith <[email protected]> wrote in message
 > news:[email protected]...
 > > Ok here is your answer. NO.
 > >
 > > Just kidding. :)
 > >
 > > The FileServlet has an additional init arg docHome.
 > >
 > > Thus you can do:
 > >
 > > weblogic.httpd.register.download_area=weblogic.servlet.FileServlet
 > > weblogic.httpd.initArgs.download_area=docHome=c:\download_area\
 > >
 > > weblogic.httpd.register.upload_area=weblogic.servlet.FileServlet
 > > weblogic.httpd.initArgs.upload_area=docHome=d:\upload_area\
 > >
 > > weblogic.httpd.register.games_upload=weblogic.servlet.FileServlet
 > > weblogic.httpd.initArgs.games_upload=docHome=e:\games_upload\
 > >
 > > This is not as elegant as it should be as this creates four instances of
 > the
 > > FileServlet (including the default registration).
 > >
 > > Cheers
 > > Mark G.
 > >
 > > Ben Hui wrote:
 > >
 > > > hi all
 > > >
 > > > I think I have asked this question twice before and I have received
 > feedback
 > > > from other developers that they want to know the answer as well. However
 > I
 > > > haven't gotten any answer from weblogic yet. so PLEASE weblogic support,
 > say
 > > > at least yes or no.
 > > >
 > > > We want to define directory alias in weblogic (with 3.1.8). Exactly the
 > same
 > > > as in MS IIS directory alias or virtual directory. In the other words,
 > we
 > > > want a path in http URL points to somewhere in the local system, such as
 > > >
 > > > http://localhost/download -> c:\download_area\
 > > > http://localhost/upload -> d:\upload_area\
 > > > http://localhost/update/games -> e:\games_upload\
 > > > etc...
 > > >
 > > > What I learn from weblogic documentation is that all files must under
 > one
 > > > root, i.e. the weblogic.httpd.documentRoot=c:/weblogic/
 > > > It mentions the use of FileServlet, but I found it is useless. what is
 > the
 > > > point for doing
 > > >
 > > > weblogic.httpd.register.download=weblogic.servlet.FileServlet
 > > > weblogic.httpd.register.upload=weblogic.servlet.FileServlet
 > > >
 > > > if "download" and "upload" pointed to the same local directory!?
 > > >
 > > > So, my questions is: Can directory alias be implemented in Weblogic
 > 3.1.8?
 > > > If not, how about weblogic 4.0?
 > > > If still not, is there any work around or alternative solutions? How
 > about
 > > > if we are willing to do some minimual coding to get it to work?
 > > >
 > > > Thanks
 > > >
 > > > Ben
 > > >
 > > > p.s. if there is an answer exist to this question, please point me to
 > there.
 > > > thanks
 > > > p.p.s. i can't give up this question because (1) it is important to us,
 > we
 > > > don't want to run weblogic and IIS at the same time (2) I can't believe
 > > > weblogic can't do this. I think it is just missing in the documentation.
 > It
 > > > is such a basic feature in ANY web server
 > >
 > > --
 > > =====================================================
 > > Reply to the newsgroup. Don't reply to this mail
 > > alias. This is used only for answering posts on
 > > WebLogic Newsgroups.
 > > =====================================================
 > >
 > >
 [russell.vcf]

How can I set up an email user as "send-only" (no mailbox for receiving)?

Can anyone tell me how I can set up an email account that can send emails but not receive emails.
Our Web application has been using a generic email address "[email protected]" in all of our PHP Web applications as the sending email account. I have this user set up in WORKGROUP ADMIN as a proper account. However the account gets tons of SPAM emails and is constantly filling up.
Also, all of the email accounts require SMTP authentication to send emails.
Is there any way to identify an account as a send only account so we can generate emails from our Web applications that cannot be replied to?
Thanks for the help
-- Jon

Doing so will cause issues. If you send out mail which to an outside server appears to be non existent, mail may be rejected and you may even be blacklisted.
You can remove the account from WGM and add a role account as an alias send to /dev/null. This will look to the outside world like an existing address, but simply be discarded on your system. You should however include a working address in your mailings for people to be able to respond.
Assuming you use local domains, edit /etc/postfix/aliases and add:
noreply: /dev/null
(you can change noreply with the sender used in your PHP apps, but I'd probably change the PHP apps to use noreply as this signals to people receiving your mails that this address is unattended).
When done, issue:
sudo postalias /etc/postfix/aliases
sudo newaliases
sudo postfix reload
HTH,
Alex

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

How do I set up multiple SMTPs ?

Hi
I have 3 websites all of which have their own email accounts hosted thru godaddy.com.
I was able to set ONE up using the "smtpout.secureserver.net" but the next one I tried to set up just 'hangs'.
I'm not sure what the problem is .. except that I think the 2nd email addy that I'm trying to add is attempting to use the same 'smtp out' as the first.
Does anyone know how I can set up 3 separate email accounts ?

Do all 3 email accounts have the same incoming mail server and if so, does each account or email address have its own user name or do all 3 email accounts or addresses share the same user name?
You can set up multiple/separate email accounts with the same provider, same incoming mail server and each account can have the same password as long as each account has its own user name. An additional email address with the same provider with the same incoming mail server can not be set up as a separate account with Mail if the additional email address shares the same user name as an existing or primary email account with the same provider. The latter is called an "alias" email address to the primary. An "alias" email address to a primary email account or address shares the same user name, incoming mail server and password as the primary email account or address.

How can I set #HOST# variable referenced in the Chart template?

#HOST# and #HOST_PROTOCOL# are being set incorrectly by APEX from CGI variables when I create a chart. I am using APEX 4.1 and Oracle 11g. The get the continual "Loading data..." and then after it times out I get "Error loading file".
Before we changed to a secure http environment, our charts worked. After we changed to the new web layer, the charts do not work. The #HOST# substitution was set to http://correctservername/ and #HOST_PROTOCOL# was set to http. We set PlsqlCGIEnvironmentList REQUEST_PROTOCOL=https in the dads configuration file and now the #HOST# displays https but it also includes the default port number which we do not want (https://correctservername:port/) The charts work without the port. REQUEST_PROTOCOL is not in the cgi list and setting this variable set #HOST_PROTOCOL#. What variable can we set to make #HOST# correct. It seems like #HOST# is being set by #REQUEST_PROTOCOL#'://'||HTTP_HOST||':'||SERVER_PORT||SCRIPT_NAME||'/'. SERVER_NAME could also be used in of HTTP_HOST. I don't know how APEX is setting #HOST#. Does it come from a host alias somewhere in the environment?
I don't want to add a new cgi variable called HOST because HOST sounds so generic and it might interfere with something else running in our environment. Or, I don't want to change the plsql cgi environment variable (such as HTTP_HOST) because many developers may use owa_util.get_cgi_env('HTTP_HOST') to get the current server. If the SERVER_PORT is part of the #HOST# then what could I change it to if it needs to be null. If you leave it blank, then the default SERVER_PORT comes from the CGI variables.
I would rather not create a global variable (hard-coding) and create a new chart template using the global variable or create a before header application process to re-direct url without a port.
Edited by: Donna C-Houston on Oct 10, 2012 1:06 PM

Hi Donna,
changing the CGI environment variables HTTP_HOST, REQUEST_PROTOCOL and SERVER_PORT is the correct way how to resolve this, because it appears that your hiding the web server where you have installed mod_plsql or EPG by a different outside facing web server (also called reverse proxy). That's why APEX gets the host name, protocol and port of the internal web server, but should actually get the values of your reverse proxy web server. Can can fix that by changing the following CGI environment variables.
HTTP_HOST should just contain the domain name (no protocol or port). For example: www.oracle.com
REQUEST_PROTOCOL should contain http or https
SERVER_PORT should be the port for https
I don't want to add a new cgi variable called HOST because HOST sounds so generic and it might interfere with something else running in our environment. Or, I don't want to change the plsql cgi environment variable (such as HTTP_HOST) because many developers may use owa_util.get_cgi_env('HTTP_HOST') to get the current server. If the SERVER_PORT is part of the #HOST# then what could I change it to if it needs to be null. If you leave it blank, then the default SERVER_PORT comes from the CGI variables.The value of HTTP_HOST is wrong anyway and points to your internal web server, but I assume your developers actually want to get the host name of your external web server if they use it to generate absolute URLs. That's why I wouldn't bother and set it to the correct host name.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

How do I set up directory alias in Tomcat 4.0.3?

Similar Messages

Maybe you are looking for