How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

I’m combining several InDesign files into one PDF, with several hundred text links across the different sections, as well as within each. The cross-document (section) Text Anchor Hyperlinks work fine in my workspace - but when I change the file location, they are no longer active (other links, bookmarks remain intact).
How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

They seem to be a lot of extra work, and I don't see what the additional benefit is. I have several hundred links to do. I would appreciate learning what the benefit is, as I don't mind the extra effort if it will deliver the desired results.

Similar Messages

InDesign cross-document Text Anchor Hyperlinks

I’m combining several InDesign files into one PDF, with several hundred text links across the different sections, as well as within each. The cross-document (section) Text Anchor Hyperlinks work fine in my workspace - but when I change the file location, they are no longer active (other links, bookmarks remain intact).
How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

ASk in the ID forum.
Mylenium

How to reference a set of Flash-protected f4v files in a manifest when the files are on Cloudfront?

I have: a self-created AMS 5.0 running on Amazon.
Using latest OSMF player.
I'm Using EZDRM for Flash Access protection.
I have a dynamic bitrate f4m created with the F4F packager. It contains data for three bitrates.
I know that my S3 bucket and Cloudfront distribution are generally working because I can play a set of non-drm files using a RTMP-style manifest
I am successfully issuing the license and playing the videos using that manifest when the files are located on the AMS itself.
The working call to the manifest is this: http://media.blah.com/vod/BlahBlah/Blah.f4m
I think the relevant portion of the manifest is this:
streamId="Blah-1000"
url="Blah-1000"
bitrate="1000"
bootstrapInfoId="bootstrap4543"
drmAdditionalHeaderId="drmMetadata8495"
I think the correct way to approach this it to leave the manifest on AMS and manually change the url in the manifest for each video file
I've tried changing the url in the manifest to point to the cloudfront location
http://blahblah.cloudfront.net/cfx/st/mp4:Blah
But I simply get back: "We are unable to connect to the content you requested."
Your guidance greatly appreciated.
Ken Florian

Hi,
I created a project (JDeveloper) with local xsd-files and tried to delete and recreate them in the structure pane with references to a version on the application server. After reopening the project I deployed it successfully to the bpel server. The process is working fine, but in the structure pane there is no information about any of the xsds anymore and the payload in the variables there is an exception (problem building schema).
How does bpel know where to look for the xsd-files and how does the mapping still work?
This cannot be the way to do it correctly. Do I have a chance to rework an existing project or do I have to rebuild it from scratch in order to have all the references right?
Thanks for any clue.
Bette

How do I set up sync between desktop and laptop not understanding a word the instructions are saying.

If I new more details I would give them to you

Have you read this support article? <br />
https://support.mozilla.com/en-US/kb/how-do-i-set-up-firefox-sync

How do I close multiple documents opened in Finder when the files are loading and the Application is not responding?

I was moving 90 files from one folder to another and instead accidently double clicked all the files I had selected and they all opened at once and now they are all stuck trying to load and the program is not responding.
When I put my mouse over the folders, it's just the loading cursor so i can't select anything. I've tried using 'command' - 'option' - 'W' and that doesn't work either.
I have tried restarting finder and all that does is shut all of the folders and reopens them and they get stuck trying to load all over again.
I have tried restarting my macbook and every time I log back in, it restarts all the programs and all the finder windows and the whole process repeats.
(even when I unselect the 'restart opened programs' box.)
I really hope someone knows how to troubleshoot this problem I am having!

You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O.

How do I set Catalogue to new larger internal hard drive and then delete the files from the smaller

I have just had a new 1TB internal hard drive installed in my PC and then the original smaller internal 500GB hard drive cloned onto it. The new 1TB is now Local Dick C and the smaller 500GB has been changed from C and is now Local Disk F. PSE11 is running from the new C and all my pictures are on both C and F but the catalogue is pointing to F. I want to delete all of the old files on F to free up space since they are all cloned to the new 1TB C, so I want the PSE11 catalogue to point only to the pictures on C. I have tried creating a new Catalogue and importing my pictures from C. The images come in and look connected to C but, when I close PSE11 and then reopen that new catalogue, the image path reads F, as does the original catalogue. So, now I have two catalogues apparently point to F but I want to: 1) have only one catalogue pointing to C; 2) the delete catalogues pointing to F; 3) then reformat F: so I have a clean 500GB old hard drive for future expansion. Can some please help?

Grant, all I can say is that another user was having almost identical issues a month or so ago. Unfortunately I cannot find the discussion thread now but my feeling is that it never resolved satisfactorily while both drives were connected.
To save you a lot of work formatting, copying, erasing and so forth why not just unplug the SATA cable from the old drive and see if the Organizer then starts behaving nicely with the new drive. If it does then you can go the destructive route on the old drive.
Hopefully the poster who had the similar problem might read this and update us on his/her situation - if it got resolved and how.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How Can I Set an Application on a USB Drive to Automatically Open When the Drive is Inserted Into a Mac?

The title pretty much says it all. But if you don't understand, here is an example of what I want to happen:
When a USB drive is inserted onto my Mac, an application on it will open.
How can I make this happen?

I haven't tried it, but perhaps a Watched folder on the external drive & an Applescript?
http://www.mactech.com/articles/mactech/Vol.20/20.07/FolderWatching/index.html
Or perhaps just an Applescript to check for exist :USB Drive Name, then run application?

How to stop PO output when the indicators are updated with a prog. **URGENT

Hi,
I have developed a update prg which will update the Final invoice indicator and Goods reciept indicator in SRM as well as in R/3 only for 'ORDERED' PO's. This was done using BBP_PO_PD_UPDATE FM. Everything is working fine, all the indicators are getting updated as expected both in SRM and R/3.
Only problem is that when the indicators are updated in SRM, PO Output is getting generated which should not happen.
Do you have any idea how to stop the OUTPUT.
This is very urgent.
BR,
Parvez.

PO output
PO Output problems
disable PO output on po change in SRM

Just purchased Nikon D610. tried to import 3 images and got this message: The files are not recognized by the raw format support in Lightroom. How do I fix this frustrating problem. Have been using Lightroom for years also Nikon products without any prior

How do I import images. Have a message that says: The files are not recognized by the raw format suppot in Lightroom. Am using a Mac version 10.9.4. the import is from a new Nikon D610. Am using LR 4.4 Please help Adobe is useless as a support.

Each camera must be supported explicity and your LR version is years older than your camera.
According to Adobe's Camera-support page, you need at least LR 5.3 to work with your D610 NEFs in LR:
Camera Raw plug-in | Supported cameras
If you don't want to upgrade to LR 5, or can't due to your OS being too old, then it might work to use the latest DNG Converter and create DNGs from your NEFs, which should open in LR 4.x. You can find the DNG Converter here: http://www.adobe.com/downloads/updates

How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

HI
I created a web application and configured rbs storage ,
I uploaded documents (for ex: 18 number)
after uploaded documents , and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
and also I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
select count(*) from alldocs
Select count(*) from AllDocstreams
but when I delete some docs from document library ,
1)the doc itself deleted from document library
2)when I check the rbs storage there is no number of files are decreased(its still 39 files ), its same as before doc deleted from doc library
after some time I found the number of files are decreasing from RBS storage folder in sql server,
here I want to know the how the files are decreasing from RBS storage after some time, where shld I check the settings for this? and how I control on it
here how I know the settings for cleaning up orphan BLBOS how these deleted BLOB
adil

1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
2. There is a RBS cleanup job which deletes files from RBS. for more info check
http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

How do I make Word and Excel Documents readable to PC users that cannot open them

How do I make Word and Excel Documents readable to PC users that cannot open them

Be sure to save them in the Office 2007 format as .doc or .xls files.

I would like to know how can I set songs in iTunes to play at different times automatically during the day. i.e. one song at 10am the other at 10:30am etc..

I would like to know how can I set songs in iTunes to play at different times automatically during the day. i.e. one song at 10am the other at 10:30am etc..

How do I set up my drag and drop questionaire to export to a XML file?

How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and drop rank order response of 1,2,3,4.How do I set
up a XML file that receives the responses.I don't understand how to
do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>

Use XML.sendAndLoad.
http://livedocs.macromedia.com/flash/8/main/00002879.html
You will need a server script to receive the XML structure
and it depends on
the server scripting language how you obtain that data. Then
you can either
populate a database or write to a static file or even email
the XML data
received from Flash.
For a basic example, I have two links I use for students in
my Flash
courses:
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLASP/Ex01/XMLASPEchoEx01_D oc.php
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLPHP/EX01/XMLPHPEchoEx01_D oc.php
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"kenpoian" <[email protected]> wrote in
message
news:e5i9hp$cs6$[email protected]..
How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and
drop rank order response of 1,2,3,4.How do I set up a XML
file that receives
the responses.I don't understand how to do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>

How can I set a signature on my text messages?

How can I set a signature on my text messages?

I have iphone4, recently changed my phone number. Prior to the change all of my outgoing sms showed my name and phone number. Since I changed the number have not been able to show the new number on outgoing texts. So I don't understand why my number showed before but unable to add it now.....?
I lost a lot of data when I changed the number so I performed a back-up restore, which restored the data I lost. But now my text messages are showing my old phone number.....!!
Any idea how I can change so the new number is displayed?
I use texting a lot more than I do email with my phone.

How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

Similar Messages

Maybe you are looking for