How do I take 300 dpi photos with my iPhone 4s? And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.

How do I take 300 dpi photos with my iPhone 4s?
And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
Your time and assistance in appreciated.
Thanks

Thanks Tonefox!
After looking at a few of the links I found a mathematical equation that assisted me.
Inches = Pixels/DPI
eg: 3 inches = 300 pixels/100 DPI
Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
Width 3264 pix/ 300 DPI = 10.88 inches
Height 2448 pix/ 300 DPI = 8.16 inches
Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
Which is great!
So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
Further clarification will be much appreciated. Thanks

Similar Messages

  • How do I take a screen shot with my iphone 5S?

    How do I take a screen shot with my iphone 5S?

    Press the "Home" button and the sleep/wake button at the same time to take a screen shot.

  • When i take a pitchure verdical with my iphone 5 and send it to my computer e-mal it comes sideways. if i take a pitchure haralzonal it comes ok. if i take pitchure verdical and send text message to another phone it comes ok

    when i take a pitchure verdical with my iphone5 and send it to my e-mail on my computer at home it comes sideways. if i take a pitchure haralzonal and send to my computer at  home it comes ok. if i take a pitchure verdical and text to another phone it ok. is this normal

    Wow. Yes that sounds normal. I'd worry about your spelling instead.

  • How can I take raw image files with my iPhone?

    I want raw image files from my iPhone so that I can process them with ACR.

    The phone only works in one resolution. You cannot reduce it. The back camera has a higher resolution than the front camera. That is in the specifications. You can check the camera information in the User Guide here. http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • My older iPhone which is the 3G or 3S and it's showing an Itune Icon, and doesn't Work. What's wrong with the iPhone 3GS and how to fix it? It was working fine a few days ago

    Starting to wonder if the iPhone's been hacked into. The Iphone was working perfectly fine just a short time ago...only 48 hours ago. I never saw a screen on the front of the front of the phone which showed an iTunes Icon at the top of the screen and a cord going down to the bottom of the screen before. I cannot use the phone, get online to get to the internet, take photos of anything.
      The phone was working perfectly the day it started working very very strangely and I was able to use the phone, see the time of day, take photos, get online, etc.
      How do you fix the phone? I am not going to "restore" the phone & get ALL my info, photos & everything deleted!
      Think we need to change the phone number because we also got a strange phone call from a phone number we never saw before!
       Need some help. as I'm sure people CAN hack into smartphones.

    It's in recovery mode. It's tryijng to tell you to plug it into iTunes and restore it.
    LuvsMacs2014 wrote:
    I am not going to "restore" the phone & get ALL my info, photos & everything deleted!
    I hate to tell you this, but ALL your "info, photos & everything" are already gone.
    You don't have a choice.

  • I have an iMac (800 mb, with O/S 10.3.9) with bookmarks and would like to transfer them to my MacBook Pro, but I have no idea how to do it. Please help.

    Please feel free to contact me directly at [email protected]
    Thanks for your help.

    Use a USB flash drive or connect the two to your home network and use file sharing.
    Note that have a MacBook Pro, not a PowerBook, running 10.6.4. Update it to 10.6.8 - Mac OS X 10.6.8 Update Combo v1.1. You can then install Lion or Mountain Lion so you can use iCloud.

  • How do I delete photos in the photo stream? The images remained despite I removed them on the macbook pro.

    how do I delete photos in the photo stream? The images remained despite I removed them on the macbook pro.

    Open itunes, connect ipod, select what you want on the iphone, sync.

  • How can I take photos with my iPhone and edit them on my iPad?

    how can I take photos with my iPhone and edit them on my iPad?

    Copy Photos Between iOS Devices
    http://tinyurl.com/cnz95bc
     Cheers, Tom

  • My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Help!

    My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Please help !!!!

    Thank you very much for your reply gdgmacguy :) I did all you suggested apart from restore as new device . Didn't know I could do that . After restore I did restore from back up only,  as I didn't want to end up without contacts details on my phone. If I restore as new device how do I get my all contacts? Still will have to use back up? Sorry if it sounds like I don't know what i am doing, i just have no one to ask who would know. Thank you

  • Is it possible to take photos with the iphone when the flashlight is on?

    Is it possible to take photos with the iphone when the flashlight is on?
    When the light is on, it would be great to take photos without flash in dark areas or in macromode.
    How is this possible?

    My idea is using the flashlight permanently as kind of "studio light" to take Photos in macromode:
    Is it possible to take photos with the iphone when the flashlight shines permanently?
    When the light is permanently on, it would be great to take photos without flash in dark areas or in macromode.
    Especially for medical documentation (Dermatology etc.).
    I didn´t found any netsolution.
    This could be an outstanding feature for many people.
    How could this be possible? App-Solution?
    kindly regards
    MilvusMilvus

  • When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

    When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

    Hi there dworthen,
    It sounds like you are experiencing issues when trying to rotate your display. I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Screen does not rotate
    http://support.apple.com/kb/TS3805
    -Griff W.

  • How do I take a thermocouple reading with a pci6025E?

    How do I take a thermocouple reading with a pci6025E? I have seen some postings with scxi-1112 modules which I do not have. I need advice from the ground up. Do I need external circuitry, can I just wire both leads of the thermocouple to Ain0 differential pins, what vis are necessary in the actual programming... If there is an example program or anything else that might seem relavent? I appreciate any help.

    This is most probably a result of multiple factor that make the measurement imperfect:
    - You're not using signal conditioning, so your resolution is definitely very reduced. Any temperature drift in the board could cause a big difference in the reading. I recommend you run your vi for approximately half an hour, unplug the accessory and perform a self calibration. This will have the board at the operational temperature you're expecting and will give you the best results.
    -I personally would recommend using a different sensor type (RTD or Thermistor) as the CJC source, in order to obtain an accurate measurement, otherwise you have a bit of a "chicken and egg" problem, because you're using thermocouple 2 as the CJC for thermocouple 1, but what are you using as the CJC source of thermocouple 2?
    - Are both your thermocouples of the same type and manufacturer? Due to the nature of the thermocouple itself, you can find slight variations between thermocouples from different vendors, due to the purity of the metals used. While this would usually be almost impossible to detect, it might be driving your voltage just enough to be in the next detectable voltage step (again, due to the reduced resolution).
    - I've worked with temperature sensors for a while, and I'd still recommend that you try some sort of signal conditioning in order to increase your accuracy. Even a small amplifier and a passive lowpass filter will do great. I know you said you don't have SCXI, but if you want some lower cost ready to use applications you might consider looking at the SCC Carriers and modules we have.
    I hope these suggestions help. Please let me know if you have any other questions.
    Daniel

  • HOW TO RECOVER MY PHOTO ON MY IPHONE BROKEN and locked with a password

    HOW TO RECOVER MY PHOTO ON MY IPHONE BROKEN and locked with a password?

    I JUST SOLVED MY PROBLEM!

  • I need to minimize the space photos take on my MacBook Pro OSx 10.7.  They are in iPhoto, Aperture, Pictures/Photo Library, etc.  Are they taking space in all of these locations?

    I need to minimize the space photos take on my MacBook Pro OSx 10.7.  They are in iPhoto, Aperture, Pictures/Photo Library, etc.  Are they taking space in all of these locations?

    Are they taking space in all of these locations?
    It depends on how you are using iPhoto and Aperture. 
    iPhoto and Aperture each create their own library files, and the default location for them is in /users/youruseraccount/Pictures
    You can configure iPhoto and Aperture to use the same Library file, in which case your photos are only stored once.  But if you are using iPhoto & Aperture with independent library files, you may in fact be duplicating your storage.
    The second consideration is whether or not you have configured iPhoto and/or Aperture as reference libraries, in which case their library files only reference photos you have stored in other places on your hard drive.  Setting them up as reference libraries does not duplicate the photos inside the library files.

  • How do I forward a text message with the iPhone?

    How do I forward a text message with the iPhone?

    You could take a screen shot (hold and release both buttons simultaneously) and then email the resulting image to someone.
    // crude workaround for now...

Maybe you are looking for

  • Best way to set-up network?

    I have a two-month old MacBook Air (2.13 Ghz, 4 GB) running 10.6.7, an older macbook pro, and a 1 TB Timecapsule. I currently have my iphone synced with itunes on my Pro, but as I am not using that one on a daily basis, I would like to sync to my air

  • Problem with Pages update

    Has anyone had a problem opening pages documents and it telling you that you need to update to the new pages but you already have? 

  • Strange PHP compile issue -- old MySQL client version

    I've successfully compiled PHP 5.2.8 from source on two Xserve G5s running 10.4.11. It seems to run all the web apps fine. But when I look at phpinfo(), it reports that the MySQL Client API version is 4.1.22. Previously, when using Marc Liyanage's pa

  • X-Fi Titanium Champion Series I/O Drive problems

    0X-Fi Titanium Champion Series I/O Dri've problems? This is my final attempt to resolving this before?I request an RMA. I'm really hoping someone can help me figure out if my I/O dri've on my x-fi titanium Ch. Series is defecti've or it's a?software

  • KM Document Expiry Notification

    Hi,   We have a requirement to generate notifications upon the expiry of a document in KM. I am aware that the Lifetime service is available for controlling when a document becomes accessible to users with read-only access. Taking this a step further