How do you access a web service to insert data into table?

Ok I have a simple html/jsp survey form to host on our web site. Because of firewall issues I cannot do a direct connect to the database and insert the data from the form. So I need to take the data from the survey form, and pass it to an existing web service, or create a web service that will insert this information for me into the database table?
Thanks again.
orozco

Thanks for the reply shanu. Well, because of firewall issues, as a work around we use a web service to insert data into the database table. Since the Web Service already exist, we just thought it would be easy enough just to pass the parameters to it, and have it do the insert. So really all I need is just to communicate with the already existing web service. I will be honest though I have not really worked with web services before.
orozcom

Similar Messages

How do I run a database procedure that inserts data into a table from withi

How do I run a database procedure that inserts data into a table from within a Crystal report?
I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department. However, I'd like to know when a particular report is run and by whom. To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called. The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC. How can I call this procedure from within a report when it's run and provide it with the 2 parameters? I know the procedure works, I just can't figure out how to call it from with a report.
I'd be grateful for any help.
Colin

Hi Colin,
Just so I'm clear about what you want:
You have a Stored procedure in your report. When the report runs, you want that same procedure to write to a table called Report_Log.
If this is what you want the simple answer is cannot be done. Crystal's fundamental prupose is to read only, not write. That being said, there are ways around this.
One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed. This would be the most efficient.
The other way would be to have an application run the report and manage the entry.
Good luck,
Brian

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

How to allow access to web service running under ApplicationPoolIdentity

Hi All,
I have a WCF web service hosted in IIS 7 (or maybe 7.5, whichever comes with Windows server 2008 R2) using DefaultAppPool running under ApplicationPoolIdentity per Microsoft's recommendation. The web service needs to call a stored procedure to insert data
to a db. The web server is on a different VM than the database server. The db server is running SQL 2008 R2. Both VMs run Windows server 2008 R2.
When the web service tries to connect to db, it encounters this exception:
Exception in InsertToDb()System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
Here's the connection string in web.config:
Application Name=somewebservice;Server=somewebserver;Integrated Security=SSPI;Database=somedatabase;Connection Timeout=60"
How should I configure SQL security to make this work?
Thanks in advanced.

Thanks for the link Dan. Maybe I'm the one who cause the confusion :)
If I understand you(and Erland) correctly, you suggest using a custom, domain account for application pool identity. However, if we do that, our IT will need to maintain those accounts, and they don't want that. So I'm choosing a built-in account called
ApplicationPoolIdentity as the application pool identity, but it's not working. Network Service, on the other hand, works, but my boss wants us to follow MS's best practice.
What's puzzling is that according to this: http://learn.iis.net/page.aspx/624/application-pool-identities/, both Network Service and ApplicationPoolIdentity uses machine account to access network resource (like db in this case), but in my case, Network Service
works, but not ApplicationPoolIdentity.
Hallo Stephen,
with respect - it seems to me that only idiots are working at your IT ;)... It is absolutely useful to work with "service accounts" created within the domain. That's the only way to manage and control accounts!
If you want to "pass through" the identity of the web user (SSO) you have to check whether the app pool is set to "allow impersonate". As far as I understand the ApplicationPoolIdentity-function the app pool will create a unique user named as the service.
I assume that will not work with the connection to the sql server because this user is unknown.
Local Service will not work because it's restriction is located to the local machine.
Network Service will work because access to network resources will be available.
So my recommendation is to use a dedicated service account or impersonation:
http://msdn.microsoft.com/en-us/library/xh507fc5.aspx
Uwe Ricken
MCITP Database Administrator 2005
MCITP Database Administrator 2008
MCITS Microsoft SQL Server 2008, Database Development
db Berater GmbH
http://www-db-berater.de

How do you create a short cut to insert date in Numbers 3.1

Hi,
Does any one know how to create a keyboard shortcut for inserting the date in Numbers 3.1

The install-by-doubleclicking Automator Service (where it becomes a menu pick if you use it often and find that more convenient than a formula in a spreadhseet) is here (Dropbox download). Depending on your settings you may need to go to System Preferences > Privacy & Security and click the 'Open Anyway' button. If you want you can assign it a keyboard shortcut in System Preference > Keyboard > Shortcuts. If you don't like it or find you the formula is just as easy for you, then in Finder hold down the option key, choose Go in the menu and navigate to Library > Services, where you can trash it the way you would any file or package.
SG

How configure a primavera web service to return data from the second database?

Hi everyone,
We have P6 with first WS deployed on a single server weblogic domain. The first WS return data from the first database instance.
Then deployed advanced second WS on a separate weblogic domain server with a different port. Configured second WS with <WS2_INSTALL_HOME>/bin/dbconfig.sh, creating a new branch of a configuration that specifies a different second instance of the database. However, this configuration is ignored and second web services return data from the first database.
We have one domain, which including next servers:
Name / Host / Port / Deployments
P6 / localhost / 0001 / P6(v8.3), p6ws1(v8.3)
p6ws2 / localhost / 0002 / p6ws2(v8.3)
Now we have two different file BREBootstrap.xml.
P6 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db1:1521:db1</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass1</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB1" instances="1" logDir="anydir/P6EPPM/p6/PrimaveraLogs"/>
</Configurations>
p6ws2 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db2:1521:db2</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass2</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB2" instances="1" logDir="anydir/P6EPPM/ws2/PrimaveraLogs"/>
</Configurations>
‘P6 Config_DB1’ and ‘P6 Config_DB2’ including Database property for 1 and 2 database respectively.
How to configure a second web service to return data from the second database?
Thanks in advance!
Regards,
Dmitry

OK, so I got this to work this morning with Username Token Profile (with little help from Oracle Support).
I followed your steps 1-4 but in step 2 I didn't add the -Ddatabase.instance=2 because I want to check to see if my code could swap between different instances.
It appears for Username Token Profile to use Database Instance, you need to set it in the soap header.
So my soap request looks like this:
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <s:Header>
        <DatabaseInstanceId xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Authentication/V1">2</DatabaseInstanceId>
        <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
            <u:Timestamp xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3'>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
                <u:Expires>2014-10-23T04:29:01.152Z</u:Expires>
            </u:Timestamp>
            <o:UsernameToken u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3' xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd'>
                <o:Username>admin</o:Username>
                <o:Password Type='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText'>password</o:Password>
                <o:Nonce EncodingType='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary'>vJBQhCc28bAeszej7gOaiC2tVCQ=</o:Nonce>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
            </o:UsernameToken>
        </o:Security>
    </s:Header>
    <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
        <ReadProjects xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Project/V2">
            <Field>ObjectId</Field>
            <Field>Id</Field>
            <Field>Name</Field>
            <Field>Status</Field>
            <Field>StartDate</Field>
            <Field>FinishDate</Field>
            <Field>DataDate</Field>
            <Filter>Id = 'EC00515'</Filter>
        </ReadProjects>
    </s:Body>
</s:Envelope>
This request pulled the project from the second instance.
V/r,
Gene

How can i insert data into DB from my page programatically in Oracle ADF..?

Hai, this is praveen.
I have created an EO and VO, when i have inserted data by dragging and dropping from DataControl -->Operations-->Create. I have successfully inserting data. But how can i do it programatically. What are the pre-defined steps that i can use over there to insert data into table programatically. Could u plz help me?

Hi,
You have to create an action Listener in the bean for any button.
Then call an AM method.
In that you have to do the following
ViewObject yourVO = getYourVO();
Row r = yourVo.createRow();
r.setAttribute("Column1", value1); //the name of column should be as it is in your vo attribute.
yourVO.insertRow(r);
this.getDbTransaction().commit();
Thanks

How to access .asmx Web Service using JAVA? Newbie

Hello Experts,
Currently, I have a project where in I have to access a ,NET web service. It is made of C#. I just want to ask how will I start the accessing process? I made this simple equation on how my project is.
Java Project + C#.Net Web Service = Integration
1. Do i need to create a Web Service too for the Java Project? If yes, What are the necessary tools needed for the creation of this Java Web Service?
2. The .NET Web Service is available online. (It is made by other people).
3. Based on the equation, what is the equivalent technology for the + sign?
4. Can you site a concrete example for accessing a web service?
5. I'm new here. Totally I have no idea where to start.
6. Thank you experts.
Edited by: Benedict.Aluan on 05 30, 08 1:38 PM
Edited by: Benedict.Aluan on 05 30, 08 1:39 PM

Hello
Thanks a lot for your help ...
I am developing simple J2EE based web service client using IBM WSAD 5.1. I have used the following code to call .asmx web service in Java
String url = "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl";
     String namespace = "http://tempuri.org/";
     name = request.getParameter("txtName");
     try
          System.out.println("In Internet Service");
          ServiceFactory factory = ServiceFactory.newInstance();
          Service serv = factory.createService(new URL(url),new QName(namespace,"TempConvert"));
          System.out.println("Got Service......");
          Call obj = (Call)serv.createCall();
          System.out.println("Got Call......");
          obj.setProperty(Call.ENCODINGSTYLE_URI_PROPERTY,"");
          obj.setProperty(Call.OPERATION_STYLE_PROPERTY,"wrapped");
          obj.setTargetEndpointAddress(url);
          obj.setPortTypeName(new QName(namespace,"TempConvertSoap"));
          obj.setOperationName(new QName(namespace,"FahrenheitToCelsius"));
          obj.addParameter("param1",XMLType.XSD_STRING,String.class,ParameterMode.IN);
          obj.setReturnType(XMLType.XSD_STRING);
          System.out.println("Parameters Set.....");
          Object[] params = new Object[]{name};
          k = (String)obj.invoke(params);
          System.out.println("Result: "+k);
     catch(Exception e)
        System.out.println("Exception is : "+e);
    }But this code is throwing exception that
Invalid Address "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl"I have also tried this URL with Java Proxy. But it showing the same error.
Plz can u tell me how to access .asmx web service ?
Waiting 4 reply.

How to access existing Web Service

I want to access the web service (SOAP) from java classes.
Can Any body help me by sending sample code providing that how to send my XML content to the existing web service and get the response from that.
I want to further analyse that it is succedded or not from the response of web service (the response is also in XML).
Thanks,
Dipen.

You are in the wrong forum - web services are not available with Sun webserver. Speaking of examples to check out, I would recommend you to install Sun appserver 8.1 or 8.2 and check examples that come with it, specifically in "samples/webservices" and "samples/xml" directories.

How to access the Web Service Browser

Hi,
I need to access the Web Service Browser to generate a Web Service Description.
How can I do it?
I use the follow url:
http://<host_name>:<port_number>/sap/bc/bsp/sap/WebServiceBrowser/search.html?sap-client=<relevant_client>
but I can't say how to determine values for the three placeholders.
Help me please.
THANKS

Hi Andrea,
you can access the web services in sap transaction SICF. Then right click on the
service and choose "test". The hostname is the host on where the sap system
runs.
The port ´number can be seen in transaction SMICM -> shift + F1. Here you can see
the portnumer assigned to the HTTP protocol.
And the client is the sap client (standard client) for which the service is configured.
Hope this helps.
KR,
Andreas

How To Access HTTPS Web Service in Application Module

I need to know how to access HTTPS web service in application module.
If you can provide the tutorial or guidance to achieve this really appreciate.
Thanks
Sameera

Use the Web Service Proxy wizard in JDeveloper to create a class that calls your Web service, and then call this class from code in your AM.
http://docs.oracle.com/cd/E16340_01/web.1111/b31974/web_services.htm#CJAHGIEF

How to access a web service from a XLet

Hello,
I am new in software development to ITV and I dint find too many usefull information teaching how to access a web service from a XLet running in a STB. Are there anybody who can give me some help, maybe sample or tutorial?
Gratefull
David

hi,
you can "borrow" the source code from [Yambo a free soft open source presentation engine (AKA XML microbrowser Xlet )|http://www.cineca.tv/labs/mhplab/index-en.html] both local and on a http remote connection.
hope it helps..
bye
andrea

How to use Axis to access a web service through Authentication proxy

Using axis access internat web service is success,but access a web service through Authentication proxy is failure.But other java classes connect through a proxy to the internet which works very well:
please help me ,thank you!!!
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
//this is my access webservice faliure   codes
public class TestClient
   public static void main(String [] args) {
       try {
            System.getProperties().setProperty("http.proxySet", "true");
            System.getProperties().setProperty("http.proxyHost","proxy.com");
            System.getProperties().setProperty("http.proxyPort", "8080");
            System.getProperties().setProperty("http.proxyUser", "username");
            System.getProperties().setProperty("http.proxyPassword","password");
           String endpoint =
                    "http://nagoya.apache.org:5049/axis/services/echo";
           Service service = new Service();
           Call     call    = (Call) service.createCall();
           call.setTargetEndpointAddress( new java.net.URL(endpoint) );
           call.setOperationName(new QName("http://soapinterop.org/", "echoString") );
           String ret = (String) call.invoke( new Object[] { "Hello!" } );
           System.out.println("Sent 'Hello!', got '" + ret + "'");
       } catch (Exception e) {
           System.err.println(e.toString());
   }I get an "(407)Proxy authorization required" error?

I am also looking for a solution. Does any one know how to do through code instead of jvm settings?
Thanks in advance!

How to access a web service(.wsdl) from portal component.

Hi ,
Is there any document/tutorial available on how to access a webservice from portal component ?
I have found this linkhttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/g-i/how to access a web service.htm...
but the urls in the link are not working...
i want to know the steps to access webs service and sample code if some body has already done that..
Thanks for the help.
Lakshmi

Hi Lakshmi,
See the links below:
http://help.sap.com/saphelp_nw04/helpdata/en/f0/581140d72dc442e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a3/918340d990ce62e10000000a155106/content.htm
Hope this helps.
Regards,
Pooja.

Visual Studio 2012: Can't access Sharepoint Web Services because of Discovery Credentials Prompt

Hi.
I've exactly the same problem that is descripted
here, so I'll add its description here.
My SharePoint is 2010
I am trying to access the web services that are located in this url:
http://<part_of_th_url_omitted>/_vti_bin/Lists.asmx. I have no problem accessing
this URL using my broswer, that is, when I type the URL and my browser's address bar and press enter, I can see the list of the services that are available. I encounter no problem by accessing this site through my browser at all.
However, when I try to access the services from that URL (http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx),
a Discovery Credential Dialog box prompts me for my username and password. SO what I do is I enter my username and password that I used to access the sharepoint using my browser, the problem is, the dialog box doesn't seem to accept the username and password
that I enter as the dialog box is keep on appearing.
Below are the detailed steps on how I go about in adding the Web Services.
1. From the Solution Explorer, I right click on the "Service References" folder.
2. From the context menu that appears, I Click on "Add Service Reference...". The "Add Service Reference" Dialog box will appear.
3. From the "Add Service Reference" dialog box, I click on the "Advanced,,," button which can be seen at the bottom-left of the dialog
box. The "Service Reference Settings" Dialog box will appear.
4. From the "Service Reference Settings" dialog box, I click on the "Add Web Reference..." dialog box. The "Add Web Reference"
Dialog box will appear. This is the dialog box where I can type the URL of the service that I want to access. So I type "http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx".
AFter typing that, I click on the Go button (which is the green arrow button at the right of the address bar of this dialog box).
5. After doing that, a prompt dialog box will appear which has the title "Windows Security" and it is aking for my username and password. SO
what I do is I enter the Username and the Password that I use in accessing the sharepoint site (http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx)
6. The prompt seems to accept the Username and Password, but after that, a new dialog box appeared with the title "Discovery Credential" and
it says "The Service 'http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx' requires a username and
password". SO what I do is I enter again the un and pw that I use to access the sharepoint site, the one that I used inm the previous dialog box.
7 After entering the username and the password and clicking the OK button. The dialog box reappears still asking for a username and a password, but this
time, it shows a different message. It says "The Service 'http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx/$metadata'
requires a username and password". SO it really, what oonly changed is the URL, it has now the $metadata at the end. What do I do? I eneter the username and password again.
8. After clicking Ok again, the dialog box reappears, now it says "The Service 'http://<part_of_the_url_omitted>/_layouts/1033/error.aspx'
requires a username and password." Now it shows a very different username. Of ocurse, I still type in the username and password and click Ok.
9. after doing that, the dialog box reappears again and it shows the same message as in step 6. So I do steps 6, 7 and 8 in a loop.
10. When I finally get tired of entering the username and password, I click on cancel. The message box reappears again. So I click on cancel again. After
doing that, I can then, surprisingly, see the list of the web services. However, not surprisingly, I still can't use it because the "Add Reference" button which I need to click in order to use the Web services is disabled. So I can only see the list
of the services but I can't use it.

Hi Gaston,
I would suggest you the following thread, check whether it meet your scenario, it shows that if you have set IE options to remember the username and password, and you have enter wrong password before, this issue may happen:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/a7f466a5-0e4a-4f75-ad29-9591e2357e10/sharepoint-web-services-visual-studio
Thanks,
Qiao Wei
TechNet Community Support

How do you access a web service to insert data into table?

Similar Messages

Maybe you are looking for