How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Similar Messages

  • Unable to start debugging on the web server error message when running asp

    Hi Mark,
    i want to apply a asp web application on your book at page 336/337
    I am using .NET 2005 pro. edition.But if i run(play button) the asp web site
    it gives above error message which i wrote on the subject.
    Could someone help me?
    Thanks for reading..
    Regards..
    S.K

    You may want to check whether your Web application has been configured to use "Integrated Windows Authentication".
    Go to your IIS, check the Properties of your web application under Web Sites\Default Web Site, select "Directory Security" tab, click the first "Edit..." button (for Anonymous access and authentication control). At the very bottom, make sure "Integrated Windows authentication" is checked.
    Re-start your Web application.
    Message was edited by:
    shsu

  • SRKIM: Bis dashboard 에서 BIB-7000 Cannot Access X Server Error

    PURPOSE
    Bis dashboard page 에서 발생하는 BIB-7000 Cannot Access X Server error 를 해결한다.
    Problem Description
    Graph를 보여 주는 BIS dashboard page 에 접근 시 아래와 같은 error 가 발생한다.
    Error
    You have encountered an unexpected error. Please contact the System Administrator for assistance.
    Click here for exception details.
    On clicking the link, exception stack would be displayed where
    “java.lang.RuntimeException: BIB-7000 Cannot access X Server" is displayed
    Workaround
    N/A
    Solution Description
    1.     Applications 와 Database tier 의 context file 에서 "s_display" 변수가 제대로 설정 되었는지 확인 한다.
    Nav : Application (OAM) > AutoConfig > Edit Parameters
    "s_display" 변수는 반드시 아래와 같은 형식으로 설정 되어 있어야 하며 해당 Display Server 가 반드시 running 상태 여야 한다.
    "DISPLAY <hostname or ip address>:0.0"
    2. 'root' user 로 Display Server에 접속 하여 DISPLAY 환경 변수를 아래와 같이 설정한다.
    For csh:
    % setenv DISPLAY <hostname or ip address>:0.0
    example: setenv DISPLAY 192.168.1.128:0.0
    For sh, ksh and bash:
    $ DISPLAY=<hostname or ip address>:0.0; export DISPLAY
    example: DISPLAY=192.168.1.128:0.0; export DISPLAY
    3. adstpall.sh script 을 이용하여 application services 를 다시 시작한다.
    Reference Documents
    Note. 390519.1 Java.Lang.Runtimeexception: BIB-7000 Cannot Access X Server

    oracle0282 wrote:
    Version : 11.5.10.2
    There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
    pls advice what is the caused of this issue.What is the navigation path?
    Please also see these docs.
    11.5.9/11.5.10: Account Manager Dashboard Error: "You Have Encountered An Unexpected Error" with Exception Error: "Java.Lang.RuntimeException: BIB-7000 Cannot Access X Server" [ID 390519.1]
    'BIB-7000 Cannot access X Server' Error Clicking on Details Button in Compensation Workbench Approvals Task [ID 558420.1]
    Opening Reporting Page (Tab) Results In Java Exception Error: BIB-7000 Cannot Access X Server [ID 337899.1]
    BIB-7000 Server Error On Navigating To Oracle Marketing Audience Workbench [ID 433209.1]
    How to Test X-Server in JSP Module [ID 461497.1]
    Clicking Configure icon in DBI gives You have encountered an unexpected error. Please contact the System Administrator for assistance [ID 303422.1]
    Troubleshooting FNDREPRINT Framework in 11.5.10 [ID 330351.1]
    ATTEMPING TO VIEW GRAPHICS OR TRYING TO CONFIGURE THE JAVA MAILER HANGS [ID 351839.1]
    Thanks,
    Hussein

  • Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • Server error message when i sign into windows live messenger

    hey everyone, i hope someone can help me. ive got a bit of a problem. when i sign into windows live on my blackberry it comes up with an server error message and signs me back out again. ive tried deleting windows live off and re-installing it. i dont know what to do now? i also receive emails to my blackberry off the same address, is this the reason why hope someone can help me!

    Ok here is the message.
    You don't have permission to access "http://discussions.apple.com/edit-profile-avatar!input.jspa?" on this server.
    Reference #18.c53c4317.1408508622.122a3199
    The reference number will vary when I refresh the page.

  • Cannot access web server internally with ea6200

    I have the same problem as found in these posts:
    http://community.linksys.com/t5/Wireless-Routers/Cannot-access-server-internally/m-p/743969/highligh...
    http://community.linksys.com/t5/Wired-Routers/Accessing-Internal-Web-Servers-External-OK-Internal-No...
    http://community.linksys.com/t5/Wireless-Routers/EA6500-NAT-Redirection-Bug/td-p/583820/highlight/fa...
    Basically, I can't access my local http http server.  Like the other posters, this is a new router and I've never had this problem before.  I know very little about networking, but I am a developer and need my server to be accessible on my LAN.
    The only things I’ve done since setting up the router are:
    Setup the wifi security
    Enable the media prioritization as a user suggested in the last link I posted.
    Forward ports 80 and 8080 – I did this knowing that it made no sense because I only care about local access, but since nothing else with this stupid router makes any sense, I figured, “what the hell!”
    I really appreciate any help I can get.  I’m thinking about just ordering a new router and sending this PoS back to newegg.

    Hi jerred121, I've done a bit of a research about this feature. There is what we call DNS Rebinding Attacks, certain actions will not work from behind the router, this is for your own protection. I know it worked before with older routers.
    If you need to access your server locally, you can use the private IP of that device rather than the public IP.

  • Cannot connect to server error message

    When i press the apps icon on the printer,  an error message pops up that says it cannot connect to the server.  other than this the printer works fine.  it prints from my phone and computer, just cant get the apps function to work.

    Hi,
    I understand that you are not able to access apps. In order to access to App, printer needs to have access to the internet. 
    Please follow the steps from the link below to resolve your issue.
    eprint
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Although I am employed by HP, I am speaking for myself and not for HP.

  • While starting sun one web server error message

    i have installed sun one web server 6.1,then i tried to start it from start up menu icon "start server administration server".the command prompt just displays and goes off.then i tried to start it from command prompt by giving path
    "C:\Sun\WebServer6.1\https-pcname.com>startsvr".
    error comes like this
    C:\Sun\WebServer6.1\https-pcname.com>net start https-pcname.com Access is denied
    can any one help me to solve this .

    You most probably don't have admin priviledges required to start a service on this Windows machine.

  • Cannot access music store - error message 404

    ok- i guess i'm looking for an explanation more than a solution. while trying to download a song (as usual) this morning i received an error message for the first time ever. "cannot access music store. please try again later. 404" ... for 2 hours i searched the net for a solution, checked my firewall, even joined this forum. right before posting this message again, i tried to download the song so i'd be able to explain the error message in this posting. but itunes decided to work.
    my question-- does itunes sometimes time out because of heavy traffic? will this problem lessen if i upgrade to a newer version? (btw- how do i do that? i checked off "dont remind me again" when the pesky reminder would pop up... now i want to upgrade.)

    Hi - I have the same problem. With the additional wrinkle that I can't close iTunes when it can't connect to the Music store. I have to use Task Manager to kill it. I am totally fed up with Apple for their lack of support on this. However, I have had one thought though: I notice that iTunes registers itself with Windows Firewall as an exceptional program that is allowed to receive incoming network connections. I don't object to that - but the thing is I am using a network modem which has its own built-in firewall. If iTunes has to be able to receive incoming network connections, don't I have to configure the network modem's firewall to treat it as an exception too? I have just done a search for "iTunes Firewall" in Google and it came up with loads of promising looking stuff. I will investigate further.

  • Ical server error message when accessed remotely

    hello we have a 10.6.7 ical server running mostly smoothly when accessed from the LAN.
    however, when accessed remotely it generates the following error message:
    The server responded with “HTTP/1.1 501 Not Implemented” to operation CalDAVAccountRefreshQueueableOperation.
    the message provides the following 2 responses / buttons: stay offline or go online - trouble is once you click go online, it comes up with the same message again.
    unfortunately, research the error message has so far not produced any promising results, thus any ideas would be much appreciated.

    There are many reports here on this site about this, crossing different carriers and regions of the world. Consequently, the only deduction that can be made is that this is a system-level issue rather than a single user issue. Hence, what each affected user must do is contact their mobile service provider for formal support and possible escalation up to BlackBerry.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • "Extraction Failed: Cannot Open Output File" error message when installing new drivers

    Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer.  I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
    Extraction Failed
    Cannot Open Output File
    And the process closes.  It happens at about 85% extraction every time.
    Any idea why?  I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support??  Poor, poor customer service.
    This question was solved.
    View Solution.

    Hi,
    If you haven't still got the  Full Feature software installer, download it from the link below and save it to your Desktop.  If you already have it, place it on your Desktop.
    ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
    Make sure the Printer is disconnected from your PC.
    Download and install 7-ZIP.  Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
    Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ).  Connect the printer to your PC when the software asks.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to avoid "App requires Adobe Flash." error message when Adobe Flash is already installed??!!

    On my new Lenovo Yoga 3 PC laptop I am trying to install Kayak and Pandora apps but once these apps are downloaded, whenever I try to open them, an error message pops up saying: ADOBE FLASH REQUIRED. The Kayak (or Pandora) app requires Adobe Flash. Installation is free.  "Install" or "Not Now".
    I have installed Adobe Flash 10 times and rebooted etc. but I still cannot use those apps because of this error message.
    This is driving me crazy.
    I have checked to confirm that the newest version of Adobe Flash IS installed and working on my computer.
    What can I do?????
    Thank you.

    Typically when software applications are using an embedded browser window that wants Flash, they're looking for the ActiveX version used in Internet Explorer.  If you've been installing Flash Player for Firefox, that's not going to help.
    Fire up Internet Explorer, go to http://get.adobe.com/flashplayer and follow the prompts.  This should resolve the issue for you.
    If you're already using Internet Explorer on a Windows 8 or higher machine, then Flash Player is already a built-in component of IE.  The problems you're running into may be specific to the intersection of those websites and Internet Explorer 11.  (IE11 makes a bunch of changes to how the browser is identified, which may ultimately cause the sites to fail to detect Flash.)  In that instance, the easiest workaround is probably to just use Google Chrome - http://www.google.com/chrome/ while we wait for the world to adjust to Internet Explorer's new approach.

  • Get 500 Internal Server Error message when attempting to open Firefox.

    Firefox working fine until last week. Cannot connect. Only receive error message. Uninstalled & re-installed. Same error message. Windows 7, Zone Alarm. Explorer 8.

    Hi,
    According to your description, there is a 500 internal server error when you select any Option in your OWA.
    Based on my research, we can try the following steps:
    1.  Check whether Virtual Directories Authentication configured properly. Enable the ECP Virtual Directory with Anonymous and Basic Authentication.
    2.  Check on the Application Pools to view whether ECP Application Pool is running on .NET Framework v4.0. It maybe the incompletely installation of Framework that causes this error.
    If so, We can try to run the following command as Administrator:
    %windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
    Or change the MSExchangeECPAppPool from .NET Framework from v4.0 to v2.0. Then restart IIS.
    If you have any question, please do not hesitate to tell me.
    Hope it helps.
    Thanks,
    Winnie Liang

  • Java Web Start error message when trying to run vSphere1.2 compliance checker

    It installed fine but a javaws usage message displayed when attempting to run. Seems like this might be some kind of Java environment problem on the Windows 7 Pro desktop. Not very familiar with Microsoft, any ideas and/or suggestion?.

    Thanks for your suggestions, I will look into them.
    One assumption I made is since the install completed without incident the program was able to locate any needed resources.
    Another assumption is since I received an error message from javaws then itself was being located - just lacking something else it needed.
    Ran javaws from command prompt, received same usage message. Apparently using 64 bit 1.7.0_13, didn't see a Java folder in the 32 bit Program Files so would that be the problen? That 32 bit Java version is needed to run this?  Java Web State 10.13.3.20-fcs.
    I'm the administrator of the system, so privilege is not an issue
    In Properties/Shortcut, verified that the .jar file was pathed correctly
    Target ->  "C:\Program Files\Java\jre7\bin\javaws.exe" -jar "C:\Program Files (x86)\VMware\VMware Compliance Checker for vSphere\vmcc.jar"
    Start in -> "C:\Program Files (x86)\VMware\VMware Compliance Checker for vSphere\"

  • How do I solve: "Cannot connect to iTunes Store" message

    I get this message: Cannot connect to iTunes Store" after I enter my password. I have already accessed the iTunes store, and have downloaded a music sample, but when I try to make a purchase, I can't because after I enter my password, I get this message. Thus, I cannot complete a purchase.

    Check out these troubleshooting suggestions:
    http://support.apple.com/kb/TS2388
    http://support.apple.com/kb/TS1368

Maybe you are looking for

  • What is tomat and what does it do

    what is tomat and what does it do

  • ESS Personal Information Errors

    Hi All, I want to implement ess mss for Finland country. I can see the country specific iViews in portal content. But as mentioned in business package guide, for Finland country there are no screens for services like personal data, address, bank , fa

  • After system copy sysdba, and dbm user locked in maxdb

    Hi, I have done system copy (SCM 5.0 / LiveCache 7.6), after I have restored maxdb / livecache database, (SYSDBA, DBM) users are locked, I am not able to unlock the user, can someone help me. What is teh way to unlock (SYSDBA, DBM), how can I do that

  • How to make a custom TableModel for ResultSet

    Hi, I am doing my University Team Project using Java and MySQL what would be the best way to implement a custom TableModel for a JTable that shows the data from the MySQL database. I've googled it for a couple of hours but all I can really find is ex

  • Linksys WRT54GS setup issues

    Good day all and sorry if this has been covered elsewhere.       I recently bought a computer off of a friend which came with a WRT54GS router, which I am having issues setting it up.  I have the setup disc version 6.0.  I get to about step 8 and I a