How do you bind a 64bit integer for input?

Is there any way to get oracle to deal with 64 bit integer bind values or must I bind
them as strings?
This is on intel linux.
Thanks,
Alex.

SQLT_INT would be sufficent on a 64bit platform.

Similar Messages

How do you bind Vista / XP clients to Open Directory?

I have an OSX Server OD Master set up in 10.5.6.
My OSX Clients can bind to it just fine using Directory Utility.
How do you bind Vista / XP clients to Open Directory masters?
Thanks

@ jakelh:
Make sure Kerberos is working on your server. Without it, PC logins will probably fail at least for Vista clients. Otherwise you'd have to downgrade a client-side setting on the Vista clients,
http://www.builderau.com.au/blogs/codemonkeybusiness/viewblogpost.htm?p=33927074 6
DNS is critical here, but Vista can have a problem with things that are correctly configured.
IE: Vista defaults to a TCP/IP setting that can make it incompatible with existing network hardware
http://www.tech-recipes.com/rx/1744/vistatcp_cannot_communicate_primary_dnsserve

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you change the Apple ID for my iPhone 4?

How do you change the Apple ID for my iPhone 4. I am able to access my iTunes account using my new ID and password on my computer; however, my iphone has a different Apple ID and I do not have cannot access iTunes on this phone.

Also, if you have iCloud, you will probably also want to change the iCloud account on the phone to be yours:
Settings>iCloud - if Account is not yours, go to the bottom and Delete Account. Then sign back on with your iCloud account info.
Cheers,
GB

How can you unlock a iphone4s sprint for a family member in russia?

How can you unlock a iphone4s sprint for a family member in russia? i sold it to them but when they took it back to russia is locked them out as if someone has stolen the phone.

Contact Sprint to see if they offer unlocking and if you qualify.
Only the wireless carrier to which the iPhone is locked can unlock it.

How do you change the pink highlight for the present day in calendar when in week view

How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

How do you set the font color for a specific entire row inside a JTable?

How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.

hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
     setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
     if(isSelected == true)
          setForeground(Color.red);
     else
          setForeground(Color.black);
     setValue(value);
     return this;
regards,
bala

HT2404 how do you get your money back for software that does not perform as advertised?

how do you get your money back for software that does not perform as advertised? I purchased the batch coverter to watch .swf video which it states it supports, but it will not open the files and I want my money back!!!!!

tell Apple. http://www.apple.com/feedback/
iTunes Store Terms and Conditions specifically states: All sales and rentals of products are final.

How do you find your account history for what you have purchased through iTunes?

How do you find your account history for what you have purchased through Itunes. I have purchased apps for my Iphone and music and want to see a listing of where my money went. I use an itunes card so I can keep an idea on how much I have spent.
Thanks.

iTunes Store & Mac App Store: Seeing your purchase history and ...

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

How do you change the default setting for RTF documents from TextEdit to MS Word

How do you change the default setting for RTF documents from TextEdit to MS Word, I download forms from the Canadian government and they use RTF as a standard, they are supposed to open as MS Word documents (Yes I have Office for MAC 2011) but when download the document it goes to TextEdit which messes up the form format. I can down load it right click and go "open with" MS Word but how can I get the default chnaged to save this step.

richr604 wrote:
Thanks I knew this, I like Safari as I want to keep everything MAC, but if I use Firefox the documents open in MS Word straight away, I was just curious if there was some setting I could change?
In Firefox > Preferences, click the Applications tab. If RTF is there, use the pulldown menu in the Action column to pick MS Word. If RTF is not there, there are instructions here for how to add file types.

How do you determine the optimal size for Mozilla Firefox?

How do you determine the optimal size for cache in Mozilla
Firefox? I am using Firefox 7.0.1 on a 64-bit Windows 7 Ultimate operating system with 3GB RAM and 300 GB hard drive, but I have other computers running Windows XP. If the answer doesn't apply to all current versions of Firefox on all supported Windows operating systems, please explain the differences. Is there a formula for calculating the best cache size?

I found that the best idea is to let Firefox decide that itself.

How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some

Hi
As my topic says
How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.

I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly. In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location.
But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line. No one is looking at the page. A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice. It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
So I would say, fine if you need them or want them there, it's just one word.
I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want. I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have.
I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
You may not experience the same results with your plug-in, but I think it will probably work the same way.
Give it a try and best of luck.

How do you change/adjust border width for all the cells in a table created in Pages?

How do you change/adjust border width for all the cells in a table created in Pages?
Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
Btw- I'm assuming it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me know if this is not actually possible in Pages

They know perfectly well what they took out of Pages '09.
Well over 90 features.
Do you think you posting feedback is going to remind them of what they did?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

How do you bind a 64bit integer for input?

Similar Messages

Maybe you are looking for