How do u turn down the tick volume when using the remote control?

how do u stop the ticking(clicking) when adjusting the volume using the remote control?

Hi philippalldino,
I understand that you do not wish to hear your volume feedback when adjusting the volume of your computer. Here is an article that will tell you how to disable this feature:
OS X Mountain Lion: Turn off the alert sound for volume keys
http://support.apple.com/kb/PH10762
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Similar Messages

  • HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

    how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

    Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
    The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
    Hope this helps.

  • How do I turn down the volume of the Media Browser in Audition?

    See subject above/

    I'm using an RME Multiface II and mixing in 5.1, but the point is that the project is very quiet, and many of my samples are loud. If I turn down the whole thing, I can't hear the soft project over the loud samples that I'm trying to add. (When I'm working in Acid or Reaper with loop-based stuff, I can simply turn down a volume slider in the media browser equivalent.)
    -SCP

  • How do I turn down the music when a video plays during a slideshow in iphoto?

    The slideshow music volume does go down slightly when a video plays but sometimes it can be difficult to hear what is being said.  Is there anyway to have the music turn off when a video plays as part of a slideshow, or as least control how low it is?  Thanks for your help!

    You can't.  There used to be a mute music during video play option but that never worked very well. To get it as you want you'll have to create the slideshow in iMovie where you can add and control the audio tracks.
    I prefer using iMovie 6 HD for that as it give users by far the best control over audio tracks.
    OT

  • How do i turn off the headphone controls on my iphone?

    My headphones appear to be broken, or at least on the way to being broken. When I'm listening to music on my iphone with them they keep pausing or skipping the song. It's really annoying is there a way of turning off the controls on my headphones so they don't interfere with my music?
    Thanks

    Go to Settings > General > Accessiblity and set the VoiceOver option to "off."

  • How do I turn on the GUI controls for the Focus Blur Effect in Final Cut Pro X

    I can't find the setting that enables the GUI control overlay to manipulate the parameters of the Focus blur effect in Final Cut Pro X. When I have the clip and the focus effect selected I only get a center element overlay. At one point I had controls for all the other elements of this effect.
    anyone know a shortcut or how I can toggle these controls back on?

    I don't see any other screen controls either.
    Maybe there was a change sometime, or maybe you were using a different effect?

  • Turning down the verbosity of logging in  search service

    Hello old friends.
    Our search node is generating 1.5gb of logs per day. how can i turn down the verbosity of the logging? I don't see any configuration files that get read, and the config mgr doesn't have anything about logging verbosity.

    Here are 2 log file settings in the search area, not sure what they impact but I don't see many other log setting files.
    Definitely let us know what you uncover though.
    1)
    Cluster.ini file at this path:
    \bea\alui\ptsearchserver\10.3.0\cluster
    # Logging
    # The following settings may be used to override the default logging policies.
    # For a given severity level specify a comma-delimited list of values
    # corresponding to the logs which should receive log messages at that
    # severity level. Acceptable values are trace,event,cluster,none.
    # Note that internally log messages are routed either to the cluster log
    # or the local logs. While a cluster log message may be echoed to the
    # local logs, a local log will never be sent to the cluster log
    #RF_LOG_DEBUG_OUTPUT=none
    #RF_LOG_INFO_OUTPUT=trace
    #RF_LOG_WARN_OUTPUT=trace,event,cluster
    #RF_LOG_ERROR_OUTPUT=trace,event,cluster
    #RF_LOG_FATAL_OUTPUT=trace,event,cluster
    #RF_LOG_PERF_OUTPUT=none
    #RF_LOG_FUNC_OUTPUT=none
    #RF_LOG_ACTN_OUTPUT=none
    2)
    wrapper.conf file at this path:
    \bea\alui\ptsearchserver\10.3.0\adminui\settings\config
    # Service wrapper Logging Properties
    # Logging properties for the service wrapper only, these properties
    # do not control application-specific logging.
    # Valid log levels for console, log file, and sys/event log output are
    # DEBUG          Verbose debug messages
    # INFO          JVM output and informative messages.
    # STATUS     State changes
    # ERROR          Errors only
    # FATAL          Fatal errors only
    # Format of output for the console. (See docs for formats)
    wrapper.console.format=PM
    # Log Level for console output. (See above for log levels)
    wrapper.console.loglevel=INFO
    # Log file to use for wrapper output logging.
    wrapper.logfile=%APPLICATION_PATH%/logs/wrapper.log
    # Format of output for the log file. (See docs for formats)
    wrapper.logfile.format=LPTM
    # Log Level for log file output. (See above for log levels)
    wrapper.logfile.loglevel=INFO
    # Maximum size that the log file will be allowed to grow to before
    # the log is rolled. Size is specified in bytes. The default value
    # of 0, disables log rolling. May abbreviate with the 'k' (kb) or
    # 'm' (mb) suffix. For example: 10m = 10 megabytes.
    wrapper.logfile.maxsize=0
    # Maximum number of rolled log files which will be allowed before old
    # files are deleted. The default value of 0 implies no limit.
    wrapper.logfile.maxfiles=0
    # Log Level for sys/event log output. (See above for log levels)
    wrapper.syslog.loglevel=STATUS

  • Turn down the volume of built-in speaker before playing music

    So I was wondering if there was any way to turn down the volume of the built in speaker prior to playing music/video. I imagine that if I'm REALLY quick and pause the action, I can turn it down, but I'd rather not have to race against time.
    The context for this, is the desire to show someone else video on the iPhone (say a National Geographic video podcast) without the audio blasting forth.
    Any ideas?

    So you're saying the phone doesn't remember the previous setting you had it at and jumps up or something...?
    ..or you want to hit play and have it not play so you can adjust the volume first...sorry can't help if that's the case. It kind of doesn't make sense from a UI perspective, when I press play or start a video I want it to play....different strokes for different folks tho

  • How do i stop muting people during my conversations? i don't mean to hit mute but it always happens. can i turn down the sensitivity?

    how do i stop muting people during my conversations? i don't mean to hit mute but it always happens. can i turn down the sensitivity?

    The iPhone includes a proximity sensor which puts the screen to sleep or turns it off when the iPhone is held to your ear and face during a call.
    Do you have a screen protector installed and/or are you using a case that might be blocking or partially blocking the proximity sensor?
    If you are using a case, remove the case before the next call. If the same does not occur without the case, you need to get another case that doesn't block the proximity sensor.

  • How can I turn up the volume of the speakers?

    The volume is very low and I can barely hear the person calling. How can I turn up the volume? I can I reach the volume settings inside the skype app?

    IT'S A REAL PAIN WHEN YOU'RE TRYING TO TALK TO SOMEONE. 
    bOTH THE MIC AND SPEAKERS AREN'T REALLY UP TO IT.
    WHAT I DI WAS SORT THROUGH MY MOBILE PHONE LEADS AMD FOUND ONE THAT FIT THE KINDLE SOCKET AND HAD A MIC ON IT, TOO. 
    wORKS FINE NOW.
    hOPE THIS HELPS. XX

  • How do you turn off the keyboard volume key clicks on macbook pro?

    how do you turn off the keyboard volume key clicks on macbook pro?
    Thanks for the help!!

    Thanks! That was easy.
    All the Best!

  • How can I turn off the volume when I turning on my computer?

    Hi,
    how can I turn off the volume when my imac is turn on? later if i use it to listens music or whatever I can turn it on manually
    I don't want to sound that indicates the computer is on
    thanks
    adaltam

    Hello:
    Simply hit the mute key on your keyboard (found over the F10 key).
    Barry

  • When I make an outgoing call the recipient cannot hear as though the volume were turned down Lowe. However when I use my speaker phone function the recipient can hear at normal volume. Is there a fix for this issue? Thanks Teresa

    When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low
    However when I activate the speakerphone the recipient can hear me loud and clear
    Is there a fix for this?
    Thanks
    Teresa

    Hey Tlabounty,
    Thanks for the question. I understand you are experiencing issues with the microphone on your iPhone 5. To troubleshoot this issue, you may find the information in this article helpful:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Note that speakerphone and regular calls utilize seperate microphones on the device. It sounds like you have isolated the issue. Furthermore, if you determine that the issue is hardware related, the following resource may help you get started with the service process:
    iPhone Repair and Service - Apple Support
    http://www.apple.com/support/iphone/repair/
    Thanks,
    Matt M.

  • When i make a call i can hardly hear the person on the other end ,how do i turn up the volume on the phone so i can hear them better pls help

    when i make a call the person on the other end is hard to hear ,how do i turn up the volume on the phone so i can hear them better pls help

    When on a call, press the round button with the + on the side of the phone until the volume is where you want it.

  • Inspire s2 wireless turns down the volume by itself.

    Hey. I bought my Inspire about a year ago and it worked fine.
    Then suddenly when i connected it to my laptop it turns the volume down. I can turn it up again but it just keeps muting.
    First i thought it was my laptop settings and i'm not a geniuos with computers.
    But then i connected the speakers with my iPod touch and it still turns down the volume totally random. It does it approx every 5 minutes.
    Can anyone tell what the devil the matter is?
    (Sorry for my english, i'm danish :P )?

    Hi,
    Sorry but this doesn't sound right, I suppose something's wrong with the speakers. You might want to contact Customer Support for assistance.

Maybe you are looking for