How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
MacBook Pro:
  Vendor Name:    Apple, Inc.
  Device Name:    MacBook Pro
  UID:    0x0001000A17016E60
  Firmware Version:    22,1
  Port:
  Status:    No devices connected
  Link Status:    7
  Port Micro Firmware Version:    FFFF.FF.FF

You are correct, here is what Apple Says:
http://support.apple.com/kb/TS3775
I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

Similar Messages

  • How can I use a windows netbook as a wireless hard drive for a Macbook Pro?

    I have an old Acer Aspire One netbook sitting around and a 2TB WD hard drive that I use with my Macbook Pro 15" running Mavericks. I was wondering if anyone had an ideas how I could wirelessly access the netbook with the WD external HD attached from the Macbook Pro. Furthermore does anyone have any ideas how I can use the netbook as an airplay client so I can stream my Mac, iPad, or iPhone to my netbook which would be plugged via VGA into a TV?
    Any help would be greatly appreciated!
    -Micah

    Download and install the airport utility for windows.. it isn't strictly necessary but the bonjour service makes life easier.
    The request for username and password is correct. Username is whatever you like.. but windows needs it.. so admin.. being the common router one.. password by default is public unless you changed it.
    Now to get the TC to work properly..
    1. The names should be SMB compliant.. by default they are wrong.. use short names, no spaces no special characters.. pure alphanumeric. That is for TC name and wireless names.
    2. Wireless passwords should also be same use WPA2 private.
    3. In the disk sharing page.. manual setup.. put in the windows workgroup name.. ie WORKGROUP.. this helps the discovery process.
    4. In the same area, turn on the guest account to read and write.. not necessary but helps with later versions of windows particularly.
    5. Access the drive by using the direct IP address. ie in Windows Explorer address bar, \\10.0.1.1 (or whatever IP the TC is at).

  • How can I run Mac OS 10.6 on VMware fusion 5 on my macbook pro late 2011?

    How can I run Mac OS 10.6 on VMWare fusion 5 on my late 2011 MacBook Pro?

    Someone has 10.6 running in Parallels, not Fusion under 10.7/10.8
    http://forums.macrumors.com/showthread.php?t=1365439

  • I want to get Windows 8 for my MacBook Pro (late 2011) using Boot Camp, but I have lost my installation disk for my windows. What should I do?

    Please hep me.

    I am fine byuying a copy of WIndows 8 but where would I buy it? Also I was wondering wether I would be able to do this without using a disk, solely online, because my boot camp says insert disk.

  • To use imac 27 late2009 as monitor for macbook pro 13 rethina with thunderbolt cable

    when i us a thunderbolt cable from mac book pro rethina to my imac 27 late 2009 nothing happen, even with command F2 i can not use the imac as monitor for the mcbook pro

    You have got a problem: your iMac does not detect Thunderbolt cables because it has got Mini DisplayPort instead. However, you can use your iMac as a display for your MacBook Pro.
    To do this, you need to get a Mini DisplayPort cable like this one and connect it to your iMac and the MacBook Pro. Then, press Command and F2 keys on your iMac and it will show up as a screen for your MacBook Pro.
    For more information about Target Display mode > http://support.apple.com/kb/HT3924?viewlocale=en_US&locale=en_US

  • TS1367 Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

    Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

    Hello eassic,
    Thanks for the question, and welcome to Apple Support Communities.
    It sounds like Target Display Mode may be what you are looking for:
    Target Display Mode lets you use a Mac as the external display for another “primary” Mac. In some cases, you can also play the sound from your primary Mac on the speakers of the external Mac. For example, a MacBook Pro could use a 27-inch iMac as the display and play its audio on the iMac as well.
    OS X Mountain Lion: Use another Mac as a display
    http://support.apple.com/kb/PH11302
    Use an iMac with Thunderbolt as a display
    If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
    1. Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
    2. Make sure both Mac computers are turned on and awake.
    3. Press Command (⌘)-F2 on the keyboard of the external display Mac.
    4. If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
    Thanks,
    Matt M.

  • Can I use my iMac as a 'display' for my MacBook Pro?

    Hi all, I am really hoping someone can help me here.
    I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
    It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
    My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
    Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
    Any suggestions would be really appreciated.
    Thanks!

    The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
    See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
    One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
    Cheers
    Rod

  • Can I hook use an  older iMac as an display for my Macbook Pro?

    Can I use an older iMac as an display for my Macbook Pro?  The Macbook Pro has the Mini display port and the iMac has the older (larger) display port.  I am trying to have a document open on the iMac while writing a paper on the Macbook Pro.
    Thank you for your time.

    Welcome to Apple Support Communities
    You can use the Mid 2011 iMac as a display for your 2011 MacBook Pro. Both have Thunderbolt, so you won't have any problem > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    Buy a Thunderbolt cable and press Command and F2 keys on the iMac to enable Target Display

  • Can I use my iMac (20" G5) as a display for the MacBook Pro 13"?

    Can I connect an iMac(20" G5) as a display for the MacBook Pro 13"? If yes, what adapters I need? Does it need modification or software for the iMac?

    You need to use ScreenRecycler or a VNC client.
    (49933)

  • I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.

    I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.

    64 bit.
    32 bit won't use all your computer's ram.
    64 bit allows you to run 32 bit programs
    Your computer is 64 bit
    New programs use 64 bit.
    There is no reason to use the 32 bit version of Windows.

  • Macbook Pro late 2011 suddenly slow after months using Yosemite. Never noticed kernel_task until this happened.

    My MacBook Pro late 2011 has recently slowed to snails pace after successfully running Yosemite from a clean install for many months.
    I always have Activity monitor running to keep an eye on memory and CPU.  When the issue started, I noticed Kernel_task for the first time and its 0.5 to 1GB.
    I have verified/repaired the disk and repaired permissions in Safe Mode.  Also done SMC and PRAM resets.
    CPU usage is usually 2% or less unless number crunching in Excel or watching videos.
    I created a new user account, which is much faster in opening Safari and searching.  There is no Kernel_task showing for the new user.
    Cardo-updater is for a motorcycle bluetooth headset.
    Xquartz is for GIMP.
    Rogueamoeba is for Audio Hijack Pro.
    These three have been in use since day 1 of Yosemite and before in Mavericks.
    Etrecheck results
    Oddities - I don't know what the disk info not mounted means.  Not mounting the Recovery disk looks scary to me as uninformed.
    Time machine disk too small - thought I was using a 1 TB drive !!
    Problem description:
    MBP late 2011 has become very slow after a few months after a Yosemite clean install.  Kernel_task memory circa 1 GB.  CPU activity is a few percent.  Created a new user. Activity monitor does not show Kernel_task at all.  Much faster as the new user. Permissions repaired in Safe mode.  SMC and PRAM reset done.  Short hardware test (option D on boot) - no problems.  I have VirtualBox to run XP at times for some Win apps.
    EtreCheck version: 2.1.8 (121)
    Report generated 3 March 2015 10:30:47 am AEDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Late 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 278
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:40:45
    Disk Information: ℹ️
        ST9500325ASG disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Yosemite HD (disk0s2) / : 499.25 GB (290.00 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/VirtualBox
        [loaded]    org.virtualbox.kext.VBoxDrv (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxUSB (4.3.22) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [unknown]    com.cardosystems.cardo-updater.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
        [not loaded]    org.virtualbox.startup.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
    User Login Items: ℹ️
        Activity Monitor    Application  (/Applications/Utilities/Activity Monitor.app)
    Internet Plug-ins: ℹ️
        Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        OfficeLiveBrowserPlugin: Version: 12.3.3 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 4.0.60129.0 [Click for support]
        JavaAppletPlugin: Version: Java 7 Update 75 Check version
    User internet Plug-ins: ℹ️
        WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        DuckDuckGo
        Ghostery
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Yosemite HD: Disk size: 499.25 GB Disk used: 209.25 GB
        Destinations:
            Yosemite [Local]
            Total size: 319.73 GB
            Total number of backups: 10
            Oldest backup: 2014-10-27 14:49:11 +0000
            Last backup: 2015-02-28 00:39:26 +0000
            Size of backup disk: Too small
                Backup size 319.73 GB < (Disk used 209.25 GB X 3)
    Top Processes by CPU: ℹ️
             6%    WindowServer
             1%    cardo-updater
             0%    AppleSpell
             0%    loginwindow
             0%    fontd
    Top Processes by Memory: ℹ️
        155 MB    Finder
        103 MB    WindowServer
        77 MB    CalendarAgent
        77 MB    Spotlight
        73 MB    com.apple.internetaccounts
    Virtual Memory Information: ℹ️
        187 MB    Free RAM
        1.55 GB    Active RAM
        1.38 GB    Inactive RAM
        1.10 GB    Wired RAM
        1.53 GB    Page-ins
        602 KB    Page-outs
    Diagnostics Information: ℹ️
        Mar 3, 2015, 09:48:14 AM    Self test - passed

    Start time: 14:09:53 03/03/15
    Revision: 1273
    Model Identifier: MacBookPro8,1
    System Version: OS X 10.10.2 (14C109)
    Kernel Version: Darwin 14.1.0
    Time since boot: 4:22
    UID: 501
    SerialATA
        ST9500325ASG                           
    CPU usage (%)
        WindowServer (UID 0): 16.8
    Login hook
        /usr/bin/loginfix.sh
    Firewall: On
    System caches/logs
        2.3 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
    Diagnostic reports
        2015-02-07 LegacyFileVaultMessageTracer crash
        2015-02-12 Skype hang
        2015-02-12 com.apple.AmbientDisplayAgent crash
        2015-02-13 CalendarAgent crash
        2015-02-14 LegacyFileVaultMessageTracer crash
        2015-02-19 mdworker32 crash x16
        2015-02-21 LegacyFileVaultMessageTracer crash
        2015-02-26 iTunes crash
        2015-02-26 mdworker32 crash x2
        2015-02-27 mdworker32 crash x2
        2015-02-28 LegacyFileVaultMessageTracer crash
    HID errors: 41
    Shutdown codes
        -62 1
    Kernel log
        Mar  1 12:56:00 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
        Mar  1 12:56:00 VBoxDrv: Failed to open kernel symbols, rc=-102
        Mar  1 13:17:52 rtR0InitNative: warning! failed to resolve special kernel symbols
        Mar  1 13:17:52 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
        Mar  1 13:17:52 VBoxDrv: Failed to open kernel symbols, rc=-102
        Mar  1 13:56:07 rtR0InitNative: warning! failed to resolve special kernel symbols
        Mar  1 13:56:07 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
        Mar  1 13:56:07 VBoxDrv: Failed to open kernel symbols, rc=-102
        Mar  1 13:59:10 rtR0InitNative: warning! failed to resolve special kernel symbols
        Mar  1 13:59:10 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
        Mar  1 13:59:10 VBoxDrv: Failed to open kernel symbols, rc=-102
        Mar  2 10:00:04 rtR0InitNative: warning! failed to resolve special kernel symbols
        Mar  2 10:00:04 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
        Mar  2 10:00:04 VBoxDrv: Failed to open kernel symbols, rc=-102
        Mar  2 10:06:25 rtR0InitNative: warning! failed to resolve special kernel symbols
        Mar  2 10:06:25 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
        Mar  2 10:06:25 VBoxDrv: Failed to open kernel symbols, rc=-102
        Mar  2 10:14:26 rtR0InitNative: warning! failed to resolve special kernel symbols
        Mar  2 10:14:26 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
        Mar  2 10:14:26 VBoxDrv: Failed to open kernel symbols, rc=-102
        Mar  3 09:49:14 rtR0InitNative: warning! failed to resolve special kernel symbols
        Mar  3 09:49:14 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
        Mar  3 09:49:14 VBoxDrv: Failed to open kernel symbols, rc=-102
        Mar  3 12:44:10 Warning: IOSurface 00000066 modified by process com.apple.WebKit using the GPU while surface is write locked by process com.apple.WebKit
        Mar  3 12:44:10 Warning: IOSurface 00000066 modified by process com.apple.WebKit using the GPU while surface is write locked by process com.apple.WebKit
    System log
        Mar  3 11:48:02 WindowServer: WSGetSurfaceInWindow : Invalid surface 828055384 for window 199
        Mar  3 11:48:02 WindowServer: WSGetSurfaceInWindow : Invalid surface 828055384 for window 199
        Mar  3 11:48:02 WindowServer: WSGetSurfaceInWindow : Invalid surface 828055384 for window 199
        Mar  3 11:59:33 WindowServer: WSGetSurfaceInWindow : Invalid surface 829050891 for window 217
        Mar  3 12:09:34 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Microsoft Excel" for over 1.00 seconds. Server has re-enabled them.
        Mar  3 12:52:42 Mail: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar  3 12:52:42 Mail: Invalid window requested in CGSWindowThawBackdrops : 382
        Mar  3 13:11:46 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
        Mar  3 13:12:00 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "System Preferences" for over 1.00 seconds. Server has re-enabled them.
        Mar  3 13:33:56 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Spotlight" for over 1.00 seconds. Server has re-enabled them.
        Mar  3 13:47:48 com.apple.backupd: Error -35 while resolving alias to backup target
        Mar  3 13:47:48 com.apple.backupd: Backup failed with error 18: The backup disk could not be found.
        Mar  3 13:48:13 com.apple.backupd: Error -35 while resolving alias to backup target
        Mar  3 13:48:13 com.apple.backupd: Backup failed with error 18: The backup disk could not be found.
        Mar  3 13:51:26 WindowServer: WSGetSurfaceInWindow : Invalid surface 861039197 for window 342
        Mar  3 13:51:26 WindowServer: WSGetSurfaceInWindow : Invalid surface 861039197 for window 342
        Mar  3 13:51:26 WindowServer: WSGetSurfaceInWindow : Invalid surface 861039197 for window 342
        Mar  3 13:54:47 WindowServer: WSGetSurfaceInWindow : Invalid surface 948771229 for window 189
        Mar  3 13:54:50 sharingd: 13:54:50.400 : SDConnectionManager:: XPC connection invalidated
        Mar  3 14:08:12 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
        Mar  3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
        Mar  3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
        Mar  3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
        Mar  3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
        Mar  3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
    launchd log
        Mar  1 09:06:51 com.apple.xpc.launchd.user.502.100005.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
        Mar  1 09:06:52 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.297, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 09:36:40 com.apple.xpc.launchd.user.501.100019.Aqua: Could not import service from caller: caller = otherbsd.545, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 09:45:11 com.apple.xpc.launchd.user.502.100030.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
        Mar  1 09:45:12 com.apple.xpc.launchd.user.502.100030.Aqua: Could not import service from caller: caller = otherbsd.709, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 09:49:06 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar  1 09:53:20 com.apple.xpc.launchd.user.502.100006.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
        Mar  1 09:53:20 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.296, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 09:56:28 com.apple.xpc.launchd.user.502.100006.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
        Mar  1 09:56:29 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.297, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 12:56:18 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.296, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 13:18:13 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.296, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 13:59:40 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.297, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 14:07:01 com.apple.xpc.launchd.user.502.100020.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
        Mar  1 14:07:02 com.apple.xpc.launchd.user.502.100020.Aqua: Could not import service from caller: caller = otherbsd.477, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  1 14:07:12 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar  1 14:40:11 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar  1 14:40:12 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar  1 14:48:04 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar  1 14:48:05 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar  1 16:28:29 com.apple.xpc.launchd.user.501.100035.Aqua: Could not import service from caller: caller = otherbsd.722, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  2 10:00:24 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.298, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  2 10:06:46 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.300, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  2 10:14:31 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.283, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar  3 09:49:19 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.290, service = com.apple.photostream-agent, error = 119: Service is disabled
    Console log
        Feb 25 16:47:41 fontd: Failed to open read-only database, regenerating DB
        Mar  2 10:00:23 fontd: Failed to open read-only database, regenerating DB
    Loaded kernel extensions
        org.virtualbox.kext.VBoxDrv (4.3.22)
        org.virtualbox.kext.VBoxNetAdp (4.3.22)
        org.virtualbox.kext.VBoxNetFlt (4.3.22)
        org.virtualbox.kext.VBoxUSB (4.3.22)
    Daemons loaded
        cardo-updater
        com.adobe.fpsaud
        com.apple.AccountPolicyHelper
        com.apple.CodeSigningHelper
        com.apple.MobileFileIntegrity
        com.apple.awdd
        com.apple.backupd-auto
        com.apple.cache_delete
        com.apple.cfprefsd.xpc.daemon
        com.apple.cmio.registerassistantservice
        com.apple.coreduetd
        com.apple.coresymbolicationd
        com.apple.ctkd
        com.apple.diagnosticd
        com.apple.icloud.findmydeviced
        com.apple.iconservices.iconservicesagent
        com.apple.iconservices.iconservicesd
        com.apple.ifdreader
        com.apple.nehelper
        com.apple.networkd_privileged
        com.apple.nsurlsessiond_privileged
        com.apple.nsurlstoraged
        com.apple.sandboxd
        com.apple.secinitd
        com.apple.softwareupdated
        com.apple.spindump
        com.apple.systemadministration.writeconfig
        com.apple.systemstatsd
        com.apple.tccd.system
        com.apple.watchdogd
        com.apple.wdhelper
        com.apple.xpc.smd
        com.microsoft.office.licensing.helper
        com.oracle.java.Helper-Tool
        com.oracle.java.JavaUpdateHelper
        com.rogueamoeba.instanton-agent
        jp.co.canon.MasterInstaller
        org.cups.cupsd
        org.macosforge.xquartz.privileged_startx
    Agents loaded
        com.apple.CloudPhotosConfiguration
        com.apple.DataDetectorsDynamicData
        com.apple.InputMethodKit.UserDictionary
        com.apple.MailServiceAgent
        com.apple.cfprefsd.xpc.agent
        com.apple.imdpersistence.IMDPersistenceAgent
        com.apple.internetaccounts
        com.apple.pluginkit.pkd
        com.apple.sbd
        com.apple.secd
        com.apple.secinitd
        com.apple.security.cloudkeychainproxy3
        com.apple.tccd
    User login items
        Activity Monitor
        - /Applications/Utilities/Activity Monitor.app
    Safari extensions
        AdBlock
        - com.betafish.adblockforsafari
        DuckDuckGo
        - com.duckduckgo.safari
        Ghostery
        - com.betteradvertising.ghostery
    Prefetching: Off
    Widgets
        iCal
    iCloud errors
        bird 62
        cloudd 19
        comapple.InputMethodKit.UserDictionary 4
        CallHistorySyncHelper 4
        Safari 1
    Continuity errors
        sharingd 7
    Restricted files: 97
    Lockfiles: 164
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
        - mod date: Jan 31 13:16:59 2014
        - checksum: 297651013
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>10</integer>
        <key>Minute</key>
        <integer>38</integer>
        <key>Weekday</key>
        <integer>2</integer>
        </dict>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
        - mod date: Nov 11 11:07:49 2013
        - checksum: 2451978492
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>org.macosforge.xquartz.startx</string>
        <key>ProgramArguments</key>
        <array>
        <string>/opt/X11/lib/X11/xinit/launchd_startx</string>
        <string>/opt/X11/bin/startx</string>
        <string>--</string>
        <string>/opt/X11/bin/Xquartz</string>
        </array>
        <key>Sockets</key>
        <dict>
        <key>org.macosforge.xquartz:0</key>
        <dict>
        <key>SecureSocketWithKey</key>
        <string>DISPLAY</string>
        </dict>
        </dict>
        <key>ServiceIPC</key>
        <true/>
        <key>EnableTransactions</key>
        <true/>
        ...and 2 more line(s)
    Contents of /Library/LaunchDaemons/com.rogueamoeba.instanton-agent.plist
        - mod date: Mar 25 19:00:08 2014
        - checksum: 3487242040
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.rogueamoeba.instanton-agent</string>
        <key>MachServices</key>
        <dict>
        <key>com.rogueamoeba.instanton-agent</key>
        <true/>
        </dict>
        <key>Program</key>
        <string>/Library/Audio/Plug-Ins/HAL/InstantOn.driver/Contents/MacOS/instanton-a gent</string>
        <key>ProgramArguments</key>
        <array>
        <string>instanton-agent</string>
        </array>
        <key>ThrottleInterval</key>
        <integer>0</integer>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/jp.co.canon.MasterInstaller.plist
        - mod date: Nov 25 22:39:19 2013
        - checksum: 1894334785
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>jp.co.canon.MasterInstaller</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/jp.co.canon.MasterInstaller.socket</string>
        <key>SockType</key>
        <string>Stream</string>
        </dict>
        ...and 3 more line(s)
    Contents of /Library/LaunchDaemons/org.virtualbox.startup.plist
        - mod date: Mar  1 13:56:03 2015
        - checksum: 3094394405
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
            <key>Label</key>             <string>org.virtualbox.startup</string>
            <key>Disabled</key>          <false/>
            <key>RunAtLoad</key>         <true/>
            <key>KeepAlive</key>         <false/>
            <key>LaunchOnlyOnce</key>    <true/>
            <key>ProgramArguments</key>
                <array>
                    <string>/Library/Application Support/VirtualBox/LaunchDaemons/VirtualBoxStartup.sh</string>
                    <string>restart</string>
                </array>
        </dict>
        </plist>
    Contents of /private/etc/ssh_config
        - mod date: Jan 20 11:13:19 2013
        - checksum: 1281775184
         Host *
           SendEnv LANG LC_*
        Host *
            XAuthLocation /opt/X11/bin/xauth
    Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
        - mod date: Nov 11 12:53:23 2010
        - checksum: 1213721873
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.Safari</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
        <string>--sync</string>
        <string>com.apple.Safari</string>
        <string>--entitynames</string>
        <string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>ThrottleInterval</key>
        <integer>60</integer>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Library/Safari/Bookmarks.plist</string>
        </array>
        </dict>
        ...and 1 more line(s)
    Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist
        - mod date: Mar  1 13:56:19 2015
        - checksum: 3654809970
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
          <key>Disabled</key>
          <true/>
          <key>KeepAlive</key>
          <false/>
          <key>Label</key>
          <string>org.virtualbox.vboxwebsvc</string>
          <key>Program</key>
          <string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
          <key>Sockets</key>
            <dict>
            <key>Listeners</key>
            <dict>
              <key>SockServiceName</key>
              <string>18083</string>
              <key>SockType</key>
              <string>stream</string>
              <key>SockFamily</key>
              <string>IPv4</string>
            </dict>
          </dict>
        </dict>
        ...and 1 more line(s)
    Bundles (new)
        /Applications/VirtualBox.app
        - org.virtualbox.app.VirtualBox
        /Users/USER/Downloads/EtreCheck.app
        - com.etresoft.EtreCheck
    Installations
        Office 2011 14.4.6 Update: 14/11/2014 3:29 pm
        Adobe Flash Player: 12/11/2014 7:12 pm
        Java 7 Update 71: 5/11/2014 1:23 pm
        Canon ScanGear: 29/10/2014 5:15 pm
        Adobe Flash Player: 26/10/2014 9:30 am
    Elapsed time (sec): 823

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • Macbook pro late 2011 is on Mac OS X v10.7 Lion and it is using lot of RAM

    Macbook pro late 2011 is on Mac OS X v10.7 Lion and it is using lot of RAM...when I turn on after 2minutes it freezes and do not repond and system prefrences also not working...plz help me....I don,t have mac os disc
    I have tried safe mode boot, NVRAM and PRAM reset but no luck...

    First, try a Safe Mode boot.
    Startup your Mac in Safe Mode
    A Safe Mode boot takes a longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from your Apple () menu.
    If that didn't help, reintall OS X..
    Restart your Mac while holding down the Command + R keys so you can access the built-in utilities in OS X Recovery
    message edited by: cs

  • 27" iMac (refurb, June 2011) not working as an external display for my MacBook Pro.

    I just got a 27" iMac (refurb, June 2011) and it's not working as an external display for my MacBook Pro (not Thunderbolt).  Any idea why?  Command+F2 does nothing.  I am connecting via Belkin Minidisplay Port-to-Minidisplay Port adapter.
    Any help is appreciated...thanks!

    Currently the ThunderBolt iMacs can only be used as an external display by other ThunderBolt Macs.
    http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Apple is very clear about that.
    2009 and 2010 27" iMac with a Mini DisplayPort can be used by other Macs with a MDP-to-MDP cable.
    Stefan

  • Has anyone used a 1.44 usb floppy drive with a MacBook Pro late 2011 model ? I have photos of my children i would like to recover.

    I have photos on 1.44 floppy disk and would like to copy them to DVD, has anyone used a 1.44 usb external drive with a MacBook Pro (late 2011)? The disk where made on a PC from 1990 -94 the images are in .img and .jpg. 

    Hello riflemanpro,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    Have a nice day,
    Mario

Maybe you are looking for