How do I use my computer keyboard instead of a MIDI keyboard to enter notes? In Garage Band I simply go to View - musical typing but there is no such prompt in Logic Pro 7.

Ihave always used my Logic Pro 7 program with a MIDI keyboard for note entry. I do not presently have a MIDI keyboard and wish to use my computer keyboard for note entry. I know this is possible but cannot recall the command to set that up. Can anyone refresh my memory? I know that on Garageband on just need to go to view - musical typing but that is not the command in Logic Pro.

Hi,
Hit the Caps Lock key.
J.

Similar Messages

  • Can I use my computer keyboard as a MIDI keyboard in Logic Express?

    Hello,
    Is it possible to use my computer keyboard as a one-octave piano keyboard (as possible in Garageband) ?
    I'm not ready to shell out for a good keyboard just yet.

    Yes. Not only can you use your computer keyboard by pressing the caps lock key, but you also have the option of using a "step input keyboard," a graphical display of a piano keyboard on which you can input and record notes by clicking with your mouse.

  • HT201178 How do I use the wireless keyboard to edit my iPhone contacts?

    How do I use the wireless keyboard to edit my iPhone contacts?

    Type in the field for first name, last name etc. When you're ready to go to the next field, hit enter/return.

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • How can i use the project code instead of project xml?

    hello
    i use the sessionbean+toplink structure,after i finish the o-r mapping by using the mapping work bench,i generate the project xml file,then in the "session.xml" file,i refer to the project xml,then i can use it from sessionbean.
    i hear that if i use the project code instead of project xml file,it will be more performant,is that true?
    otherwise,how can i use the project code instead of project xml file?i mean, in "session.xml", i can use the "<project-xml>" tag to refer to the project xml file,then in my session bean,i get the server session by read the "session.xml" file.but if i use the project code,how can i refer it from the "session.xml"?the examples that come with the toplink installation only tell me how can i use the project xml file within the session bean,it don't give me any clue about using the project code in the sesion bean,who can give me a step-by-step instruction and code snippet?
    thank you very much?

    There is a slight performance gain during session load at startup but there is no difference at runtime. The choice of which to use is dependent upon you build process. Whether it is easier to submit a new version of the class into the comile build process vs an XML file. In most cases it is just a preference of the development team.
    When you use the project-class you'll need to generate the source code and compile it into your system. Typically it is packaged with the persistent classes. You may need to configure your environment so that the class-loaders have access to these classes (same for the XML case).
    When using the project-class you simply replace the project-xml entry like this:
    <project-class>oracle.toplink.demos.employee.relational.EmployeeProject</project-class>
    The DTD for the session.xml file is found at <TOPLINK_HOME>\core\sessions_4_5.dtd. It is also in the documentation at:
    http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/b10064/a-sessio.htm#634246
    Doug Clarke
    Product Manager
    Oracle9iAS TopLink

  • How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

    How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
    the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
    the TV: LG Smart tv

    The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
    You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
    The times when the query is sent are:
    • at Startup
    • at wake from sleep
    • when the Mac-end of the cable is inserted
    • when using the Option ( Detect Displays ) button in displays preferences

  • HT1727 How do I deauthorize a computer whne the hard drive has crashed and is not recoverable ?

    How do I deauthorize a computer when the hard drived has crashed and is not  recoverable ?

    You cannot directly deauthorize a computer that's not working or to which you no longer have access. You can authorize a total of up to five systems, so unless you've hit that limit it's probably not really important that you deauthorize your dead unit now. If you really want to deauthorize that system now, you can go into your iTunes Store account and there will be a "deauthorize all" button. You can then re-authorize the computers you're using.
    Note that you can only use the "deauthorize all" option once per year, unless something's changed very recently.
    Regards

  • TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

    I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

    What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
    The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
    Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
    If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
    if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
    If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

  • How can I use a downloaded song as an alarm on my timer? Not a ringtone, a song. It is only 30 sec. long.

    How can I use a downloaded song as an alarm on my timer? Not a ringtone, a song. It is only 30 sec. long.

    This is not particularly helpful. I've looked on 3 websites and none of them match my configuration of iTunes. I've gotten as far as creating an AAC file and that is it. Can't find the .m4s designation to change it.

  • How do I get my computer to "allow" a Java upload? It will not even accept the link from your support page.

    How do I get my computer to "allow" a Java upload? It will not even accept the link from your support page.

    Please post a screenshot that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

  • I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items. Help.

    I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items.  What happened and how do I get my mac to rerecognize the device?!?!?

    Hi,
    Check Finder>Preferences>Sidebar, is it checked there to show external drives?

  • How do I make the internal mic on my macbook air sustain better when recording on garage band? I have been recording an acoustic guitar and listening back, the mic seems to pick it up well naturally for 1 or 2 seconds then dramatically drop out.

    How do I make the internal mic on my macbook air sustain better when recording on garage band? I have been recording an acoustic guitar and listening back, the mic seems to pick it up well naturally for 1 or 2 seconds then dramatically drop out.

    I realised that you just need to go to System Preferences > Sound > Input > and uncheck 'Use ambient noise reduction'. mmm answered my own question.

  • Can I use a midi/usb cable to connect to garage band?

    Can I use a midi/usb cable to connect to garage band? Or do I need to buy an interface such as M-Audio. I have the M-TRACK, but haven't connected it yet.

    karbuckle10 wrote:
    Do I need two cables back and forth between the M-TRACK or just one OUT from the piano and IN from the M-TRACK?
    i must confess i haven't checked GBv10, but all previous versions (and i'm guessing GBv10 as well) have only supported MIDI-IN, so all you need is to run the keyboard's OUT to the interface's IN

  • How can I use a USB keyboard with my Macbook Pro?

    My MBP will not recognize my brand new USB keyboard.
    I have tried the keyboard on two other Macbook Air's and it works perfectly.
    My MBP:
    OS X Yosemite
    10.10.1
    Macbook Pro (Retina, 13-inch, Late 2013)
    2.4 GHz Core i5
    8GB 1600 MHz DDR3
    Mac HD
    Graphics Intel Iris 1536 MB
    Thoughts on how I can resolve this issue would be greatly appreciated.
    Thanks,
    Greg

    Brenden,
    Thanks for the reply.
    I've gone your suggestions in detail and the keyboard is still not working.
    From what I can tell this is a known issue with Yosemite.
    https://discussions.apple.com/thread/5676379
    Someone at Apple must be able to figure this one out.
    Greg

  • How do I use my new mac instead of old one with my iphone 4

    I recently just got a new Mac and wont be able to use my old Mac because I will be leaving for college in a couple weeks. My iPhone 4 is set up with my old Mac. How do i get it to sync with my new Mac now instead of my old one? Because of space on my iPhone, I manually manage all of the music on it. When I have my iPhone connected to my new mac, it shows up in iTunes but it wont let me manage my music.

    You can use Migration Assistant to migrate your old Home folder to your new computer. Or, if all you want is your iTunes Library, then copy the /Home/Music/iTunes/ folder to an external hard drive. Then move the external drive to the new computer and restore the folder to the /Home/Music/ folder on the new computer overwriting the one that's now there.
    If you have never started up the new computer, then you can use the Setup Assistant instead of Migration Assistant to transfer your old Home folder to the new computer.
    The two computers must be connected by Firewire cable or Thunderbolt cable depending upon what they both support. The old computer is booted into Target Disk Mode while the new computer is booted normally. In Setup or Migration Assistant you would be selecting the option to migrate from another Mac or disk drive.

Maybe you are looking for

  • Sound output stuck on Airplay on OLD Macbook Pro

    This should not even be possible, since AirPlay is not even available on my late-2008 Macbook Pro...but my system preferences show that sound is being routed to my AppleTV via AirPlay!! I have zero sound coming from my Macbook.  None with speakers at

  • What Size External Drive?

    Have 5 Macs and am getting 3 new ones (retiring two of the old PPCs to the kids - can't run Leopard). Will update the 3 Intels with Leopard, and the new ones will come with it installed. I have external backups for the existing computers (my rule of

  • Manual Condition

    Dear All, We have manual condition in Purchase Order the value for this conditons will be reflected from Ztable. No info record for this conditions. Once after passing the values the values will be cleared                                             

  • Mac book air 4.1 same buttons don´t  work

    the "W", the two, tab button, and the the functions buttons dosn`t work, have you any idea, can you help? I have a new installation, it daosn`t help????

  • How stable is Oracle 11g?

    have some Oracle 9i based databases. These database are used for critical production systems, We are looking to upgrade the databases to newer version of Orcale. I am wondering whether I can upgrade them to 11g (instead of Oracle 10.2.0.x), I find Or