How do I use my MIDI controller to change PedalBoard in LP9?

I'm not exactly sure how to phrase this, so I'm to just go for it & then try my best to narrow things down, clarify & define.
I'm using Logic Pro 9 & Pedalboard (VERY cool). I've read the "manual" on it, but still can't figure out how to get my controller to run it. Basically, I have a Behringer FCB1010, that has been modified. It has 2 rows of "buttons", the bottom row now works like a regular stop box (it looks a LOT like Pedalboard actually) & there are two pedals. One pedal sends CC7 (Volume) the other pedal sends CC4. I use that one for a Wah Wah. The FCB1010 is programmed to send ONLY on MIDI Channel 16 (I set it that way).
The bottom row of 5 buttons are programmed as:
Button 1 => CC26
Button 2 => CC27
Button 3 => CC28
Button 4 => CC29
Button 5 => CC30
How do I (or can I) get say a Distortion Pedal in the first position of PedalBoard to respond to my Button 1, that's sending CC26, so that it can toggle the state of that pedal (turn it on / off)? Then, I'd like to do the same with the next several pedals on PedalBoard & use my pedals to run the Wah Wah pedal in PedalBoad.
Also, I have 2 keyboards (a Korg & a Kurzweil) running on different MIDI channels. I use them to trigger plugins. I've been able to figure out how to get each to play one plugin or both to play the same plugin, but is there something I can set so that when the keyboards send CC7, it goes to the plugin & does NOT get picked up by the Mixer? Right now, when I try to change the volume of a plugin, it turns down the fader for whatever channel on the mixer is associated with it. I JUST want it to run the plugin & bypass the Mixer if possible.
I'm sure this is a VERY confusing explanation of things. I apologize in adavance. PLEASE ask questions so that I can help to formulate a clearer picture of what the XXXX I'm trying to say & do here.
THANK YOU FOR HELPING!!!!

i inherited the website. It’s for a non-profit and is not very
sophisticated, and neither am I in webdesign. It currently has multiple
pages that are identical except for that body section, so whenever i change
the navigation (in the sidebar) I have to update every html page.  I want
to have one basic page, and just call in the different body content based
on the link the user selects from the nav bar. How can i do that using a
script? i am using Dreamweaver.
~ in love and light ~
Jeannie
On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

Similar Messages

  • How do i use one midi controller and ignore another in Mainstage 2.1?

    I am running Mainstage and Ableton Live in parallel and use two midi controllers. I would like the APC40 to just be recognized by Live, and my MPK49 to be recognized by Mainstage and Live. Right now, I get midi signal from Mainstage on both midi controllers and can't seem to figure out how to assign just Mainstage to just get midi input from the MPK49. Any ideas? Thanks.

    Yes, that worked a the device popups were set to all. Fixed that and moved on. Thanks! However another similar problem has come up...
    The sliders on the APC40 (which I just want to be recognized by Live), are affecting the Mainstage Channel Strips volume sliders. I can't seem to figure how to make Mainstage ignore this as all of the APC40 sliders are effecting Channel Strip 1. Thanks.

  • HT4106 How do I use a midi keyboard on GarageBand with my iPad? When I try it says the device cannot be used as it requires too much power.  However, I have given the midi it's own power source.

    How do I use a midi keyboard as an input device on garageband? Its an oxygen 61 board.  I'm using an iPad camera connection kit and a separate power source for the midi but each time it says it cannot use the midi as it requires too much power. 

    I have the same problem with my iPad and 61. Sometimes it says device not supported and sometimes it rants about power - any solutions anyone ?

  • Is it possible to edit parameters of an object in the environment using a midi controller?

    Is it possible to edit parameters of an object in the environment (such as the key parameter of a chord memorizer) using a midi controller?

    Anyone know what I can do? Maybe even some kind of setup in the environment that will do this?
    Thanks

  • I'm creating live video effects using a midi controller

    I am creating live video effects using a midi controller on a mcabook.The final destination for the video content is an ipad app which uses the built in iPad camera to capture video. I want to "trick" the ipad into "filming" the video from the macbook with the effects. Does anyone have any ideas - software orhardware solutions are all viable. The ipad accepts audio through an Alesis iODock. I really be looking for a software solution which will over ride the built in camera on the ipad and accept a feed from the Macbook.

    You can't override the physical camera and substitute the macbook camera.
    You could find an app or write one that would have the macbook stream the video over wifi from the macbook to the iPad.

  • I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

    i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

    i inherited the website. It’s for a non-profit and is not very
    sophisticated, and neither am I in webdesign. It currently has multiple
    pages that are identical except for that body section, so whenever i change
    the navigation (in the sidebar) I have to update every html page.  I want
    to have one basic page, and just call in the different body content based
    on the link the user selects from the nav bar. How can i do that using a
    script? i am using Dreamweaver.
    ~ in love and light ~
    Jeannie
    On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

  • How can I use srvctl command line for change "Failover type" and "F method"

    Hi all,
    I am using Oracle One Node (11.2.0.3), and I have a service:
    /u01/11.2.0/grid/bin/srvctl config service -d orcl
    Service name: orcldb
    Service is enabled
    Server pool: orcl
    Cardinality: 1
    Disconnect: false
    Service role: PRIMARY
    Management policy: AUTOMATIC
    DTP transaction: false
    AQ HA notifications: false
    Failover type: NONE
    Failover method: NONE
    TAF failover retries: 0
    TAF failover delay: 0
    Connection Load Balancing Goal: LONG
    Runtime Load Balancing Goal: NONE
    TAF policy specification: BASIC
    Edition:
    Preferred instances: orcl_1
    Available instances:
    I would like to change "Failover type" and "Failover method" to:
    Failover type: SELECT
    Failover method: BASIC
    How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
    Thanks in advance.
    Leonardo.

    user10674190 wrote:
    Hi all,
    I am using Oracle One Node (11.2.0.3), and I have a service:
    /u01/11.2.0/grid/bin/srvctl config service -d orcl
    Service name: orcldb
    Service is enabled
    Server pool: orcl
    Cardinality: 1
    Disconnect: false
    Service role: PRIMARY
    Management policy: AUTOMATIC
    DTP transaction: false
    AQ HA notifications: false
    Failover type: NONE
    Failover method: NONE
    TAF failover retries: 0
    TAF failover delay: 0
    Connection Load Balancing Goal: LONG
    Runtime Load Balancing Goal: NONE
    TAF policy specification: BASIC
    Edition:
    Preferred instances: orcl_1
    Available instances:
    I would like to change "Failover type" and "Failover method" to:
    Failover type: SELECT
    Failover method: BASIC
    How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
    Thanks in advance.
    Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
    Also see
    11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

  • Using a midi controller with Amplitube and Logic 9

    Hi all
    I'm stuck as helll at the moment can someone please help???
    I'm trying to use my Line 6 x3 live as a MIDI controller for amplitube (whilst this is being used as a VST plug-in) for Logic 9.
    Heres my setup.
    Line6 x3live connected by USB and midi IN and OUT to a Focusrite Saffire USB - connected by USB to my IMAC (27 inch standard spec) and running this on logic 9 with Amplitube as a VST.
    If any one can provide a step by step guide i'd be bloody grateful.
    Thanks

    Unfortunately there is no way to use the remaining knobs, sliders and buttons on your Axiom. My work around was to buy the Korg NanoKontrol. It is a cheap controller with knobs, buttons, sliders and transport controls that integrates perfectly with GB. There is a little plugin on the Korg site to DL and install to use with GB so you don't need to use the garageremote with your axiom.
    Cheers.

  • How can I use two midi keyboards to control two different patches?

    I would like to use two midi keyboards in my setup, each controlling a different patch or track.

    Hi,
    Follow the steps in this guide:
    http://www.logicprohelp.com/forum/viewtopic.php?f=5&t=32201
    J.

  • How do I use a xbox360 controller in labview 7?

    So I've just been given a project in my research lab..
    We have to control a gantry arm using labview.  The gantry control is already completely written out in labview using a datasocket server.  However, I've never worked with Labview before.  All I know is that it takes in a number as a velocity and it moves the arm according to that velocity.  What I have to do is use the xbox 360 controller to input that number (a velocity), as well as calibrate it.  If possible, using the mangitude of the joystick angle to input a different velocity.
    How would I go about doing this?  I hav einstalled all the necessary software to talk to the controller, but I don't know how to set it up in Labview.
    Also, Windows XP sees it as a game controller, if that makes any difference.
    Message Edited by ShadowGray on 08-13-2008 10:56 AM

    You cannot connect those two nodes directly because they're different datatypes, as the message indicates. The axis info contains 8 elements. Thus, you have to pick the one that applies to you and unbundle it from the cluster. For example:
    To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
    Message Edited by smercurio_fc on 08-13-2008 01:08 PM
    Attachments:
    Example_VI_BD.png ‏1 KB

  • How can I use one motion controller to control two robotic independently?

    the help document says :
    Note  Configuring and clearing buffers is a processor-intensive operation on the motion controller that requires the allocation and deallocation of memory. You should configure and clear buffers only when motors are not moving and onboard programs are not running. For example, if you wish to execute three simultaneous contouring operations on axis 1, axis 2, and vector space 1 (with axes 3 and 4), you should first configure all three buffers before starting any of the operations. You can start the contour operations independently, and at different times, but should wait until all operations are complete before clearing any of the buffers.
    and i tried to conduct two contouring operation on two vector space. and tried to clear or configuring buffer for one vector when another one is still moving. so that i can start or end the movement at any time i want,and  it is ok.no error. but when i tried add a buffer  breakpoint output along with each vector movement. the bp doesn't work if the other vector is running . is there anyway to solve this problem.

    I think you've misunderstood what the dns attribute is for. The dns attribute returns the hostname of the client accessing your website, not the hostname of the website that linked to your website.
    For example, when someone using the Comcast ISP goes to a malicious website at example.com that loads images from your website at www.amigoo.net, the dns attribute will be something like "c-1-2-3-4.ca.comcast.net", not "example.com". ACLs are used for authentication and authorization of clients (not the websites those clients chose to visit), and they don't provide the functionality you're looking for.
    If I understand correctly, you want to prevent websites other than amigoo.net from linking to files in your d:/webserver/imat/pics_upload directory. You can achieve this adding the following lines to your obj.conf configuration file:
    <Object ppath="d:/webserver/imat/pics_upload/*">
    <Client referer="*~*amigoo.net">
    PathCheck fn="deny-existence"
    </Client>
    </Object>

  • How do I use my mid 2010 iMac as display with mid 2011 macbook pro?

    I have a mid 2010 iMac and I want to use it as a display for my mid 2011 macbook pro.
    The iMac has a mini display port and the macbook has a thunderbolt port.
    Does anyone know if this is possible and what I need to make it possible?
    Cheers!
    -Sean

    If the iMac is a 21-inch model, you need to use a product such as ScreenRecycler over a network.
    If the iMac is a 27-inch model, click here and follow the instructions.
    (121706)

  • How can I use iMac mid 2007 24" 2.8GHz as screen for Xbox

    I am about to buy a new Xbox with Kinect. I would really like if there was some way I could use my iMac as a screen with it. There is not a lot of space in front of our TV, so playing (and jumping etc) in front of the mac will be ideal. I have searched around and havent really got an answer. I guess the Belkin AV360 only works with the 2010 27" iMac and the mid 2007 iMac does not have any dvi in ports. I am not sure if the EyeTV Hybrid in game mode would do the job? Has anybody used it to connect xbox/ps2 etc?
    I have thought of getting another LCD for it, but there just isnt enough space in our small apartment for another tv.
    Any suggesstions would be appreciated.
    Many thanks

    Short answer, you cannot.
    Dah•veed

  • How do I use my midi keyboard with iPad?

    I have an Axiom keyboard that requires external power ... Even when I connect the external power chord and then plug it into the ipad using the camera kit, it says that it draws too much power for the ipad ... Is there anything I can do? Thanks!

    http://imageshack.us/photo/my-images/689/ipad2anymidi.jpg/

  • How do i use WGM or dcsl to change the primary groups of users, defined by another group?

    i've got a ton of users, whose primary group is "current student". they all belong to the other group "year 13"
    they've left school, so i thought it would be easy to do a search of users with GID equal to or containing the GID for "year 13" (in this case 1121) and then change their primary group to "left school"
    except that doesn't work. i can only search for them in WGM by primary group, it seems. therefore i cannot do any batch operations on a secondary group.
    so. how do i do this? is there a way of scripting dcsl to find users by 'other group' and then change the primary group attribute?
    i'm going to need to be doing a lot of this (changing the other gropus of a school full of students). bit stumped.
    help!

    ok. for some reason neitehr root nor my account (which is part of the open directory admin group) can make changes using dscl.
    when addingremoving users from groups, remember that teh UUID has to be added/removed too
    this is getting there:
    old=year11
    new=year12
    for item in `dscl /LDAPv3/127.0.0.1/ read /Groups/$old GroupMembership | cut -d: -f2`
    do
    echo $item
    UUID=`dsmemberutil getuuid -U $item`
    case "$UUID"
              in
              "There is no uuid for user $item")
                        echo "user $item need personal attention"
                        dscl -u diradmin -P 'somepassword'  /LDAPv3/127.0.0.1 append /Groups/$new GroupMembership $item
                        dscl -u diradmin -P 'somepassword'  /LDAPv3/127.0.0.1 append /Groups/$new GroupMembers $UUID
                        if [ "`dsmemberutil checkmembership -U $item -G $new`" == "user is a member of the group" ]  ; then
                        echo "$item added to $new"
                        dscl -u diradmin -P 'somepassword'  /LDAPv3/127.0.0.1 delete /Groups/$old GroupMembership $item
                        dscl -u diradmin -P 'somepassword'  /LDAPv3/127.0.0.1 delete /Groups/$old GroupMembers $UUID
                                  if [ "`dsmemberutil checkmembership -U $item -G $old`" == "user is a member of the group" ]  ; then
                                  echo "removal of $item from $old failed"
                                  else
                                  echo "removal of $item from $old succeded"
                                  fi
                        else echo "append of $item to $new failed"
                        fi
              esac
    done

Maybe you are looking for

  • Vs 2013 community screws up formatting of html page when saving file

    I have seen other people having this issue with suggestions like 'Formatting and visualizations, tag specific options. However this is not solving my issue example I type the following code this way <asp:Panel ID="Panel1" runat="server"> <asp:Label I

  • Usage of Different Prompt based on Users Role in OBIEE

    Hi I have a requirement(OBIEE Reports) as below. The Dashboard page will have a Prompt(Drop Down) Say for Geography where it will list all the countries available.When a global user(Role) logs in to the application he should see all the list of avail

  • I can't get videos on my ipod classic

    hey sorry i'm quite new at this, but i'm having a little trouble with my ipod classic. i can't seem to copy video files from my computer to my itunes and then to my ipod. there's one music video that did get on my ipod but i don't know how or why it

  • Automating Business Rules

    I am trying to use the CmdLnLauncher utility in a .bat file to run business rules with run-time prompts. The problem is I cannot get the launcher to run when the variable I am trying to pass in through the run-time prompt has a space or "-" character

  • Connecting BI

    Hi, we got BI installed on our system and would like to integrate it to the portal. Therefor I created a new webtemplate with Web Application Designer. The problem here is that I get an errormessage when previewing or saving that template: Java Comun