How do I set up iPhoto '11 version 9.2.1 to send emails with medium/Large/actual size? I try sending photos to a publisher and iPhoto automatically shrinks them to about 40 kB.  Publisher needs between 0.5 and 7 MB.  My ISP has a limit of 12MB

How can I get to email photos at higher resolution?
My "iPhoto" or "Mail" automatically reduces photos to about 40 KB .
My photos, taken with a  common Panasonic Lumix DMC-TZ20 include flora which I send to a publisher.
I am fairly new to my MacBook (Mac S X Version 10.6.8).  I have been using it for a year.
I found I could not successfully send Large or Full size photos.
A few days ago I downloaded a new version of iPhoto (iPhoto '11 version 9.2.1).
Again, although I get the option of choosing to send small/medium/large//full size photos, it actually only sends them as "Small" (ie about 40kb) which is useless to publish.  If I drag a picture onto the desktop (where my EXIF tells me it is full size) then attach it to an email by dragging, againg the sent email is at "small" size ~40KB).
My ISP (Westnet) tells me that their maximum accepted size is 12 MB.
I suspect that I have failed to set up iPhoto for this purpose.  (I am well into retirement but, although geriatric, did study University Physics about half a century ago)

Also, just a note.   iMac PPC is about iMacs that were available up to early 2006.    iMac Intel is for iMacs that were made available early in to 2006 to present.  Forums for what you have in your profile include:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard
https://discussions.apple.com/community/ilife/iphoto
https://discussions.apple.com/community/notebooks/macbook
Please consider posting and reviewing those locations in the future when you have a question that pertains to one of those products.  You'll much more likely get a resposne then.   This is a user to user forum, and you have to seek knowledge in the areas that are most likely to have the topic of your interest.

Similar Messages

  • How do I set the iPhoto library as the Aperture default library?

    I missed the opportunity on first opening Aperture to set the iPhoto library as the one that Aperture uses as the default, and now cannot find out how to do that after that point (it was getting late by the time I had found, installed and updated a copy of Aperture for my Mavericks based system).
    How can I set the iPhoto library as the default, I don't want to have to select the iPhoto library every time I open aperture, but even knowing how to do that would be an improvement on my current knowledge!
    TIA

    That's what I read, but aren't they the minimum specs? Do you know what the upper specs are for using them together? Eg 3.4.5 won't work with iPhoto x.x etc?
    I bought a Retail copy of Aperture 3.0.2 then downloaded the latest Maverick copy of Aperture I could as an upgrade (3.4.5) from the Apple Support site. But there was a newer version 3.5.1 which will also run on Mavericks, but is not currently available either as a retail copy or as an electronic download as Apple will only sell 3.6 now as Yosemite came out a few weeks ago. I really don't want to get Yosemite as then I won't be able to run Filemaker 11 at home for the office. And I can only upgrade Filemaker by getting a whole new set of licences for all the other computers in the office, costing about €2,000 altogether. Then I will have to buy two new Apple Mac minis costing another €1,000. And there are potential issues with other software that I will have to "up"grade to including iWork's watered down products. Wherever I look, Apple is making my life difficult.

  • How do I set up the printer default so that it prints black only, with all my devices and iMac

    Have an Officejet 8600 Plus, used with an iMac. Also using wireless feature to print from iPads and iPhones. The printer has been setup from the iMac to print using the black ink cartridge, only. The problem is with my devices. I am unable to figure out how to set up the printer to print in black when I print from my devices. Is there a solution to this?

    Hi symo46, welcome to the HP Forums. I understand you are trying to determine how to print with black ink only from your iPad. As you may have experienced using Airprint you will not have any options other than number of copies, however the HP ePrint App may have the option you are looking for.
    When printing from the HP ePrint App, if you are printing Office documents or PDFs you can use black ink only.
    Getting Started with ePrint
    I hope this helps.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How do I set up my iPad so that I can recieve the emails from my Outlook Express account

    How do I set up my iPad so that I can recieve the emails from my Outlook Express account

    Your iPad doesn't receive email from Outlook Express (or any other email client).  It receives email from your email provider.  To set up your email account on your iPad go to Settings>Mail,Contacts,Calendars...tap Add Account and add your email provider's account settings with your username and password.  iCloud, Gmail, Yahoo, AOL and Hotmail email settings are automatically entered by tapping the appropriate button.  Others must be manually entered by tapping Other.  (Exchange accounts will also require you to enter your email provider's settings.)

  • How do i set up the viewer window so I can read the email in the bottom section of the window

    how do i set up the viewer window so I can read the email in the bottom section of the window? Someone sat at my computer and changed it and now I cannot restore it.

    Mail Preferences, Viewing, Use Classic Layout.

  • How can I set up my mail page to show more than ten emails at a time?

    How can I set up my mail page to show more than ten emails a time?
    == This happened ==
    Every time Firefox opened
    == I first started using firefox

    There doesn't seem to be a setting in preferences to how many emails I can view at one time.

  • TS1382 Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Read this Apple Support Article on Apple REMOTE
    Good luck!

  • Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Read this Apple Support Article on Apple REMOTE
    Good luck!

  • Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please

    Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please

    Raws, even if not compressed, Sould be smaller than a 24-bit Tiff, since they have only one bitplane. My T3i shoots 14 bit 18MP raws and has a raw file size of 24.5 MB*. An uncompressed Tiff should have a size of 18 MP x 3 bytes per pixel or 54 MB.
    *There must be some lossless compression going on since 18 MP times 1.75 bytes per pixel is 31.5MB for uncompressed raw.

  • How do I set up my Trial Version of Creative Cloud?

    This is probably a simple issue:
    I logged into my Adobe account to register for a Trial Version of Creative Cloud. 
    I don't know if it took effect--I received no notification or instructions.  But, now the "trial" button is greyed out, so I'm assuming I have it now.
    I see there are options to download various apps in the Cloud.  Shouldn't I just download them all?  (I thought they all came downloaded and ready to run.)
    And, with a trial version, will I be able to add CC to my laptop?  And, if not, can I set up another trial version on my laptop?
    Thanks.

    The apps need to be installed selectively. They never install automatically. Once you are signed in, your trial starts  and you can do this on as amny systems as you like.
    Mylenium

  • How do you set up your new version of PSE10 with a new MAC?

    What are the first steps you do when you install a new version of PSE10? I had some settings on my PC (already deleted it and could maneuver around, but I can't figure out how to do this on my MAC - HELP!!!
    I am trying to import elements/photos into my projects, and used to be able to open a window and drag it into the project. I found out I can drag it into my project bin, but not directly onto my project workspace, and then into my project or can I?? Does it have to do with setting up cascading my files, or anything like that?
    I am also having a hard time trying to resize my elements. Keep getting a message that I cannot do anything because pixels are not selected (something to that effect) I can resize right after I put the element into the project, but it seems I cannot go back to it (there are no 'dotted' lines around it anymore) and I get that message.
    Also when I pull anything into my project it goes to the top toolbar in my project. I'm very frustrated with this all!!!

    Sorry you're having trouble. When you say "import" do you mean you want to put things into the organizer or just open them in the editor (for future reference, opening a photo isn't importing it)?
    Where are you dragging from? If you're dragging from the desktop, in recent mac versions you can drag an image into the main workspace only if there isn't a photo already open in the editor. That's just how adobe did it.
    Also when I pull anything into my project it goes to the top toolbar in my project.
    Sorry, don't understand what you're saying here at all. Can you explain in  more detail?

  • How do i set up my office to chrome ? dont have an email print?

    how do i set up my office jet6310  to chrome dont have and email to printer

    Hello lola1025,
    Welcome to the HP Support Forums!
    In order for to print with the Officejet 6310 from your Chromebook, you will need to try adding the printer as a classic printer to your Google account. This should help with that: Using Google Cloud Print with your HP Printer.
    I hope this helps.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How do I set up a POP account that links to my business email account for both receiving and sending

    How do I set up a POP account that links my icloud email to my business email account for both receiving and sending?

    Can you post your Troubleshooting Information?
    Help (Alt-H) - Troubleshooting Information

  • Has anyone out there figured out how to prevent flickering in iphoto 09 snapshot theme?

    Any solutions to flickering in iphoto 09 snapshot theme slideshow ?

    Hi
    It works for me - nothing has changed from previous versions of itunes.
    If you sort by title for example, join does not work. However, sorting by track no fixes this. In any event, discs are usually displayed in correct order and can be joined.
    Jim

  • How would you set up your hard drives if you had these to work with

    So I currently have :
    1 internal 1 Tb 7200 HDD
    1 internal 300gb 7200 HDD
    This is all im using right now, but I also have a 3 TB external that I use to store media and also edit from. I was bringing the footage into the internal drives to edit from but space was growing thin.
    I bought other drives to redo my entire hard drive set up while incorporating the old ones as well
    1 2 Tb internal 7300 HDD
    2 250gb SSD (They are however not the same brand.)
    If someone could please give an opinion on how they would set these up from scratch that would be swell, or you can also recommend adding in another drive into the mix as well.

    ok, the internals Im using now i can't get in to see the model numbers, but for the others they are;
    Seagate Constellation ES.3 ST2000NM0033 2 TB 3.5" Internal Hard Drive - Newegg.com
    Kingston SSDNow V200 Series SV200S3/256G 2.5" 256GB SATA III Internal Solid State Drive
    SAMSUNG 840 EVO MZ-7TE250BW 2.5" 250GB SATA

Maybe you are looking for

  • Scratch disks and RAM usage

    i would like to understand the relationship between scratch disks and RAM usage in Photoshop. While i was working on a fairly big psb file (2gb), photoshop kept prompting that I was out of memory, but in fact the utilization was only 75% (i had 16gbs

  • Not all loops appear in loop browser... even after I reindex.  Please help.

    I've just spent the past couple of hours trying to reindex my loops so that they all show in the browser... to no avail. Which is to say, they will show, if you know how to find them. Let me explain: I have Jam Pack Promos 2, 3, and 4. These loops be

  • GR/IR Slip Number_MB0A

    Hi The req is, We need to give internal and plant wise number ranges to this GR/IR Slip No. How this can be done? Vijay

  • KM content Migration from EP 5 to Ep7

    Hi There. We are trying to migrate Km content from EP5 to EP.. i know that this can be achieved through ICE. and i have seen couple of blogs also but i am still not able to get any step by step info..  along with all pre-requisite.. Can you please sh

  • "Reduce File Size" Spaces/Spreads out text...

    I have a 12-page newsletter created in InDesign CS4. I run it through our ApogeeX workflow for production PDF output. I need to take that PDF and reduce the file size down so as to email a copy to the client for proofing purposes only. Using the "Red