How do I view multiple images from different projects at the same time?

Hello
I've been trying to find the answer in the user manual, but no luck so far.
I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
Thank you
Elizabeth

Thank you again Tony
I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
Elizabeth

Similar Messages

  • Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

    Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

    is this a windows in bootcamp question ?

  • Clipping an image from various places at the same time

    Hi,
    I am trying to clip an image from various places at the same time. Is it possible to do it?
    Right now I am in this phase:
      g2D.clipRect(x, y, screen.getWidth() - 40, screen.getHeight() - 40);
                        g2D.drawImage(planet, null, 0, 0);The x and y of the clipRect method I want them to be different each time but it is only taking the first clip.

    You can make an Area from a Shape (like rectangle) and then add other clipping elements to that

  • How do i view itunes store and my library at the same time?

    how do i view itunes store and my library at the same time?

    apple killed this feature (and i'm really unhappy about this!!). please send a request to apple directly. they obviously don't read this forum. the more people complain about this, the better!
    http://www.apple.com/feedback/itunesapp.html

  • How to open and save pictures from 1 folder at the same time?

    Is there a way to open and save pictures from 1 folder at the same time?
    I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
    greetings!

    Hi Kway,
    Here you are. I wrote a file a customer times ago & It did what you want!
    Just see the attachements and keep me inform.
    Regards,
    Julien Roland - District Sales Manager
    NI Belgium - Technical Support
    Don't forget to rate a good answer
    Attachments:
    Test existing Files.vi ‏23 KB
    Delete files from array of files (SubVI).vi ‏16 KB

  • How to update data in database from different region of the same page

    Hi,
    I have pepared two regions of tabular form based on the same table,each region is selecting different columns of the same table.
    I want to update the values from different regions in the database using single submit button.
    Regards
    Shashi

    I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
    Here is how
    a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
    b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
    c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

  • How do i export multiple full resolution movie files at the same time in final cut pro 6?

    I've been using Final Cut Pro since version 3 came out, know the program well, have even had jobs consisting of just operating the program.  I'm currently running version 6 because that's the latest one that works on my computer.  Back in verison 3, there used to be an option under Export to export a "Final Cut Pro" movie, which was really a Quicktime movie but appeared with a FCP icon and defaulted to opening in FCP, but the important thing about it is that it was a full resolution copy of the movie with no compression.  Now, that option seems to have been changed to "export Quicktime movie."  In my opinion that change is kind of stupid since it is so much less specific and is even less of an implication that one is exporting a full resolution file.  But in fact you are.
    One also has the option of using Compressor to export a version of a movie, and therein there are so many different options that if you are not confused by it I think there's something wrong with you.  Moreover, it would appear that there is no equivalent of exporting a full resolution version of a file in Compressor.  Fair enough: a full-resolution file involves no compression so is not appropriate for "Compressor."  BUT, suppose you want to export multiple uncompressed, full-resolution movies at once.  When you use Compressor, you are able to create batch lists and export many things at the same time, for instance, lists that will take many hours to complete so you can go to bed and get the results the next day.  But as far as I can tell there is no way to do this at full resolution without compression.  Instead you have to sit at the computer waiting for each one to finish and after each one, manually go to the next and select "export Quicktime movie."  Even if there is a way to do this I would complain that such an obviously desireable thing is so unaccessable.  In fact, the only reason I've typed out my question at such length is because I'm stuck here waiting for each one of my movies to export.
    Anyway, all my complaints aside, anyone know how to do this?

    what you're missing to export multiple files is the batch export command available in the file menu or by control clicking on the items in the browser.  You can export multiple sequences/clips at full resolution with this.
    This has been available in fcp for a long long time.
    Wow, you are right.  Now that you mention it, I can't believe I never noticed that.  Thanks.
    Only if you have the 'Self-Contained' box checked.  Otherwise you'll end up with a reference movie.
    Correct.  That box is typically checked by default.  There are other default settings you could change that would not result in a full-quality version, but what I meant was hitting that option from the pull-down menu, then changing nothing and hitting ok.

  • How do I print multiple reports to a directory at the same time

    I'm trying to print a list of monthly reports to a directory by using the code below. The first part of the code runs a query to select Business Units that will receive the reports. The idea is to cycle through this list and print one report for each
    Business Unit.  These vary from month to month. I create a record set from that query.  Where I'm getting stuck is in trying to pass the Business unit selected in the first query to the query that runs the final report. I end up getting multiple
    reports with different titles but the content is the same, so I'm doing something incorrect.  Here is the code.  Any help would be greatly appreciated. QryNewMOR runs the report.
    Private Sub Cmd012815_Click()
        Dim qdf As DAO.QueryDef
        Dim strSQL As String
        Dim strPathName As String
        Dim blRet As Boolean
        Dim rs As DAO.Recordset
        Dim stDocName As String
        Dim strSavedSQL As String
        Dim strBus As String
        Dim strExec As String
        If Me.Dirty Then Me.Dirty = False
        stDocName = "RptNewMOR"
        strSQL = "SELECT [Business Unit Long],[Responsible Executive] FROM tblRespExec WHERE (((tblRespExec.SelectedPrint)=True));"
        Set rs = CurrentDb.OpenRecordset(strSQL)
        If rs.RecordCount < 1 Then
            MsgBox "No Bus lines or Execs selected", vbCritical, "Error"
            Exit Sub
        End If
       'CreateFolder "C:\Test MOR"
        'store the current SQL
        Set qdf = CurrentDb.QueryDefs("QryNewMOR")
        strSavedSQL = qdf.SQL
        qdf.Close
        Set qdf = Nothing
    Do
        strBus = rs![Business Unit Long]
        strExec = rs![Responsible Executive]
        Set qdf = CurrentDb.QueryDefs("QryNewMOR")
       strSQL = strSQL + Left(strSavedSQL, InStr(strSavedSQL, ";") - 1) & " and (qryNewMOR.[Draft Distribution List]=" & rs![Responsible Executive] & ");"
        strSQL = strSavedSQL
        qdf.SQL = strSQL
        Debug.Print strSQL
        qdf.Close
        Set qdf = Nothing
        strPathName = "C:\Test MOR\" & rs![Business Unit Long] & ".pdf"
        DoCmd.OutputTo acOutputReport, stDocName, acFormatPDF, strPathName
        rs.MoveNext
    Loop Until rs.EOF
    rs.Close
    Set rs = Nothing
    'restore the SQL
    Set qdf = CurrentDb.QueryDefs("QryNewMOR")
    qdf.SQL = strSavedSQL
    qdf.Close
    Set qdf = Nothing
    End Sub
    Dean J. Waring

    I'm trying to figure out how to combine the two and am obviously not succeeding. Do you have a suggestion on how to make that work?
    Hi Dean,
    I am not completely sure of what you want. I suppose you want to modify the SQL definition of QryNewMOR, and use that modified query for the report?
    In that case, and in the line of your program, I would make a QueryDef: QryStdMOR, with the "standard" strSavedSQL (so: strSavedSQL =  QryStdMOR), construct strSQL in the same way, and assign this to the SQL definition of QryNewMOR.
    Thus, in your code at the very beginning, skip the line strSQL = strSavedSQL.
    strSQL = Left(strSavedSQL, InStr(strSavedSQL, ";") - 1) & " and (qryNewMOR.[Draft Distribution List]=""" & rs![Responsible Executive] & """);"
    ' skip this line: strSQL = strSavedSQL
    qdf.SQL = strSQL
    Within the loop you should not start with strSQL = strSQL & ...., because strSQL will retain then its value from the previous loop, and increases and increases...
    Finally, I have added some double doublequotes around rs![Resposible Executive], because string expressions must be enclosed by double doublequotes (or eventually a single singlequote).
    Imb.
     strSQL = strSQL + Left(strSavedSQL, InStr(strSavedSQL, ";") - 1) & " and (qryNewMOR.[Draft Distribution List]=" & rs![Responsible Executive] & ");"
        strSQL = strSavedSQL
        qdf.SQL = strSQL

  • How to update 2 datagrids in 2 different app at the same time?

    I'm very new to flex/flash builder and my question is: first I have to explain how the applications works. The first applications have a form for a customer to fill and datagrid to show the results.The data is send using PHP to a database in the server. The second application have a datagrid for the admin  that show the data that the first application send. Now, when  the data is inserted in the database, the first application dataGrid show the result soon as the records are inserted in the database, but the second application show the records after I refresh the Browser. The second aplication have a delete button to clear records from the database as is obious, the firstt database needs to be refreshed in order to see if the record has been deleted. So what I need is that both applications update as soon as the database is altered.If anyone have a suggestion I appreciate very much thanks in advance.

    Then, the time interval should be implemented in both applications since the first one inserts data and the second one delete the data. Instead of doing time interval I eliminate the second app and make 'states' in the first app for the 'add' and 'delete' data so I was able to open two instances of the app, one using the add state and the other with the delete state thinking that since was the same application both update at the same time but unfortunately I was wrong and one needs the browser refresh anyway. I really not know how to do time interval in flex since is different to flash that you just do the interval for the next frame and back to the first to load the data since is a timeline based app, flex not, besides, I'm just start using flex a couple weeks ago and don't know much about the coding  but I will keep researching to do that. Thanks for the advice and sorry to take so long to answer.

  • How can i run multiple instances of Photoshop EXE at the same time on windows 7

    Alright. You may ask why do you need multiple ?
    Assume that i have 10000 PSD files in 10 different folders
    I have a script that just save as them as PNG
    And these files are each 3000x3000 px
    My computer has 8 cores and 1 photoshop exe is only using 1 cpu core
    Also i have SSD raid system it has 750 mb read write per second
    So right now i am wasting my time with running only 1 photoshop exe instead of at least 4

    I'm not aware of a way to run multiple instances or different versions of photoshop at the same time on windows.
    Assuming of course they are all installed on the same operating system.
    On mac versions you can running two different versions of photoshop at the same time, but i don't think that's possible on windows where it
    appears that only one version of photoshop can run at a time.

  • Is is possible to open event lists from different tracks at the same time in Logic Pro 9?

    Is it possible to open event lists from two difference tracks in an arrangement at the same time in Logic Pro 9?
    When I switch between tracks the event list swiches as well. Thanks in advance.

    If you deselect the litte chain link icon in the event list window, it will no longer follow your region selection and you can openas many as you need. Also you can select multiple regions and see the inthe SAME window if you select to show multiple regions, and you can have the notes shown in their respective track colors.

  • Accessing a static varible from different object at the same time

    hi
    assume that i have calss it contains a static variable i am creating
    N numbere object of that class and i am try to access the static variable at the same time from different object.if i access like that any problem(deadlock) will occure or not? plz help me
    with regards
    suresh

    FeedFeeds : Read news and blogs a new way!
    http://www.feedfeeds.com
    Please don�t spread any kind of propaganda in this forum...;-)

  • How do I roll up tasks from different sites in the same collection into one task list that can be overlayed onto a calendar or a timeline?

    I am working on how to make an aggragate list that I would like to overlay to a calendar, or add to a timeline.  There are more than 20 different project sites that have task lists.  I created a custom content type for a task list that adds the
    column "Major Milestone."  I would like to take all tasks that are marked as Major Milestone and have them be displayed on a calendar or timeline on the parent site that sums up all of the Major Milestones in the child sites.
    How should I go about doing this? ... and thanks in advance!

    Thank you for your responce. I used a content query wp to rollup only the Major Milestones, but am unable to overlay the results to a calendar.. The link you provided is for overlaying different task lists onto a calendar, but does not detail how to
    overlay the results from the content query onto a calendar.

  • Spreadsheet: how can I store test results from different tests in the same central spreadsheet?

    I am looking to gather test data using LabVIEW. I then want to store all the data in the same spreadsheet, a kind of central data base. I know how to store single test data in a spreadsheet but I can I get the software to write new data in the same file without over writing the old data?

    My first recommendation is that if you need a database--use a database not a spreadsheet. A DBMS isn't that hard to use and could pay big dividends in the future.In any case, to answer your question directly, it sounds like you are writing tab-delimited data to a text file that you will then open with a spreadsheet program. On the file write vi is a boolean input that specifies whether the new data should be appended or overwrite the existing data (the default is to overwrite). Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How can I load multiple compositions, all to play at the same time? eg 3 slideshows

    Hi
    Hoping someone at adobe edge animate can help me with some custom code as I need to load 3 different compositions all onto the same webpage.
    I have been through the Bootstrapper instructions thoroughly and have tweaked the code to try to get it to do what I require but I still can't make this work.
    I have 2 slideshows one footer one banner and also a small logo animation.. all need to reload and loop continuously.
    So far I have managed to get all three up but they all interfere with each other and none are playing properly.
    This is an urgent job for a client so I would really apprecaite some help.
    Thanks.. !
    Alayna.

    hi alayna,
    its definitely possible - see this sample:
    http://salesdigital.com/multiedge/
    3 edge compositions in one html page
    just check the page source code - in the head tag - it's not as bad as you think..
    hope this helps!
    ~keith

Maybe you are looking for