How do I use Thunderbird to send third-party email through Verizon SMTP?

What exact settings do I need to select in Thunderbird for outgoing email in order send email? I have a third-party email address, not Yahoo or Verizon.
Based on other posts, I have set:
server name: outgoing.verizon.net
port: 587
CHECKED 'use name and password'
username: entered verizon username
use secure connection: 'no'
When I try to send email, I get prompted for password multiple times, then ultimately get "Send Message Error" - 'Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.verizon.net failed...'

Your verizon.net password is not necessarily the same as your .com password. I have downloaded Thunderbird and tested send/receive using the verizon.net outgoing server and it works just fine, so it is something in the settings you are using.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

How can I use Drupal as a third party CMS with ATG E-Commerce Application?

Hi Friends,
We are planning to use a third party Freeware Content Management System (CMS) for web site content in ATG E-Commerce Application, instead of ATG content Administration or merchandising.
Can anybody please let me know how can I use a third party CMS(Eg: Drupal) with ATG E-Commerce Application?
Regards,
Krishna.

I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041. It compares Today to the vacation elig. date and if they match, set a time type indicator to 1. I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours. Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage. In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.

Cannot send or receive email through Verizon server after Thunderbird update

After updating Thunderbird, Verizon server no longer recognizes my password, so authentication keeps failing. I can neither send nor receive email. Account settings are correct. Any ideas? Thanks.

Are your server settings set to
Server pop.verizon.net
Port 995
Connection security SSL

How can I use iCloud calendars for third party webapps?

Hi, I thought of having my calendar on a page, where I also type in my AppleID and then be able to read (and write) new calendar-entries.
Is that possible? If so, how?

iCloud calendars are just industry standard CalDAV calendars, so assuming you have the programming knowledge to use the CalDAV protocol you can read/write to iCloud calendars.
These links may point you in the right direction:
http://www.quora.com/Will-Apple-iCloud-also-publish-an-API-to-read-write-the-cal endar-data
http://stackoverflow.com/questions/9751255/apple-icloud-calendar-api
Apple also has a specific iCloud section of their Developer site, but you need to be a registered developer to access it:
iCloud for Developers - Apple Developer

Verizon server timing out when using Yahoo to send and answer emails from Verizon user

A friend uses Yahoo for his email even though he is a Verizon customer. Frequently when he sends or responds to emails from my Verizon email account, he gets Failure Notices saying that the "Verizon Server is unavailable for too long". How can this be fixed short of saying "stop using Yahoo"?

The Yahoo/Verizon issue happens when Yahoo blocks Verizon's servers or vice-versa, and is usually cleared up within a day or two.
You can report it to Verizon if you want, but odds are they're already aware.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Help!!! Entourage 08' At&t Uverse Third Party Email Setup

I have a macbook and use Entourage 08' for my emails. I started a new job today and am trying to add my new work email address to entourage. I have tried everything, read every forum, and even my IT guy at work cannot figure it out. I can use either POP or IMAP and would prefer IMAP. How do I set up this new third party email because I have Uverse as my internet provider and do not want to pay the Techconnect fees? In the meantime, I am being forced to use webmail. Any thoughts or help at all?

AT&T U-Verse (uverse), as of July 2014, requires that you verify your non-AT&T mail accounts before they allow you to send outgoing non-AT&T mail.
Here's how to verify your non-AT&T mail accounts and link them to your AT&T U-verse account
https://discussions.apple.com/message/22291865
Log into your AT&T U-verse webmail att.net email account (e.g. Yahoo mail)
> click the gear at upper right of screen next to your name
Navigate to Settings > Accounts > Add
Add your non-AT&T mail accounts/ Enter info they require
U-verse will send a verification email to those mail accounts.
After you reply and verify your identity, you will be able to send outgoing email for those accounts via Mail, so long
as you have Mail configured.

How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100 format) out the serial port of my computer?

I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?

If I recall, CTRL-D is EOF on most ASCII tables.
You'd probably have to use an escape sequence
or if you can use an unsigned 8-bit that might be
easier.
In article <[email protected]>, TLS
wrote:
> How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
> format) out the serial port of my computer?
>
> I am trying to write a vi that interfaces with a piece of OEM
> equipment that is set up to talk with a VT 100 terminal. I can't seem
> to locate the ASCII equivalent string (if there is such a thing) of a
> CTRL D. Is there a vi that emulates VT 100 commands?

HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION

HI expects,
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.

Hi,
In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
IDoc supports only Async communication and in Sync case performace is good using Proxy.
In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
Thanks
SaNv...

Can i use technical system type 'third party' for r3 system in idoc2file sc

Hi,
i am doing a sample out bound scenario (idoc 2 file), distributing idoc from sap system to csv file (in same network). in this can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
can any one suggest me,........ Thanks in advance & would be appreciated.
Regards
Rajesh

Hi,
<i> can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.</i>
--- No u can't use this...Ur technical system must be "WebAS ABAP" only. For file system you use 3rd party system. means ur technical system like follows.
sender
R/3 -- WebAs ABAP
Receiver
File - 3 rd pary system
<i>And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.</i>
Click "Clear SLD cache" repeatly for some time in ID, it will come.
regards,
Ansar.

Sending Data from BI to Third Party System through CIB Interface

Hi Experts ,
We have a requirement where we need to send data from BI to any Third Party System through CIB Interface . We do not have to use the OHD's . Please share the documents for the same .
Regards
Garima

Hi,
My problem is solved.
Sol: Getting wrong data from third party sytem. They are adding spaces in front of the payload and end of the payload so it was not processing. After deleting that spaces its is working fine.
Thanks for your help.
Thanks & Regards,
Purshothamm

Need to extract PO's to send third party system

Hi,
I need to extract Purchase orders with the following criteria. I need to extract them based on vendor, Purchase Org and date of creation of PO
1. PO with no GR and IR
2. PO with no IR
3. PO with no GR
I need to extract the PO's as mentioned above as we need to send third party system. Please let me know is there any standard reports available to extract.

Hi,
Explore t-code ME2L.
You can filter using the field Selection Parameters to identify those three segments:
Selection Parameters:
GUTSCHRIFT Invoices exist
M-OFFEN Open target quantity
R-ERLEDIGT No open invoices
RECHNUNG Open invoices
W-OFFEN Open target value
WA351 Open issue quantity
WA352 Issue quantity reversible
WE101 Open goods receipt
WE102 Goods receipt exists
WE103 Open goods receipt
WE104 GR blocked stock exists
WE105 GR blocked stock exists
WE106 Goods receipt exists
WE161 Open goods receipt: returns
WE162 GR exists: returns
You can also use the column available in the layout to idenfity if the PO has an invoiced, if its pending, etc..
Kind Regards,
Mariano

How can i clean off all my third party applcations

How can i clean off all my third party applacations from the internet?

Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are also several shareware utilities that can uninstall applications:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

How can i use iphone 4 to make video calls through 3G network

Pls let me know how can I use my IPhone4 to make video calls through my Airtel 3G network. Also pls suggest if any alternate is available. Thanks

Re: Skype
If I used skype wouldn't I only ge able to call other Skype users??

How to access third party plugin through vc++ Programming

Hi,
i am new to vc++ and InDesign, i am using windows xp as OS and Indesign CS3 as version
now my work is to access the Third Party plugin styles, the third Pary plugin is all about InMath, that is all for mathematical relations using inmath plugin styles, my work is to accessing the styles through programming by using a InMath header files,
i tried to the best of myself, but i not get the solution,can u please give some thing usefull do this.
is it possible to access third party plugin through VC++ prgramming usign a single header file??
regards,
ram

Hi,
Can anyone please help me to accesss InMath styles in InDesign SDK using VC++ Programming.
Thanks
Saravanan

How do I transfer files from one third party app to another through wifi and without a computer

How do I transfer files from one third party app directly to another third party app through wifi and without a computer?

Wifi network
Email
Thumb Drive
Online storage such as, iCloud Google Docs, SkyDrive, etc.

How do I use Thunderbird to send third-party email through Verizon SMTP?

Similar Messages

Maybe you are looking for