How do I zoom in and out on a clip using final cut pro 6?

I have searched around and I haven't found anything about how to zoom in and out on non-still video. I am sure there is some simple explanation as of how to do this but I can't seem to find it. If you guys could help me out that would be great. Thanks.

Double click the clip in the Timeline, to place it in the viewer.
In the Viewer window click the Motion tab. Adjust the "Scale" control and set keyframes as needed.

Similar Messages

  • How to fade background music out and fade in video clip audio Final Cut Pro X

    I am putting together videos and photos made during one of the trips, and I have background music running throughout the whole movie, but I want to fade this music during some parts of the video to hear the original speech/sounds of it, and then increase the volume of background music again. I know that in iMovie it is done in a few simple steps, and it almost automatically fades the music in/out. But I cannot find any similar options in Final Cut Pro X, how do you do it there? (I have 10.1.2 version)

    Daniil. wrote:
    I am putting together videos and photos made during one of the trips, and I have background music running throughout the whole movie, but I want to fade this music during some parts of the video to hear the original speech/sounds of it, and then increase the volume of background music again. I know that in iMovie it is done in a few simple steps, and it almost automatically fades the music in/out. But I cannot find any similar options in Final Cut Pro X, how do you do it there? (I have 10.1.2 version)
    This is very easy to do.
    Press the letter R to switch to the Range tool. Drag the appropriate range in the audio clip. Press A to go back to the normal arrow tool. Drag the volume down. (Alternatively, instead of pressing R and then A, you can just hold down the letter R while you drag; then release and you are still using the arrow tool)

  • How to apply 3 way color correction to multiple clips in Final Cut Pro?

    I have multiple clips from the same time and space footage that need color correction. I have worked on one of the clips and found the settings I like.
    Is there a way to apply that correction to other clips without starting from scratch on each one?
    Thanks!

    SoCal (above) listed one way. Another way you can do it if you like the color correction that you have done and want to save it, you can click the picture of the hand in the color correction tab and drag it into the browser. This saves that specific arrangement of colors, highlights, etc.
    Also, this might be a little easier but instead of pasting attributes and right clicking you can just grab the hand (that I just talked about) and drag it onto the clips you want to apply the same color correction to. The hand is located in the color correction tab (in viewer) and is under the "numeric" button.
    Note: All of your clips in your timeline will have different contrasts, brightness, colors, etc. NO clip is going to have the EXACT same attributes as another. It doesn't matter how expensive and professional your camera is. Every shot is different whether you are using artificial lighting or the natural lighting. Having that said, you will probably still need to adjust your different clips a little bit to make them look like they are in the same room at the same time. Hopefully if your lucky or had perfect lighting for all of your shots, you will not have to do much messing around with your contrast, brightness, etc. Good luck!

  • How do you fit still images (jpegs) to match clips in Final Cut Pro 7?

    The images are too small and the clip can be seen on the borders.  I tried making them bigger b/f dragging but that distorted the image.   I shot the video in 16:9 and shot the pictures with my IPhone not using HD. 

    Now, are you asking about a procedure in FCP7? Cuz this is the FCPX forum. But, if you are asking how your conform images to fit "LIKE" FCP7, but in FCPX... Here's how. In addition to the transform / crop tools, go to your inspector. In the "Spatial Conform" section there is a drop down for "fit."

  • How do I zoom in and out on my iPad videos

    How do I zoom in and out using my ipad video?

    Double click the clip in the Timeline, to place it in the viewer.
    In the Viewer window click the Motion tab. Adjust the "Scale" control and set keyframes as needed.

  • How do i zoom in and out while videoing

    how do i zoom in and out while i am videoing

    There is no built-in zoom function for video.
    So, you can either quickly run closer to the subject to zoom in, and quickly run back to zoom out, or use an alternative video capture app, such as:
    http://itunes.apple.com/us/app/video-zoom-2/id406643501?mt=8#

  • I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

    I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

    You would need an image editor to edit the images and add a border to the image first before importing them into Final Cut.
    Cheapest and very good image editor?
    PIxelmator.
    Located in the Mac App Store. $14.99 USD.
    Here is the Pixelmator website to give you an overview of the app.
    http://www.pixelmator.com/
    Good Luck!

  • I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

    I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

    Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
    you that I digitized and eventually brought into FCPX..took me many months not weeks
    to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
    gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
    it out to a processing house...also regarding eventual storage format...remember
    Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
    of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
    containers and imported the mov files into FCPX where I got rid of the hundreds of
    minutes of Colorado mountain landscapes to get to that one minute shot of the kids
    on horseback  ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
    of source to not miss those precious memories takes diligence and hard work but its worth
    it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
    Def not HiDef

  • When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    Glad you found the answer.  But something seems wrong.  FCP should be able to assign the scratch disk to your startup drive.  It's not advisable, but it should be possible.  You might want to try and figure out what's going on before what ever's going on cause other problems.

  • HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

    i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

    Same reply.

  • I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

    I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

    AH...good. 
    There is no limit on the times you can install it from the DVDs. There's just a limit as to being able to run it on multiple machines AT THE SAME TIME. If your old computer dies, or you sell it (please reformat the drive so they don't get FCP for free), then you can install on a new computer fine.  And you are allowed to install on (1) desktop and (1) laptop at the same time as well...but only use it on one machine at any given time. Meaning you can use it on the desktop at work, and then when away from the office, on your laptop.
    Long story short...you can install it fine without any issues.

  • I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

    I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

    I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

  • I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    I believe there is no  "Export to Tape"  feature as appeared in legacy FCP.
    SORRY! Just noticed you are using FCP 6.
    You need to ask this question in the Final Cut Studio forum.
    Message was edited by: Ian R. Brown

  • How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
    Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
    Final Cut Pro - Wikipedia
    There are a few apps that are better.  I think you can run multiple instances of Handbrake for one.
    I've read about and wanted to try PowerDirector 9 (Windows)
    PowerDirector 9 video software
    video editing software Wiki

  • How do you mark a section from the timeline to send to Compressor 4 using Final Cut Pro X?

    I am trying to send just a certain piece from the Timeline to Compressor 4 using Final Cut Pro X and I can't figure it out. Please help!

    jakelovesanna wrote:
    The video itself is intirely 5 minutes, but the timeline goes to 24 hrs.
    24 hours?
    If you select the timeline and press Shift+Z do you see a lot of black space in the timeline? If so, you may have a huge gap clip (although I fail to understand how you achieved it). Click on it and if it can be selected, delete it with the Backspace Key (next to the = key).
    Then press Shift+Z again.
    If I've got this wrong, can you post a screen grab of your timeline?
    Andy

Maybe you are looking for

  • Quicktime Streaming Server - qtss - service does not start in Server Admin.

    Hi, We're currently trying to configure a video/audio streaming server, but we've fallen at the first hurdle and the QuickTime Streaming service will not start (I am trying to enable it via Server Admin). Can anyone think of any possible reasons for

  • Burned CD locks up and won't play more than the first track

    The cd burns perfectly and finishes but when you go to play it it will only play the first or first and second track. I have thrown away 6 disks. Does anyone know what is going on. Toshiba   Windows XP  

  • Purpose of empty iTunes folders?

    I'm just curious about some folders that I see in my iTunes library: 1. Folder name iTunes Music.  My media content, including my music, is in a folder named iTumes Media.  The iTunes Music folder is empty.  What is its purpose?  Can I delete it? 2.

  • Can't import file into DVD studio

    Hi we just wrapped up a video which needed closed captioning. The company doing the closed captioning sent us a .SCC extension file which is what I'm supposed to use to embed the captioning into the video it is going along with. Unfortunately when i

  • Importing CDs - Album Artwork and Listening

    At some point this summer, when importing CDs into itunes, it stopped automatically playing the CD and downloading album artwork. It is either related to a recent software update or my new crappy satellite Internet connection. "Get Album Artwork" doe