How do you change image size in the title window?

I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case. When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

Thank you again for responding Hunt. I did find out what what was happening.
I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
Terry Lee Martin
Date: Mon, 17 Aug 2009 16:04:16 -0600
From: [email protected]
To: [email protected]
Subject: how do you change image size in the title window?
Welcome to the forum.
That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
What happens if you choose Title>New Title>Default Still?
Good luck,
Hunt
>

Similar Messages

How do I change font size on the safari tool bar

How do I change font size on the safari tool bar

You can't in Safari.
However you CAN with Firefox and the add-on called Theme Font & Size Changer, also include NoSquint and set a global web page zoom level a bit higher, say 150%.
NoSquint has buttons on the tool bar to increase/decrease each websites size AND IT REMEMBERS IT!
Under the Tools Menu > Customize you can add more toolbars as well, but they have to have something in it of course.
(note: the green with yellow type is a person you can add from thousands of choices, it's not the default look of Firefox)
So this setup, although it may appear large here compared to Safari, is fine on my 17" when sitting back about 3-4 feet, takes up about 1/6th of the screen, so I'm not hunched up close, and I have a lot of screen real estate to play with anyway.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
Sorry, but for the time being, that's about it.
Best,
Gary

For Adobe Acrobat X Pro how do you change font size Acrobat in form editing mode?

For Adobe Acrobat X Pro how do you change the font size when Acrobat is in Form Editing Mode? The fonts are different sizes in the highlighted fields. I want the font the same size throughout my document...

Dear Michael:
The documents do not look professional with the 2 different font sizes. And it
is driving me crazy because I cannot figure it out… But I will try the steps you
gave me to change the font size. Attached via e-mail is a screanshot of the
document.
Sincerely, Lisa

How do I change image sizes in Aperture?

I am trying to reduce my imae size so I can add watermarks for export to Facebook. How to do?

Set the pixel size in the Image Export Preset.
Message was edited by: Kirby Krieger -- screenshot added.

How do you change your email in the mail app on macbook air

Anybody know how I can change my email under my mail app on my macbook air? I accidentally wrote in wrong email

Hello there, KaelahKirstan.
The following Knowledge Base article reviews the steps for removing and adding accounts in the Mail application on your Mac:
Mail (Yosemite): Set up Mail with your email accounts
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to set a fixed size for the browser window on startup?

so the browser window has the same size and location on the desktop every time i open a new window???

In a 2D coordinate system the horizontal values are represented by some letter, usually x. In the same coordinate system the vertical values are classically represented by y.
Note: In your code, if you wish, you can replace x and y with anything you desire--p and q or perhaps jeff and alice or any variable name you wish, but for simplicity, and usually ease of understanding because almost everyone has had 100's of math problems drilled into their head with (x, y), x and y are used as convention.
In Java the screen coordinates run from 0 to the width-1 for x and 0 to height-1 for y of the component you are using to display.
So logically when you have a value of x or y that goes beyond the addressable bounds of your display, then you have to make some type of adjustment--when your value dips below 0, you reset it to 0, when your value goes above what ever width-1 or height-1 then you have to set that value to width-1 or height-1.
This all assumes that when you hit the wall, floor, or ceiling you stick there until you change directions--if you wish to wrap then you set your value to the opposite bound--so if you go below 0, you would then pop out back in on the right side--your appropriate x would be set to width-1 instead of 0 and in the case of y going below 0 your y would be set to height-1. This is also to say that when you descend below your minimum, then you would pop back out on the opposite side you went out on--so x greater then width-1 would get set to 0 and y greater than height-1 would get set to 0.
That is not even a start on if you want to include elastic collisions, angle of impact, any type of deceleration force, or anything else.
In any case... I would recommend that you add more math to your studies, I've never met an engineer or computer science grad that said: "Wow, I really regret taking all that math in college (or HS), I never use it."

How can you stop slideshow from resizing the browser window iframe ?

Does anyone know where the code is that causes the iweb slideshow to resize the browser window when it is opened?
When it is placed on a page using <iframe src="http://homepage.mac.com/coreydee/slideshow/index.html" width="760" height="580" scrolling="no" style="border:none;" frameborder="0"></iframe> It resizes the browser window when it starts.

Does anyone know where the code is that causes the
iweb slideshow to resize the browser window when it
is opened?
When it is placed on a page using <iframe
src="http://homepage.mac.com/coreydee/slideshow/index.
html" width="760" height="580" scrolling="no"
style="border:none;" frameborder="0"></iframe> It
resizes the browser window when it starts.
The iWeb .Mac slideshow, which you previously tried to add in an iframe, does have a function to resize the window. But it would not cause the whole window to resize, just page within the iframe so you would never know.
However, the autoviewer one you are using should not do this.

Changing Paragraph Spacing in the Title window

How can I change the paragraph spacing in Adobe CS6 Premiere Pro Title Window? When I adjust the Leading, the lines are too close together while the space between my lines (after I hit ENTER) is still too far.
Must figure this out!
Thank you in advance for your help!
SportStir

Yes, you are correct, but I would like the ability to adjust the spacing between the lines independently.
In the example below, all lines are spaced equally between them, so the spacing between lines 3&4 looks appropriate. However, I would like to make the spacing between lines 1&3 and 4&6 about half a lines worth of space, while keeping the same spacing between lines 3&4.
1. Title
2.
3. Blah blah blah
4. blah blah blah
5.
6. more blah blah blah
Hope this helps further explain my dilemma.
Thanks again in advance,

How do you change your password in the new BT Mail

I have 3 email addresses (master and two sub accounts) which I like to change the passwords on from time to time. From within BT Mail I am unable to find an option to change the password. There is a link to Manage your emails which takes you to My BT. When I enter My BT and enter the Manage BT mail I am presented with a list of my emails. One of them shows an option to change password, the other two have option to add to BT ID. I tried adding these to BT ID but get an error message telling me that this can't be done. I then contacted BT support, big mistake, after the support tech took over my machine and subsequently began changing passwords on accounts I lost access to my emal and My BT. I have now got access to all areas again but the passwords on the two sub accounts are the passwords that the tech put in there, hardly secure? Anybody know how to change the passwords if sub accounts are not linked to your BT ID?
Solved!
Go to Solution.

It appears flytothemoon found a work around for part of this problem below. I have to say this is another large oversight for BT and their email providing partners. Did anyone actually test the new system before it was rolled out?

How do you change a belt on the HP Designjet T610?

I can see that the belt is frayed and won't let the carriage move. I don't have a problem getting into the machine to fix it, I was just wondering is anyone else had changed out one before.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Designjet board here:
http://h30499.www3.hp.com/t5/Printers-Designjet-Large-Format/bd-p/bsc-414
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do you change network settings at the command line when they were set in the

Ubuntu server setup in a remote location awhile ago, with GUI packages. Currently at
version 14.04 LTS. There is ssh access to the remote server.
After a lot of digging thru typical command line configs and not finding the existing
settings anywhere, it appears the only way to update existing settings -- DNS
name servers, IP's, etc. -- is using a GUI method, such as gsettings or unity-control-center.
However,
gsettings doesn't appear to have those particular items.
Is
the only option to use a remote version of Unity .... or just get someone
on-site and remedy this thru the GUI?
This topic first appeared in the Spiceworks Community

Hi and thanks for your reply,
I used one mini DV Tape for my footage and captured the whole thing into CS6 in one go and so the capture should have been the same throught all of the film. Once I had edited the tape on to the timeline some of the clips are 16.9 widescreen and others are 4.3 standard.
Help!!!!!

How do you set Tab Order using the Articles window in CC?

I am in CC 9.2.
The work flow I described below was working but then I upgraded and alas no joy.
The instruction I found here seems to be obsolete for cc9.2. Tab order through the articles doesn't seem to work any longer.
Basically. I have a log form with 3 text columns and 3 checkbox columns.
I created the first group of fields.
I created the article as instructed.
I then stepped and repeated 10 times.
When exporting to an interactive PDF, its not flowing in the order that I listed them
As the other user stated "object/interactive/tab order" window is way to painful of a process. Can anyone help?

I guess this confirms. Adobe... it worked before... do I need to down version my files? Because I have over a hundred forms I need to create and manually having to set each text box is going to be a major time and budget issue.

How Do You Change the Icons / Change Multiple Icons?

I've learned that to change most icons on the Mac is Getting the icon you want to change, and the icon you are changing it with. You select "Get Info" by holding "ctrl" and clicking on each icon. Then You click on the icon on the top left of the "Get Info" window. This highlights the icon, and now you can Copy it. Now you click on the icon in the other info window, and paste the icon on top of the former.
But
*How Do You Change Icons Such As the Garbage Icon?*
*Is There a Way to Change All Folder Icons At Once?*
i.e. To change the default blue folder icon, to another icon, and make it stick until that preference/setting is reset. And also have it set so the the new icon will appear when I "create a new folder."
Anything is very much appreciated.

Duplicate the audio once editing is done. In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other. Then adjust the mixer appropriately.

How do you change the variable screen on Portal to show Key?

Hi All,
I have a report on our Portal. In the variable screen, the users are asked to optionally enter Cost Centre. When they choose to select values (pressing the button on the right) the singles values which are shown are 'Text' only. I know in analyser, the user can switch by selecting the spanner icon - 'Display Key/Text'
How do you change to Key within the variable screen on the portal?
Many Thanks
Michelle

Thank you for your reply Amrita,
The display in the query had been set to Text & Key as follows
Properties of Cost Centre -> Display Tab -> Value Display Section -> Display As 'Text and Key', Text View 'Standard' and Use Characteristic Setting 'Unticked'
Is there another section that I should be amending to ensure the 'Key' also appears in the variable screen?
Many Thanks,
Michelle

How do you change image size in the title window?

Similar Messages

Maybe you are looking for