How do I shrink a document with pictures on it in MB size??

I did an add for newspaper with pictures on it. When I tryed to e-mail it was whopping 10.3MB in size!! I tryed to go back and see if I can shrink in iPhoto, but no such luck, or I don't know where and how. Is somebody Here with advise? This is my first time in support so I'm not sure on what to ask.
Thanks!

food,
There are two things you can try: 1) the first is reducing the size of the output. I'm assuming the newspaper can deal with PDF as an output format -- and since the ad is for that medium, I'm also assuming it doesn't need to be particularly high resolution. So, try this -- while in your file, click on File > Export > PDF > Good (as opposed to Better or Best). That should give you a much smaller file. You need to decided if it's small enough and of high enough quality; 2) if you don't like the results with the previous method, you'll need to pull your photos out of the file, then reduce the resolution using photo editing software -- then put them back in the file. Obviously, method #1 is a lot less work, which is why I'm suggesting you try it first.
Let us know how it works out.
-Dennis

Similar Messages

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Help! How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?

I am a new Indesign user and I have been working with GIMP for the last year creating single colour print-ready PDFs. But now I need to create a document with a FOGRA27 CMYK colour profile and a resolution of at least
How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?
I can import the PDF by creating a new document and finding the PDF in places, but it's bad quality.
The only colour profile I can find under View - Proof Setup is FOGRA39, but I need FOGRA27!
Help help help, I need to get these files printed in two days!
Thanks so much..
xx

Proof Colors doesn't change the file's color management, it just lets you see what the color values would look like if they are printed unchanged on different output devices. If you want to actually convert the color from one CMYK space to another, it's probably better to do that in Acrobat—Tools>Print Production>Convert Colors.
There's very little difference between Fogra27 and Fogra39—Fogra27 allows more total ink 350 vs. 330.
There's nothing you can do to improve the quality of low res images

HT5232 does ipad mini have a usb port? if not then how can i share my documents with devices other than apple?

does ipad mini have a usb port? if not then how can i share my documents with devices other than apple?

Wireless Flash Drive (tap to enlarge image)

How to update the posted documents with Business Area wise

Dear experts
Please suggest me how to update the posted documents with Business Area wise
Ajeesh.s
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Nov 2, 2011 2:26 PM

Hi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West

How do I open dual documents with windows8?

How do I open dual documents with windows8? whenever I have one adobe doc open and i need to reference another, it will only open one at a time...I want to view with a split screen...HELP!
Message was edited by: big_bubber

Adobe Reader Touch for Windows 8 doesn't support more than one document opened at a time. Good feature request! Thanks.

How do I print .pdf documents with reader for windows 8?

I have Reader for windows 8. How can I print .pdf documents with it?

See FAQ: Printing from Adobe Reader for Windows 8 Tablets.

How can I open a document with applescript without the doc. window opening.

How can I open a document with applescript without opening the document window and speak the text of the document? I can get it to open the file but the doc window always opens up.

try
          set pathToMyFolderOnDesktop to ("Macintosh HD:Users:jodyconnor:Desktop:") & "Dsource:" as alias
          set rnd to (random number from 1 to 6)
          set rndFileName to (rnd as text) & ".scpt"
          set FullPath to pathToMyFolderOnDesktop & rndFileName as text
          set myScript to load script (FullPath as alias)
run script myScript
on error the error_message number the error_number
          display dialog "Error: " & the error_number & ". " & the error_message buttons {"OK"} default button 1
          return
end try
This code answered my question: Hats off to Digimonk from stackoverflow and Darrick Herewe from stackoverflow.

How can I share documents, with pictures, in icloud

Hello,
I have a question about Pages and iCloud:
I created a document with 2 pictures in it on my mac. I imported them from Iphoto, worked fine.
Then I uploaded the document to icloud.com, to share it with my iphone/ipad.
The document appears in the cloud but it's missing the pictures.
Well, the problem is obviously that on the mac, the pictures are just linked to the document. Is there any way to import them into the document so I can share everythin with icloud?
Thank you all!
Georg

Thank you, but I figured it out:
In the first document, I had the Images inside a table and that didn't work with iCloud. If you place an Image normally inside a document, it works fine.
I think it's a bug in the iOS version of Pages, because you have to open iCloud documents first on your mobile device, then it updates (ruines) the iCloud document, and then you can open the document on a mac again for the first time and it gets the thumbnail.
I tried some other sharing yesterday and it seems that iOS Pages can't handle A3 or horizontal format dokuments either.
I'm shure it will be improved in the future.
Thank you fruhulda for your help!
Georg

How to find Down Payment document with vendor details from AW01N

Hi,
I am trying to do partial settlement in KO88, for AUC to Fixed Asset. While running the T Code I am getting the following error message.
Down payment to recipient 100620 0 area 01 amount   13,181,454.04 not cleared
Message no. AW605
I went through many threads for this issue and I am trying to clear the downpayment in F-54. But I am not able to find the Vendor details to whom the Down Payment was done, neither the dosument number against which the downpayment has to be cleared.
I tried finding these details in AW01N. I could find the amount reflecting in the Planned and Posted tab in the first section.
But was not succesful to find the documents and vendor details from there.
In the second section in Planned Tab, I am finding some transactions. There I am finding Down Payment mentioned. When I double click on Down Payment in AW01N, I am taken to the document which is a clearing of Down Payment. You can see the below entry.
81008100
Fixed Assets Interim
1,049,371.84-
30300100
000000900000 0000
2,538,367.44
30520000
Clg Cap D-Pmts-T-Ast
2,538,367.44-
30300100
000000900000 0000
1,049,371.84
30300100
000000900000 0000
101,948.00-
30520000
Clg Cap D-Pmts-T-Ast
101,948.00
Now, how do I know which documents to be cleared to which Invoice and the vendor details.
Kindly help me with this issue.

Hi,
Thanks. Kindly suggest now, how to find the documents and vendor details from there.
When I double click on any Down Payment in AW01N, I am taken to the document which is a clearing of Down Payment. You can see the below entry.
81008100
Fixed Assets Interim
1,049,371.84-
30300100
000000900000 0000
2,538,367.44
30520000
Clg Cap D-Pmts-T-Ast
2,538,367.44-
30300100
000000900000 0000
1,049,371.84
30300100
000000900000 0000
101,948.00-
30520000
Clg Cap D-Pmts-T-Ast
101,948.00
Now, I want to clear the down payments in F-54, but how do I know which documents needs to be cleared to which Invoice and the vendor details. Since I am getting error while executing KO88 AUC transfer to Assets.
Down payment to recipient 100620 0 area 01 amount   12,832,161.41 not cleared
Message no. AW605
Diagnosis
All downpayments were not cleared for the asset under construction for the receiver 100620 0 in area 01. An amount of   12,832,161.41 was not cleared, or too much was cleared.
You can only completely transfer an asset under construction if you reverse the down payments in the current fiscal year beforehand.
Procedure
Clear the downpayments that you want to settle to receiver 100620 0.
Check screen shot.

How to reverse a FI document with line item that is cleared

Dear All,
I have similar problem like the previous post here:
https://forums.sdn.sap.com/click.jspa?searchID=6017563&messageID=3142217
the difference is, the document was posted several months before.
In March, there is 2 vendor document with 3 item, say 100001 and 100002.
the document 100001 is false and changed with 100002 but 100001 is not reversed.
In April, item 3 of document 100001 is cleared with document 200001.
this is wrong because the cleared item should be in document 100002.
this problem is known in October.
How do we fix this problem?
Thank you All.
Regards,
Fatah.

Hi,
Use <b>Tr. Code: FBRA</b> give document number if you want reset then click on reset or if you want reverse the click reverse.
this solution is sufficient for you problem.

How can I save a folder with pictures in it, on PC or MAC? (Not Camera Roll)

Dear Apple Community,
I want to save a Folder with pictures in it, that I created from the iPhone.. these photos (and videos) are available only in this folder and I don't want to loose them at all!
Whatever, how can I save this folders on my mac? and/or PC? And I don't mean the camera roll folder! Just this folder that I created on the iPhone.
Thanks in advance for you anwers!
Best Regards,
Luke

Not supported by Apple. The only photos that can be imported from an iPhone are photos in the camera roll.

How to post a PARK document with Withholding Tax

Hi All,
I have parked a document using FB60.Vendor is subject to withholding tax.Now,when i am posting the document through FBV0,the error message displayed is :
"Field BSEG-SECCO does not exist in the screen SAPMF05A 0303".
The error message says that Section Code (Withholding Tax) is missing for Special G/L Indicator Line Item.I dont have provision to enter section code in the screen.
My entries are :
29J Vendor a/c Dr.
50 XYZ a/c
If i using F-02 and not parking ;then it is getting posted.
Note: Line Item is a special G/L Indicator
Please advise how to post a park document using FBV0 with special g/L Indicator and vendor is subject to withholding tax.

Hi Parag,
Section code field doesnot exist in the special G/L indicator line item of the document.So,i cannot enter it.
But,when posting the parked document ,it is asking for Section Code.
The error message displayed is:
"Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303"

Word document with picture JPEG

When I save a word document with a JPEG picture inserted to PDF the picture appears gray?

Hi Martin,
Are you viewing that PDF in Adobe Reader or Acrobat (and what version)?
It sounds like you may have an option selected in the preferences that causes large images to appear as gray boxes. Please try this:
Choose Edit > Preferences (Windows) or Acrobat/Reader > Preferences (Mac OS).
Click the Page Display category on the left.
Select Show Large Images, and then click OK.
Did that do the trick?
Best,
Sara

How do you save a document with a new name?

OK I decided to go with Pages as my document editor on my iPad 2. It seems to be powerful enough to do the kind of text editing that I need to do. I need some tables, a few graphics, headers, footers, etc. You know the basic stuff. I am not going to try to write a dissertation or thesis on my iPad, but I need to be able to write memos and some work documents.
I am having a hard time learning the Apple way of doing things I guess. Must be too many years on a PC using Microsoft Office.
But I need to know how to open an existing document, make some changes and then save it with a new name so I don't overwrite my original document? Just a basic "Save As" function.
Is this possible? Or has Apple devised a way that I am just not seeing yet?

Hi
Someone maybe can tell you another/the right way of doing this but I do it this way. In pages press and hold the document until it wiggles and then select it by touching it so the orange border appears around it, then press the folder button at the top, the one with the + sign on it and this will create an exact copy on the documents screen. Then just open and edit that one thus preserving the content of the original.
There may well be a better way, but hope this helps.
Regards
Matt.

How do I shrink a document with pictures on it in MB size??

Similar Messages

Maybe you are looking for