How do I use AO update in the Route signal.vi

Hi support,
My goal is to create a waveform (to buffer it) and output it using the analog card (PCI-6713) N times and with the frequency F. Apperanlty this is done using a (actually 2) digital counter(s) on the PCI-6602 card.
This is done using route signal.vi using "AO update". However I have not managed to get it working. I only get error -10341. So my questions are how do I do it? More specificly how do I use AO update in the Route singal.vi Do I need to conect the cards in any perticular way (cabels or so)? Also do you have more information about how the vi route signal works (the help file does not help me much)?
Grateful for all help.
I'm using labview 6.0 as developpement platform, and using the PCI-6601, PCI-67
13 and a PCI-7344 cards. Since the program is quite large I will only send a portion of it, the pulseGen is supposed to generate the waveform (loaded as a text file, also submitted) the digital output used is in case 1 (in pulseGen) the analog output is in case 3. The MissingWaveform.vi is just to ensure that a waveform is supplied to the pulseGen.vi
Sorry about the mess.
/Chatri

Cabling and Interfacing between Boards: You have capability for direct simultaneous connection between 6713 and 6602 (also 6601) via the RTSI bus, but you need to get a cable to connect between the boards. You can connect between the boards using the I/O pins of their respective signal conditioning hardware. These connections are slower. There are also PFI (Programmable Function Interfaces) connections that are set within the VI's.
All that said, it is not obvious why you want to use the RTSI. You can use the PCI-6713 to generate AO. Presumably you have some signal conditioning accessory; which ever pin of that accessory the AO appears on, you wire it over to the SC accessory for the 6601 and the appropriate pin for the counter gate or
source you want to use.
Suggestions: Don't try to work in the context of your big VI for now. Get the AO bit and the counting bit to work together by themselves. Then shoe-horn them into the big VI. Also, consider a call to the NI help line. They are very good. 800.433.3488 (800IEEE488)
In case you hadn't noticed the DAQ cards and Counter/Timer cards come in different flavors and there are specific example VI's to suit. 6602 uses NI-TIO chip, but PCI-671X are DAQ-STC. Again the NI help people are good at catching this kind of stuff.
Your question is rather large and hard to manage. Perhaps if you break it down into small chunks the advise will be more free flowing.
mike

Similar Messages

  • How can I use Office Update without the Office CD?

    How can I use Office Update without the Office CD? On the microsoft website I've clicked the options which mean I shouldn't need the CD (which wasn't supplied with the laptop), but poartway through updating the service pack I get a request for the Office 2000 Professional CD.
    Any suggestions?

    Hi
    Did you mean a Office or One Note?
    As far as I know the One Note is a part of the Recovering Image and the CD is not delivered with the unit. Furthermore the Toshiba units are not delivered with the Office 2000 software.
    Nevertheless, did you check the update function in the Help i.e. in Word?
    There you will find a options called Check for Updates
    http://office.microsoft.com/en-us/officeupdate/default.aspx
    Bye

  • Can i use time capsule as the router with sky broadband

    how do i use time capsule as the router. I contacted my internet provider  which is Sky who had no info other than to suggest trying a sky forum.

    It depends on the type of modem they gave you.. and if you can bridge it.
    I suspect you cannot use the TC in router mode with sky.. but tell us more.. if it is adsl and they accept pppoe then you can get it to work.. otherwise no.. just use the TC in bridge.

  • HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

    I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

    Thanks Roger W1,
    Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
    This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
    After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
    This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
    The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
    Thanks,
    Jay

  • How do I remove unwanted updates from the App Store?

    How do I remove unwanted updates from the App Store? So you understand better what I'm referring to:
    I have the App Store icon in the Dock. When there's an update a red number appears on said icon. Well, I went to check on the updates and it's for 4 different applications I either no longer have or use. One of them is an update for Lion OS users. I'm still on Snow Leopard, so it doesn't even apply to me.
    So there they sit... I'm not going to download the updates... so how do I get rid of them?

    Hi Andy ..
    no longer have or use
    If there are updates available for apps you have deleted, try this.
    Go to ~/Library/Caches/com.apple.appstore
    Move the Cache.db and Updates files from the com.apple.appstore folder to the Trash.
    Empty the Trash, restart your Mac.
    For any apps you still have installed but do not use, the updates will still be available from the Updates top of the App Store window and show on the red badge on the App Store icon in the Dock.
    edited by:  cs

  • How can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

    how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

    If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.

  • How do I use a variation of the font family OPEN SANS in Adobe Edge Web Font?

    How do I use a variation of the font family OPEN SANS in Adobe Edge Web Font?
    ex:
    <scriptsrc="//use.edgefonts.net/open-sans-condensed:n3,i3,n7:all;open-sans:n3,i3,n4,i4,n6, i6,n7,i7,n8,i8:all.js">
    How do I use the i3 variation in css?
    My css looks like this: font: 16px 'open-sans-condensed';

    Thank you.
    But I want to use the [i3] variation font.
    <scriptsrc="//use.edgefonts.net/open-sans-condensed:n3,i3,n7:all;open-sans:n3,i3,n4,i4,n6, i6,n7,i7,n8,i8:all.js">
    Would look like?
    CSS Selector {
    font-family: open-sans-condensed:i3, sans-serif;
    font-size: 16px;

  • How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone

    How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.

    The following has instructions: OS X Mavericks: Share your Internet connection

  • When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

    When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

    Hello Daijalove97,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    To use your Apple ID at the iTunes Store
    Open the latest version of iTunes.
    Choose Store > Sign In from the Store menu.
    Enter your Apple ID and password, then click Sign In.
    Click Review when asked to review your information.
    Enter your billing information, a credit card will be required.
    Click Continue when you're done entering your credit card and billing information.
    Best of luck,
    Mario

  • How can i use microsoft office on the mAC - what app do i purchase? help?!!

    how can i use microsoft office on the mAC - what app do i purchase? help?!!

    What aspect of Microsoft Office? Office is a suite of programs... Word, Excel, Powerpoint, etc.
    You've got several potential options. Libre Office and Open Office (both googleable) are 'open source,' free, downloadable programmes that will open most MS Office programmes and perform many of the functions of MS Office. Might be an idea to have a look round for reviews (etc) first, to see if they sound like they'll match your needs.
    If you're keen to use the App Store, there's Apple's own suite of programmes: Pages, Numbers and Keynote. They're a word processor, spreadsheet programme, and presentation-type programme with similar functions to Word, Excel and Powerpoint respectively. They're pretty good for most functions, and are better integrated with Macs than MS programmes. They're excellent programmes for what they do, and relatively cheap (about £14 each?).
    But if you're heavily reliant on MS, want ALL the bells and whistles of MS, or need to regularly transfer files between MS programmes on other computers and your laptop / desktop computer, then they might not be the best of ideas. Keynote - IME - can have some difficulties in transferring formatting to Powerpoint.
    Finally, there's MS Office Mac 2011. You can't download MS Office from the App Store, but can order the CDs from most online stores (including Apple's own store). It might be worth price hunting - if you're a student, you can usually find the programmes relatively cheap (£38 at the moment on Software4Students, though you'll need to belong to an academic institution / have a UK .ac email address). Apple's own prices on MS software are unlikely to be the best prices out there (though the product will be identical).
    MS Office includes Word, Excel and Powerpoint in the basic version. The slightly more expensive version (which, I think, is the £38 one on S4S) includes Outlook. Which - IME - is far more of a nuisance than Apple's native Mail programme.
    (I should probably add - I'm an academic. I own both Apple's own programmes, and MS Office 2011. I tend to use the MS programmes more, if only because they're the ones that other people tend to use, and transferring between Apple and MS programmes is a minor inconvenience. Pages also lacks Garamond, my favourite work font. The Apple progs are, however, far more beautifully integrated, and would be MORE than good enough for most users...)

  • How do I use my ipod in the car without it constantly charging?  I have to use a docking cable into the USB port because the 3.5 mm to 3.5mm jack I bought doesn't work on the ipod.

    How do I use my ipod in the car without it constantly charging?  I have to use a docking cable into the USB port because the 3.5mm to 3.5mm jack I bought doesn't work with the ipod (although it does work with an MP3 player).  My ipod is a 5th generation 80GB classic.

    I know this is old - but did you ever get this working. Thinking of getting a 780 ti card and I have an older mac with the mini-displayport too.

  • HT4437 how can i use my labtop on the wed and watch everthing im doing on my tv

    how can i use my labtop on the wed and watch everthing im doing on my tv

    Mirror, if your MBP is early 2011 or later running OSX 10.8 or newer.  If older visit www.airparrot.com, a third party app that works OK, mixed reviews but mine works well.

  • How can I use applet to get the desktop image of client

    hi,I have a question to ask u.
    How can I use applet to get the desktop image of client? Now I develop a web application and want user in the client to get his current image of the screen.And then save as a picture of jpeg format ,then upload it to the server?
    I have done an application to get the screen image and do upload file to server in a servlet with the http protocal.

    Since the desktop image is on the client's local hard drive, you'll need to look at trusted applets first.

  • How can i use my tv as the 2nd monitor

    hi, how can i use my tv as the 2nd monitor, for example pull a video from desktop to tv for windows7, the computer is hp omni 120 all in one. because i have a cable for it that connects to the tv but i dont know how to connect the pc to the tv. i tried to go on the 'change screen resolutions' but that didnt help. thanks

    Hi,
    Here is it specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03343048#N1221
    You can only see:
    Front:
    1 - Screen area
    2 - Microphone array
    3 - Webcam camera
    4 - Stand
    5 - Speakers
    Back:
    1 - Optical disk drive (actually right)
    2 - Stand
    3 - Kensington lock slot
    4 - Power button
    5 - Memory card reader and other I/O on left side
    6 - Motherboard back I/Os (specific I/Os are model dependent)
    7 - Activity indicator
    8 - Power connector
    9 - LAN (ethernet)
    10 - Four USB 2.0 ports
    11- Audio port (actually left side)
    Left:
    1 - Hard drive activity indicator
    2 - Memory card reader activity indicator
    3 - Memory card reader
    4 - Two USB 2.0 ports
    5 - Microphone jack
    6 - Audio port
    Right:
    1 - Optical disc drive
    The only hope is "6 - Motherboard back I/Os (specific I/Os are model dependent)" area:
    Please check area 6 above. As mentioned in my previous reply: Most likely your machine has no video out port.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can i use dsadm to change the ldap port?

    I have a ldap with port 1389,I changed it to 389,now I can not start it because it is a non root user.
    Now I want to change the port back to 1389,but I can not use dsconf because the server is not running.
    How can i do now? How can i use dsadm to change the port?
    Thank u very much.

    My apologies, I didn't mean to be rude/impolite.
    I just wanted to emphasize that in a situation where a Directory Server doesn't even start, you cannot interact with the live server to configure the new port (either talking LDAP or otherwise). All you can do in that case won't be related with the LDAP (that's just the name of the protocol): either assigning network privileges to the user, or changing the Directory Server configuration file.
    The other thing I'd like to outline (and this could take a separate thread ;-) ), is that semantically, I'd prefer talking of a Directory Server instead of an LDAP Server because the former is 'something' providing Directory Services, whereas the latter is just the name of the protocol we use to interact with the server; but this is just my personal opinion, you don't have to agree with me.
    that's all folks!
    marco

Maybe you are looking for