How do I turn off the metronome in my final mix?

I used Garage Band to record a live interview that I want to broadcast on my radio show. Unbeknowst to me, a click track was running during the recording. Now the track has an obnoxious click track running behind the vocal. I have turned off the metronome but it still keeps ticking away. Obviously I do not want this click track running behind the interview on the radio. How do I get the metronome to turn off in my final mix?

If the metronome got recorded on your track from a mic with it coming out of your speakers (the only way it could have been recorded) there's no way to take it out. When you say you turned it off, did you just uncheck it in the control menu? Or did you go to the preferences and change its behavior there? I have mine set for recording only, not on playback. But if you turned it off in the control menu, then it should not be present, unless you inadvertently recorded it from your speakers as I described, and it is not going anywhere. This is one reason it is best to monitor your recording with headphones and not speakers, since anything that comes out of them will be recorded with a live mic close by.

Similar Messages

How do I turn off the metronome for playback on iphone?

so I just got garageband for my iphone.
I cannot figure out how to turn off the metronome during playback, or even how to adjust the speed of the metronome.
Help?
Thanks.

jroush1981 wrote:
how to turn off the metronome during playback
assuming the iPad and iPhone layouts are identical, tap the wrench icon in the upper right corner
jroush1981 wrote:
how to adjust the speed of the metronome.
same as above

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
http://support.apple.com/kb/ht4539
Follow those instructions and it will all be taken care of.

How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit our company's needs.
The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our own application-based security module?
2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

hi,
1.You can write your own realm in 61 which can plugged for your security
calls.
2. once you write your ownrealm.. you can access it through weblogic
api/ur api..
thanks
kiran
"Richard Koudry" <[email protected]> wrote in message
news:3dd0d081$[email protected]..
Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit ourcompany's needs.
>
The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
to change their password when these expire after 30 days.
>
Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
the answer we got back, was.
>
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our ownapplication-based security module?
>
2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
these expire?
>
At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
could advise me on how to turn this default security off so that we can
write our own security module.

How do I turn off the annoying voice on Apple TV.

How do I turn off the very annoying voice to come on when I use Apple TV. I did not have this when I first set it up but had to reset the apple tv as my Netflix wa not working?

settings > general > accessibility > off

How do I turn off the requirement to enter my password everytime I want to delete a file in Finder?

How do I turn off the requirement to enter my password everytime I delete a file in finder?

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

How can I turn off the yellow pop-up tool tips?

Howdy,
I have searched high and low in the preferences and found nothing that does the trick. How can I turn off the yellow pop-up tool tips?
See attached screen shot. They are incredibly annoying. It's probably obvious, but I cannot find it anywhere on internets or this forum.
Thanks!

Thanks Nancy. Unfortunately that doesn't do it. I turned those off awhile back. Nor can I find anything under VIEW that seems to make a difference. Just FYI: I'm on a Mac OS w/Dreamweaver CS6 - but this has happened on previous versions of DW. Thanks again.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn- the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign.

How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.

Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

I downloaded the os7 and now I have to sign in ever time I turn on my ipad. How do I turn off the password

How do I turn off the password every time I turn on my ipad. I have the new os7 installed.

Settings, general, passcode lock, enter passcode, turn passcode off.

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

How can I turn off the wireless modem on my HPG5200uk Desktop?

How can I turn off the wireless modem on my HPG5200uk Desktop? I have an ethernet connection, and don't want to be blasted by unnecessary radio waves.
This question was solved.
View Solution.

Hi,
You may not have a wireless network adapter.
If it is not in Network Adapters and you have no Device Manager errors or disabled devices under Network Adapters then that would be the case.
Jaco
Errare humanum est.

How do I turn off the downloads window?

How do I turn off the downloads window? I recently upgraded FF, hated the new one, so downgraded back. When I upgraded I got the new downloads ribbon at the bottom of the screen and no longer had the downloads window. However, for whatever reason I decided to turn the window on. But when I downgraded I realized that this interferes with programs that I had previously set up to download directly to a certain program. Bottom line... I do NOT want the downloads window.

I know you can go to Tools, then Options, and click the Downloads tab and configure how you want it that way. Do you have the Download Manager Tweak as an add on?

How do I turn off the metronome in my final mix?

Similar Messages

Maybe you are looking for