How do I use my Intel iMac to see the screen on my old G5

The screen on my old G5 is fading fast and I would like to connect it to my newer Intel iMac and use it's screen to be able to see what i'm doing. Is there a way to do that?

Fortunately I was just able to make out the Screen Sharing check box on my older Mac. As soon as I checked it and opened the file on the newer Mac there was the screen. Perfect. Thanks so much.

Similar Messages

  • I just replaced the power supply in my Intel imac and now the screen is really really dark and I see the missing folder icon, what do I do?

    The power supply in my Intel iMac went out (and smelled pretty burned) so I replced it and now when I start it up the display is so dark I can hardly see it and it shows the missing folder icon. Is it the inverter? Or if shine a flashlight on it and re-install the OS will changing the display settings maybe fix it?

    Thanks for ur quick reply to my problem. I tried all of that with no results... I did notice tho that the lights next to and above my caps lock key and my num lk key are now flashing. They flash in unison three times then there is a two second pause then they flash three more times and this repeats. They may have been doing this before I tried this solution but I did not take notice until now... I was also wondering how I am supposed to know, after pressing f10 to enter bios, how I can tell if my new drive is being detected when my monitor will not function? Was pressing f10 supposed to possibly make the monitor turn on? In a last ditch effort to try and further identify the problem, I re installed my old drive. Before replacing it my computer would begin to boot then display a hard error that would not allow me to continue booting and run Windows. My display would still work but I could not run Windows. After re installing the drive the monitor will not turn on. I'm beginning to think that I have a bad monitor. Is there a way of testing this with out buying one? Where does the monitor connect to the mother board? I wonder if maybe its been jarred loose, although I highly doubt it, it may still be worth looking at. Thanks again for your advice.
    Casey

  • How do I synchronise my Intel iMac's SPDIF audio input to an external clock source?

    How do I synchronise my Intel iMac's SPDIF audio input to an external clock source?
    I have a Focusrite ISA One microphone pre-amp with digital ADC card fitted. Both devices are set to 24 bit/44.1kHz and connected by Optical cable (from ISA One to iMac's optical SPDIF input)
    I've tried to get the iMac to slave to the ISA One's digital clock by looking in the Audio MIDI set-up but cannot get it out of 'Default' mode. Focusrite tell me it needs to be 'Locked' in the Mac but I can't see how to do that.
    The Mac recognises when I change the ISA One's sample rate because Pro Tools gives me an alert, which would suggest that it's receiving data. But all I am hearing on the input is digital white noise.
    Any ideas?
    Cheers!

    USB and FireWire work in very different ways, so there is no adapter.
    Instead, you should just get a USB 2.0 hub, like this one
    http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
    There are many choices, but be sure to get one that is powered (it comes with its own power supply).  Cheaper hubs rely on the computer's USB port for power.

  • Intel Imac stuck at white screen and 3 beeps sound continously....

    Intel Imac stuck at white screen and 3 beeps sound continously when power on. Pls help......

    Well Barry, as for the Ram, all this while are install by apple technician since very day i bought iMac on july 2008. Just wondering What's actually went wrong..
    Very first day I bought iMac, few days later, system cant even on. AppleCare Centre exchanged a new set of iMac.
    two weeks later, i notice several dead pixels appearing on screen, call to log a case with them, later on, they changed a new panel.
    After several months pass, been using happily with iMac... but since now, this problem occurs. So fastrating... My third time encounters problem with iMac. sign
    Any suggestion? If not, I guess i have to bring this bulky iMac to applecare centre again. sign

  • I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

    i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

    i inherited the website. It’s for a non-profit and is not very
    sophisticated, and neither am I in webdesign. It currently has multiple
    pages that are identical except for that body section, so whenever i change
    the navigation (in the sidebar) I have to update every html page.  I want
    to have one basic page, and just call in the different body content based
    on the link the user selects from the nav bar. How can i do that using a
    script? i am using Dreamweaver.
    ~ in love and light ~
    Jeannie
    On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

  • How do i use my apple express speakers as the sound from apple tv?

    how do i use my apple express speakers as the sound from apple tv?

    Welcome to the Apple Community.
    You can't with the Apple TV 2 or 3, with the Apple TV 1, you can choose them from the Airtunes option in the settings menu.

  • When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

    When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

    Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
    If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

  • How to make use of adjacent data elements within the same buffer

    Hi,
             Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
             Here I also attach my VI showing what I did.
        Thank you very much in advance,
                            Suksun
    Attachments:
    wheel_encoder_1.vi ‏98 KB

    Hi Suksun,
          I hope you'll forgive me for distilling your code - mainly to understand it better.  I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array.  As in your code, the last velocity is being paired with the first position.  If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
    cheers
    Message Edited by Dynamik on 01-07-2006 03:17 AM
    Message Edited by Dynamik on 01-07-2006 03:19 AM
    When they give imbeciles handicap-parking, I won't have so far to walk!
    Attachments:
    encoder2.GIF ‏14 KB
    encoder2.vi ‏102 KB

  • How do I use dual displays to have a full screen app on one monitor and another full screen app or the desktop on the other?

    How do I use dual displays to have a full screen app on one monitor and another full screen app or the desktop on the other?
    I want to have my itunes visualizer on my TV which is connected via HDMI adapter, and still have access to full screen itunes and my desktop on the main display.
    Any suggestions?  App downloads that can do this?  Please let me know.

    You can't do it.  This has been an issue since Lion.

  • I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

    i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

    Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

  • I have Adove Reader XI. All my files have a picture as the first page. I used to be able to see the picture for each file. Now all I see is the PDF logo. How can I change this so I can see the pictures instead of the logo?

    I have Adobe Reader XI. All my files have a picture on the first page. I used to be able to see that picture but now I can only see the PDF logo. How can I change that so I can see the pictures instead of the logo?

    Windows 7

  • How do I set up my iMac g4 to the Internet?

    How do I set up my iMac g4 to the Internet?

    http://docs.info.apple.com/article.html?artnum=106748 Mac OS X: Troubleshooting a dial-up/PPP Internet connection 
    http://docs.info.apple.com/article.html?artnum=106749 Troubleshooting a cable modem, DSL, or LAN Internet connection

  • How do I use a gift card bought in the Netherlands here in Canada

    How do I use a gift card bought in the Netherlands here in Canada

    Hi ..
    Sorry, not possible. A gift card purchased in one country cannot be redeemed in another.
    Purchasing an iTunes Gift Card for use in another country

  • Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

    Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
    I use a lapto (windows 7) 64-Bit operating system.
    Thank you,
    my email is: [email protected], if you send me the answer to my query

    You need to activate Photoshop.
    Mylenium

  • HT4427 how do I use a song from iTunes as the ringtone for my iPhone 5?

    how do I use a song from iTunes as the ringtone for my iPhone 5?

    Google will find several free ways to create ringtones for iphone.

Maybe you are looking for