How do restore default settings in FCPX Compressor?

How do I restore FCPX Compressor default settings. I lost them when adding a few custom settings.

First, the B for Bold, I for Italics, etc, that you see above, often do not work, so you'll probably just see plus marks around some of the words below. Please play like these words are italicized since in reality these functions don't work consistently.
I said.... +“she can't get a menu to come up for her Dock icons.”+ To spell that out.... when she chooses an Icon on the Dock, say for example, Address Book, then taps the touchpad with two fingers, no menu comes up, meaning the menu that gives you options, such as ‘quit’. I can't find what controls that function (the function that brings up that menu).
I said she.... +“got excited about changing all the settings.... now it's all we can do to see the pages on her screen....”+ That means she went into System Preferences and changed color/screen/display/etc and all kinds of other settings that makes anything on-screen hard to see.
I’d rather not have to try to find all the settings she changed and then change them back to the original settings. I thought there was a +restore to original settings+ on the computer. If there’s not, so be it. Spotlight couldn’t find one.

Similar Messages

  • How to restore factoy settings on my mac pro desktop

    Does anyone know how to restore factory settings on a mac pro desktop?

    Welcome to the Apple Support Communities
    To restore the Mac Pro to factory settings:
    1. Insert the Mac OS X DVD that came with your Mac, and press the C key while your Mac is starting.
    2. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
    3. Close Disk Utility and reinstall Mac OS X, so it will be installed using default settings
    This will erase everything, so make a backup of your data before

  • My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

    My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB.  I get an error on my PC stating that device attached to USB port is not recognizable.  Can anyone help?

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694

  • How to Restore Factory Settings on a Mac?

    How to Restore Factory Settings on a Mac OS X 10.6.8?
    I have been told you can do this without the Installation CD. I also do not remember the installation CD when i got the laptop. If it's possible then please someone let me know! if not then how can i get a new CD to do this?
    my computer keeps freezing on me at random times, and i have tried taking the laptop to my college tech support and also Best Buy and they said they can't do anything and that i need to try resetting the mac.

    You may not remember the installer disks but they came in the box. Your profile shows you are running 10.6.6 Snow Leopard. To restore back to factory settings you need those disks. That said to go that route may be unnecessry. Stay away from Best Buy tech people. They know nothing. Without the disks you do a repair disk to see if that helps:
    Start up your computer in single-user mode to reach the command line.
    Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    At the command-line prompt type:
    /sbin/fsck -fy
    Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
    ** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    ***** FILE SYSTEM WAS MODIFIED *****
    Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    Your computer should start up normally and allow you to log in.

  • How to restore safari settings?

    how to restore safari settings & how to change the language in safari?

    You would need to change the language globally, meaning on all your apps in order to change Safari.
    Open Sytem Preferences > Language & Text then select the Language tab.  (It may say System Preferences > International) instead of Language & Text.
    Drag the language you want to use to the top of the list.

  • How to restore factory settings iphone 4

    how to restore factory settings iphone 4

    Well, just have the iPhone turned off and connected to the computer, and then hold the home screen button with itunes open for 10 seconds. It will recognize it, and you can just hit restore.
    And I would like to share you below articles about restore data from iPhone:
    * How to restore iPhone from iTunes backup files
    * How to put your iPhone into DFU Mode for Restore

  • How can I restore default settings in Firefox?

    You won't believe this... the cat jumped on the desk and flopped down on the keyboard when in Firefox. True. Now the images in some websites are to big for the screen and I have to scroll or pan to see the whole page whereas before I could view the whole page. Also, when I click on home, instead of opening only one tab Firefox opens two extra tabs and fills one with Gmail and the other with Facebook. I tried going back to the Firefox version before version 4 but still the same. I think I need to restore my default settings but I can't find anywhere to do this.

    hi Ben,
    I found two files called AdobeDreamweaverSettingsPrefs  (.xml and.tmp)
    I removed them , emptied trash and restarted dreamweaver but the font stacks are sill missing.
    thank you for your suggestion,
    christos

  • My Time Capsule has stopped working.  Restoring default settings does not work.

    I have a 2TB Time Capsule (Model No. A1409).  I think that it is approximately 20 months old.  It has been working very well until around two months ago, when it began to display the flashing amber light.  At that time I performed a hard reset, restoring the default settings.  This worked and the capsule continued backing up perfectly for a further three weeks.  However, about three weeks back the flashing amber light returned.  As I have been busy elsewhere I was not able to attend to this untl recently.  It does not seem to matter how many times I reset the device, I cannot return it to a working state.
    The capsule has previously been set up to connect to the internet through my existing broadband service.  As such, it was initially set up and subsequently restored wirelessly.  I no longer seem to be able to achieve this.  Has anybody else experienced similar difficulties and if so, were you able to remedy it.
    Grateful for any advice.  I feel another trip to the Genius Bar coming on.

    Yeah absolutely - no problem.
    I had the same thing happen where I did a restore on my personal TimeCapsule (TC),
    and when I updated the device after installing it, it for some reason set the TC into bridged mode shutting off DHCP/NAT service.
    Which means, that it doesn't reserve an IP for any client trying to attach. This is what it sounds like yours is doing.
    So if you see that it says bridged, and that box with dhcp reservation is greyed out, change it from bridged to DHCP/NAT.
    This will allow any client (computer/device) to attach and reserve an IP address for access to the internet.
    Once that is set, and you update, hopefully the light should go green.
    I would also recommend checking the "internet" tab, and making sure that your IP address is assigned using DHCP. (It probably is - but that part is essential for communication with your Internet Service Provider (ISP)...
    SO - if the device goes green after the update:
    If it does, then go back into the router and click on the wireless tab and confirm your wireless settings are correct, if any changes are made, update.
    At that point, you should be able unplug your laptop to wirelessly connect to the router.

  • How to Set Default Transition in FCPX?

    FCP Studio allowed you to "Make a Favorite" and set it as the default.  FCPX has a "Favorite" item in a drop-down menu, but it doesn't seem to set a chosen transition as a default.  How to you set a default in FCPX?

    Hi,
    this is directly from the help menu:
    Set transition defaults
    Choose Final Cut Pro > Preferences, or press Command-Comma (,), and click Editing.
    Set the transition default settings.
    Default length: This sets the length, in seconds, of all transitions you add to the Timeline. You can adjust the transition length after it is in the Timeline.Note:  Some transitions have a set duration and do not follow this setting.
    Apply transitions using: This defines where the transition’s video content comes from. For information about the “Apply transitions using” setting, seeTransition overlap options.

  • URGENT! Accidentally restore default settings

    hi
    a friend accidentally clicked something somewhere which reset my user settings to default! when i restarted, i lost my background, dock, mail, safari bookmarks, menu bar settings, keychain access etc.
    any idea how to restore my user settings? most files are still around but there r just not surfacing.

    Entire Library folder was moved.

  • Restore default settings after using "Desktop 2 Login" app?

    Hi all!
    Downloaded the Desktop 2 Login app here:
    http://www.apple.com/downloads/macosx/icons_screensavers/desktop2login.html
    How do I restore the default settings after having run this?
    Thanks in advance!

    Anyone?

  • I need to know how to restore past settings from more than a week ago, How do I do it?

    I changed some settings trying to allow cookies and I don't know what I changed. How do I restore my settings to back about a week ago before I made the changes?

    Use "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window - See http://kb.mozillazine.org/Resetting_preferences

  • How to restore default OS X Lion theme?

    Recently, I downloaded an app named "Cloak" which changes the color of your Finder, but it didn't work so I uninstalled it. After I did that, it changed the buttons around. For example on Safari, when I press the red exit button it goes full screen instead. Other things happen too (Look at the photo) How do I restore default OS X Lion theme so that it goes to normal? It's really ******* me off, help me pleaseee?

    An example of the 3rd party programs that people insist on installing and wonder why their systems go haywire.
    I would suggest going to the developers site and seeing if they have a downloadable uninstaller.
    http://www.taoeffect.com/blog/2009/05/cloak-manage-your-invisible-files/
    If you install these eye candy programs, they become entwined with your core system and the result is often as we see above, or often worse, like data loss through disc or system failure.
    Good Luck

  • When & how to use default settings option in job scheduling with BO 4.1

    Hi,
    With BO 4.1 we got new features and one of them is "Default Settings" option in the job scheduling. While scheduling a report in CMC we are getting below attached screen. I want to know when and how to use this option? while scheduling job on queries.
    Please guide me to, thanks in advance.
    Regards,
    Mithun Pati.

    Hi Mithun,
    Below thread may give you clear idea.
    The Purpose of the default settings is to have customized default settings for the enterprise. These settings would apply to any user who has access to Info view and wants to schedule a report. For example you can setup default values for "From" section of email so any scheduled reports use those settings. Similarly another setting we have defaulted is the number of retires involved and the seconds for each retry. Business Objects will not send out a failure emails unless the last retry has failed. The default settings should only be modified by an admin.
    Purpose of Default Settings when scheduling a WebI report?

  • Restore default settings

    What happens when you restore factory default settings, do you lose all calender and contact info ??, does doing a restore re-install missing software??
    regards
    paulanthony

    Hi there,
    Restoring factory settings does not wipe out any user data BUT, you should always (I mean always) do a backup if you can't afford to lose any of your user data. Restoring factory settings will erase all Access Points and customised settings to the phone, amongst other things.
    A hard reset will return your phone to the factory condition, erasing ALL user data/settings, and any applications added to the device not included as part of the original firmware.
    Hope this helps.
    If you found this post helpful, please click on the green "Kudos!" star. Cheers!

Maybe you are looking for