How do I stop the Getting started with Mozilla Firefox page from opening everytime I start Firefox. If I have to see that everytime then I will delete Firefox for good...!!!!

Everytime I start firefox since the last update I can't get the stupid Getting started with firefox page to stop opening up. I downloaded the version 8 and it still opens ..

Well the latest and Greatest Firefox Version 8.0. Won't let me change my home page no matter what I do it always comes back with the getting started page and my orignal home page.
What a piece of garbage it is turning into..!!!!

Similar Messages

  • How I can stop the combo box with list of values from fireing validations

    Hi I'm using Jdeveloper 11.1.2.3.0
    Using Hr Schema employees table
    I Display employees data in af:table
    and I make List Of values on Department_id filed to easy change the employee department
    and another one on Job_id filed
    and Imake them UI Hints as ( combo box with list of values ) in the employeesVO
    the problem is when I Select a value from department or jobs ( combo box with list of values )
    fires the entire filed validations for mandatory atributes
    Note : the af:table Property ( contedelivery) is set to (immediate )
    How I can stop the combo box with list of values from fireing validations

    check it out.,
    http://andrejusb.blogspot.in/2012/09/what-to-do-when-adf-editable-table.html

  • How do i stop the music i put on my iphone from going to my ipod

    how do i stop the itunes i put on my iphone from going on my ipod to

    Don;t select it to sync.
    Each device will only sync what you select

  • How do I stop the "Getting Started with Mozilla Firefox" tab from opening every time I open FF?

    Every time I open FF, the "Getting Started with Mozilla Firefox" tab opens. I have checked and it's not in my homepage list.
    If I open any additional windows, it doesn't open.
    But, once I close all of them and reopen it again, the tab opens.
    I've had a similar problem with a couple addons (ietab) doing the same thing.

    about:config is typed into the address bar as if you were going to a web page.
    It will popup a message warning you that you are messing with important stuff.
    Just agree.

  • How do you stop the flash player when you change pages on a web site

    Hi all;
    I'm building a website in flash using my limited understanding of action script.  Everything was progressing very well until I found that if I go to one of my example pages of my web site and play the flash video (with audio) and click back to my "home" button, the audio will continue to play.  If I go back to the example page, the video is off and when I start the video, it plays again with the other audio.  I hear the audio twice! I know there is an action script to handle this but, I can't figure it out.
    My question is, How do I stop the audio when I click away from the example page back to the home page or any other page?
    Thanks in advance for your help.
    I'm usinf Flash CS4 and a Mac OS operating system.

    The problem is most likely in your Action Script. Therefore this question should be posted in the Action Script forum. This forum only deals with the Flash Player, which, in this case is running the script as it is written, and therefore, working properly.

  • How do I stop the popups every time a new page opens?

    How do I stop the popups? Also, how do I stop the links to certain words: bankruptcy attorney, etc. Each time a page opens there are hyperlinks on words.

    Do a malware check with some malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • How do I stop the "Meet Mozilla Firefox" page from opening in a second tab when I launch my browser?

    Since the latest update, every time I open my Firefox browser, it opens two tabs. The first tab is a "Meet Mozilla Firefox" tab and the second is my Yahoo! homepage. How do I stop the meet mozilla tab from opening and only have my yahoo homepage open?

    Refer to this help article on [https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page?s=home+page&r=0&as=s How to Setup the Home Page].
    If this still doesn't work, do the following:
    * in the address bar type "'''about:config'''";
    * click the button "I'll be careful I promise";
    * in the bar type "'''browser.startup.page'''";
    * right-click on it, and change the value to "'''0'''";
    * re-start your browser.
    Hope this helps.
    Edit: just changed formatting.

  • How  can I stop  the constant in flow of email messages from the Apple Community service site

    How can I stop  the constant flow of emails from the Apple Community Support site

    The user tip below may help.
    https://discussions.apple.com/docs/DOC-3661

  • How do i stop the "update to 6.o" every time i open my firefox?

    every time i open my firefox a download "update to 6.0" appears. tried 'x-ing' out, tried repeated 'no' on the install now and after 12 days of it sick of it. how do i get rid of these? i didn't want 4.0, so why should i want 6.0? i am content with my 3.16. that i have been using and don't wish to change.

    Stop the automatic update for FF!! See in options

  • How do I stop the hyjacking of my custom home page

    Every time I turn on my pc the homepage on my firefox internet browser has changed back to this unwanted page. How do I stop this from happening?

    There is software like Advanced SystemCare with its Surfing Protection feature that can protect files in the Firefox profile folder against changes.
    If you have such software then check the settings or uninstall this software.
    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
    *http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

  • How do I stop the IP address on my Time capsule from changing

    I am running 2 security camera's that run on DHCP. I need to enter my IP address plus the camera name as the URL to view. But the IP address on my Time Capsule keeps changing. How do I stop this from happening?

    Welcome to the discussions, GimpyRich!
    But the IP address on my Time Capsule keeps changing. How do I stop this from happening?
    The IP address is issued to the Time Capsule by your internet service provider and it is normal for it to change from time to time, sometimes daily.
    You should ask your internet service provider if they can furnish you with a "Static" IP address so that the Time Capsule will always have the same IP address.
    If your provider offers this option, there will likely be an additional fee for this service.

  • Photoshop cs6 - How do you stop the "Help Improve Adobe's Products" window from appearing?

    EVERY time I open Photoshop CS6 I get the damn "Help Improve Adobe's Products" box appearing. I've clicked 'Participate' and answered all the questions ... I've pressed 'Do Not Participate' ... many times ! 
    The darn window still opens every time I open PS6 .... driving me nuts!!
    PS ... on a Mac ... in Australia.
    There must be a way of getting rid of it ...
    AND ... further ... on one of my machines ... my Mac Air ... for a while Photoshop CS6 would HANG completely (spinning beach ball) when the "Help Improve Adobe's Products" window opened BUT with no text in the box ... yup ... CS6 hung when the box opened completely empty of text !!
    Would not like that to happen whilst on an assignment 'on the road' !!!
    Plaese advise !!! Thanks

    I am told MacKeeper causes problems. Hopefully you did not install that.
    The only idea remaining is to uninstall/clean/reinstall.
    Let's go over that:
    No need to deactivate, so skip that.
    In your CS6 folder is a shortcut to the uninstaller. I would like you to check "Remove Preferences" when you run the uninstaller.
    When that's done, download the CS-CC Cleaner for the Mac.  Run that.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    As far as your Mac goes, Run Disk Utility on your volume.
    Verify Disk
    Repair Permissions.
    Then reinstall CS6 and updates.
    It's is a "nuke and pave" approach, but if you do not want to be messing with internals you do not understand, it's the best way to go.
    Gene

  • How can I disable the 'First Run' and 'Whats New' pages from showing after updating Firefox for all users that log onto a system.

    I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.

    Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
    Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    * http://kb.mozillazine.org/Locking_preferences
    You can use these functions in mozilla.cfg:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    *http://kb.mozillazine.org/browser.startup.homepage_override.mstone

  • How can I stop the Creative Cloud directory 'crashing' when I save/open files to/from any CC app

    I'm running a Mac 10.9, bags of space and memory, no other problems with it.
    I use Creative Cloud and sync to CC using the prescribed CC method. However if I try to open or save a file to the CC directory from within any CC app, the directory opens for a split seconds and then instantly closes preventing me from completing the action. The only way to get files in and out is by dragging and dropping them from the Finder.
    Can anyone tell me how to sort this problem out.
    Thanks

    Hi D2xS-Shooter,
    I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
    Creative Cloud is a collection of apps with various different tech specs
    http://www.adobe.com/uk/products/creativecloud/tech-specs.html
    Thanks!
    Eshant

  • How do I stop the Atomic Browser on my iPod Touch from allowing websites to automatically load my App Store app?

    I have the Bejeweled Blitz app (for Facebooik) on my iPod Touch 4th gen.  If I want to find gems (special items used in Bejeweled) I have to use a browser (I'm using Atomic Browser) on my iPod so I can grab gems from Facebook's news feed.  What's SUPPOSE to happen is this:
    I set Atomic on my iPod to identify itself as Safari mobile (because the Bejeweled Blitz app on the iPod only recognizes Safari).
    I load my Bejeweled app on my ipod.
    I log into Facebook with Atomic and scan the news feed for gems and click on a gem.Atomic opens a new tab and tries to load the link.My iPod then switches from Atomic to my Bejeweled Blitz app and the gem appears in my game.
    When I'm done with the game, I double click Home and swtich back to Atomic.
    I close the new tab and search the news feed for the next gem.
    HOWEVER, the problem is this:  About two-thirds of the time, when Atomic opens a new tab to load the link, instead of my iPod swtching to Bejeweled Blitz, it opens my App Store app and takes me to the Bejeweled Blitz app download page.  Sometimes the problem occurs when I'm done with my game:  i.e., when I go back to the browser, the iPod swtiches from Atomic and loads the App Store app before I even have a chance to close the tab.  It's a big pain in the neck because it takes a long time for the App Store app to load and when I go back to my Bejeweled Bltz app, it acts like it got dumped from memory and has to restart.
    So... How do I make it so that my App Store app ONLY loads when I personally select the app myself?

    Covered in the settings section of the manual:
    iPod touch User Guide (For iOS 5.1 Software)

Maybe you are looking for

  • How to create an MenuBar that stays at the top of the browser windows?

    We are trying to develop a screen in WDA. It has a menu (UI element MenuBar) at the top. Based on the menu selection it calls a WDA to display below the menu. The requirement is to have the menu bar be stationary. The bottom container (TransparentCon

  • Column name in the database starts with a number!

    Hello, Recently we updated out database and we changed our tables' and columns' names, I'm developing an adf application with EJB3.0 the question is that the new column names start with a number (eg. 001U_ID), its a kind of encoding the names of the

  • MSI VOX TV Tuner

    Ok ppl heres the story Ive just ordered the vox tv tuner and ive then decided to research it, and what ive found out is ive made a big mistake lol, i basicaly was posting to find out if anyone has got  this tv tuner working in the uk? Thanx Baka!

  • RBS maintainance job Orphan cleanup not working

    The problem are that Orphan cleanup won't start up. He starting up. chekcking pools and always stuck on 5 pool. And can delete other pool data. The command I'm runing: > C: cd "C:\Program Files\Microsoft SQL Remote Blob Storage > 10.50\Maintainer" "M

  • Coding for an additional structure in ABAP Query

    I am creating an ABAP query to extract the Purchase Inforecords prices. While linking EINA and EINE Iam able to extract the effective price. When there is a scaled pricing, I want to extract information from KONM or KONW tables. Howeever, can't find