How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

Similar Messages

  • HT201338 adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

    I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
    Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

    I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
    Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

  • If my wife and I have two seperate itunes accounts can we both have home sharing on the same computers at the same time or is it one or the other

    If my wife and I have two seperate itunes accounts can we both use home sharing at the same time on different computers to view each others librarys or is it one or the other only

    You can share your libraries within the same household:
    http://support.apple.com/kb/PH1455?viewlocale=en_US
    And here:
    http://support.apple.com/kb/PH1453?viewlocale=en_US

  • With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not work anymore. Why not, and is there a way to do both with the most current version?

    With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.

    Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?

  • How do I adjust the page orientation in Pages?  I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape.  Is this possible?  I can only get it to be one or the other but not both.

    I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape.  Is this possible?  I can only get it to be one or the other but not both.

    The work around is to do two documents, one in portrait format and one in landscape format. When finished export to Pdf. open in Preview by select both files and use Cmd + O or doubleclick. You can now in Previews thumbnail column the pages from one document into the other and then save.
    If you have created only one with i.e. all pages in portrait format but with the content for the landscape pages rotated on the pages, you can rotate the pages in Preview. Two ways to get the same result.

  • How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

    How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

    You have to select one or the other.
    Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
    Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
    Peter

  • Hey dear my i phone locked and stak at the same time i can`t open it how can i solve this problem

    hey dear my i phone locked and stak at the same time i can`t open it how can i solve this problem

      Try to Reset your device:
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • Hi! I have a library of around 1000 songs on my iTunes, I recently synced my phone and all was lost, my partner has the same songs on hers with a different sign in, but not backed up anywhere, any suggestion on how I can store her tunes in my account ???

    Hi! I have a library of around 1000 songs on my iTunes, I recently synced my phone and all was lost, my partner has the same songs on hers with a different sign in, but not backed up anywhere, any suggestion on how I can store her tunes in my account ??? Then sync them to mine? When I sign her phone into her account I get a message warning that if I sync the dogs on her phone will be replaced by the ones in the library! But as there are no songs there I'm reluctant to continue!!! Please help this non techi guy.!!!!!

    Hello Solid Buck,
    Thank you so much for providing the details about the duplicate song issue you are experiencing.  It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone. 
    In this situation, I recommend deleting the individual songs that do not play directly from your iPhone.  I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
    Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks

    sandrafromsilver spring wrote:
    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks
    Go to the following link:
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

  • HT204389 How do I delete my email messages and also delete my laptop messages at the same time, as I used to do with my Blackberry?

    How do I delete my email messages along with my laptop messages at the same time, as I used to do with my Blackberry?

    You need to configure the mail client to use IMAP instead of POP3 protocol.

  • Can you check for data in one table or another but not both in one query?

    I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
    ACCOUNT
    AccountID     Name   
    123               John Doe
    124               Jane Donaldson           
    125               Harold Douglas    
    MARKETER_ACCOUNT
    Key     AccountID     Marketer    StartDate     EndDate
    1001     123               10526          8/3/2008     9/27/2009
    1017     123               10987          9/28/2009     12/31/4712    (high date ~ which means currently with this marketer)
    1023     124               10541          12/03/2010     12/31/4712
    ARCHIVE
    Key     AccountID     Marketer    StartDate     EndDate
    1015     124               10526          8/3/2008     12/02/2010
    1033     125               10987         01/01/2011     01/31/2012  
    So my query needs to return the following:
    123     John Doe                        10526     8/3/2008     9/27/2009
    124     Jane Donaldson             10541     12/03/2010     12/31/4712     (this is the later of the two records for this account between archive and marketer_account tables)
    125     Harold Douglas               10987          01/01/2011     01/31/2012     (he is only in archive, so get this record)
    I'm unsure how to proceed in one query.  Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
    open CURSOR_ACCT
              select AccountID
              from
                     ACCOUNT A,
                     MARKETER_ACCOUNT M,
                     ARCHIVE R
               where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
                                                    where M2.AccountID = A.AccountID),
                                                      (select max(R.EndDate) from Archive R2
                                                    where R2.AccountID = A.AccountID)
                   and upper(A.Name) like parameter || '%'
    <can you do a NVL like this?   probably not...   I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
    (parameter could be "DO", so I return all names starting with DO...)

    if I understand your description I would assume that for John Dow we would expect the second row from marketer_account  ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
    drop table account;
    drop table marketer_account;
    drop table marketer_account_archive;
    create table account (
        id number
      , name varchar2(20)
    insert into account values (123, 'John Doe');
    insert into account values (124, 'Jane Donaldson');
    insert into account values (125, 'Harold Douglas');
    create table marketer_account (
        key number
      , AccountId number
      , MktKey number
      , FromDt date
      , ToDate date
    insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
    insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
    insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
    create table marketer_account_archive (
        key number
      , AccountId number
      , MktKey number
      , FromDt date
      , ToDate date
    insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
    insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
    select key, AccountId, MktKey, FromDt, ToDate
         , max(FromDt) over(partition by AccountId) max_FromDt
      from marketer_account
    union all
    select key, AccountId, MktKey, FromDt, ToDate
         , max(FromDt) over(partition by AccountId) max_FromDt
      from marketer_account_archive;
    with
    basedata as (
    select key, AccountId, MktKey, FromDt, ToDate
      from marketer_account
    union all
    select key, AccountId, MktKey, FromDt, ToDate
      from marketer_account_archive
    basedata_with_max_intervals as (
    select key, AccountId, MktKey, FromDt, ToDate
         , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
      from basedata
    filtered_basedata as (
    select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
    select a.id
         , a.name
         , b.MktKey
         , b.FromDt
         , b.ToDate
      from account a
      join filtered_basedata b
        on (a.id = b.AccountId)
    ID NAME                     MKTKEY FROMDT     TODATE
    123 John Doe                  10987 28.09.2009 31.12.4712
    124 Jane Donaldson            10541 03.12.2010 31.12.4712
    125 Harold Douglas            10987 01.01.2011 31.01.2012
    If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
    Regards
    Martin

  • How can I record a microphone and software instrument at the same time in Garageband 10.0.1?  It seems I can record one or the other, but not both at the same time?

    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.  It seems that I can't record the mic input and the software instrument at the same time.  I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
    It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
    Can someone help?
    Thanks,
    Kurt

    Kurt1997 wrote:
    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
    you need to "record enable" both tracks:
    http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How do i connect both my ipad and iphone to wifi at the same time. i can one or the other connected but not both?, how do i connect both my ipad and iphone to wifi at the same time. i can one or the other connected but not both?

    ive just moved out and have just been connected to talk talk broadband today.  Both my ipad mini and iphone are saying they are connected to wifi but only my iphone will connect to online services where my ipad mini won't.  But if i disconnect my iphone from wifi then my ipad will work online and then when trying to connect my iphone back to wifi that won't work with online services.  is this because they are both using the same apple account?  though when i was living at home my mum had sky router and i was able to connect both devices with no problem.  is there anyway of connecting both devices so they work online at the same time??

    There is absolutely no reason why they should not bothe be able to connect to your WiFi network. The easiest place to start would be to reboot your router. Unplug it for about 30 seconds and then plug it back in again. I would also restart both the iPad and the iPhone.

  • Mac mini server has suddenly stopped seeing one or the other bluetooth devices! Batteries have been changed and they will connect to an older Mac mini. Server will now only see one or the other but not both.

    My Mac mini server has suddenly stopped seeing one or the other bluetooth devices, either the wireless keyboard or the mouse( both apple products) have tried new batteries, at first it was the mouse that stopped responding, but upon rebooting the computer now the keyboard will not respond and the mouse works. Both work fine on an older Mac mini that I hooked back up to check.

    There is absolutely no reason why they should not bothe be able to connect to your WiFi network. The easiest place to start would be to reboot your router. Unplug it for about 30 seconds and then plug it back in again. I would also restart both the iPad and the iPhone.

  • HT1600 I have Apple TV version 7.4.2 and we pressed on the remote the select button and the menu button at the same time to update our software.  The box shows white light, we can get the screen to select netflix but nothing will move and the box will not

    I have Apple TV version 7.4.2.  We read in a blog that in order to reset our Apple TV we should press the menu button and the select big button at the same time which we did.  Now when we attempt to turn on the apple tv box it with the remote we get a white light and sometimes we can get the menu screen but the remote will not let us move now will it allow us to turn the apple tv on or off.  If we just leave it alone, the white light eventually goes away.  I did unplug the apple tv and we removed the batteries and reinstalled them from the remote and that did not make any difference.  Please advise. 

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.

Maybe you are looking for