How do you change the key of a Logic Pro X loop?

Hi everyone,
I am working on a song in Logic Pro X using one of the loops and I just wanted to know how to change the key of the loop to fit in with the key of the song? The key of my song is C Major while the Loop is in G Major.
Any tips would be gratefully received.
Many thanks.

Jamiesroom wrote:
How do you change the key of one specific loop using the Key/Transpose in the Inspector? Step by step instructions would be great.
Many thanks.
Here is the step-by-step instruction:
Step 1: Select the MIDI Region and set the Transpose value in the Region Inspector to the left.
Step 2: There is no Step 2
If you are a newbie, then I would recommend to have a look at my Graphically Enhanced Manual "Logic Pro X - How it Works" where I explain everything in great details with lots of easy to understand diagrams and screenshots, including a separate chapter about Apple Loops.
BTW: If you have a proper Apple Loop, then it should automatically adopt to the key of your Project. A transpose is not necessary, unless you want to overwrite a phrase to a specific key.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Similar Messages

  • Can you change the color pallet in Logic Pro X?

    Hi there,
    Is it possible to change the colors on the color pallet in Logic Pro X?
    They are too dark for me.
    I would appreciate your replies.
    Thanks and cheers,
    GJ

    @ Eriksimon:
    Thanks for your help.
    Now, I understand that it's a little different. Basically, you can change the values (ranging form 1 to 360) for the 24 upper fields of the Color Palette. (Logic derives the bottom two rows from the top one, making it darker). These values refer to the Hue-color circle. So, you can't change the saturation or lightness ... that's what I was looking for.
    Anyhow, I did change some of the values. In this case it starts with 360 ("real" red) for the first region (01), followed by 15 for the second, 30 for the third etc., stretching over the whole spectrum. (The original values range from 14 to 312 only.)
    Thanks again for your hints.

  • How do you get the piano roll on logic pro x to show 1/64th notes?

    On the piano roll in Logic Pro X the grid only shows like 1/16 notes. I want to be able to zoom in and have the grid at 1/64 notes.

    Transport is at the top center of the Logic window. If you click on the "/16" which I circled in red, you will get a drop down menu to change the the note length you want.
    Your transport may look different and might not have the "/16" right now. I have a custom transport displayed. "Custom" can be selected by clicking the "gear" icon on the left of the transport. Various options for what to display in the transport can be accessed by right-clicking in the transport bar and selecting "customize transport and display." The option you are looking for will be in the "LCD" section - choose "custom" and check the box for "signature division."

  • How do you change the backdrop in final cut pro from a blue screen?

    How do you edit a blue screen clip?

    See reply in your other post.
    The blue screen clip has to be positioned above the normal background clip of course.

  • How do you change the theme of your macbook pro while still having lion?

    I would like to have it look like the old 10.4 look. Any suggestions?

    I want the old 10.4 look of the old macbook. In windows they had options where you can choose either the vista view or the classic windows look, etc. I was wondering if MacBook Pro had that feature where even though you have updated software such as Lion, you can still retain the same look your desktop had when you had the 10.4 version.

  • Is there anyway to organize icloud photo steams into abc order? and can you change the key photo image??? makes me crazy!

    I am searching for ways to organize my photo streams...alphabetical preferably.
    Also how do you change the key photo from something random that i did not choose to be the key photo (in the photo stream/icloud mode).
    Thank you!
    sue

    As far as I can see, sue, the shared Photo Streams will always show the photo last added as the key photo. So just make sure the last photo you add is a photo like to see as the key photo. I do no know of any method to arrange the photo streams alphabetically. My photo streams are neither shown in chronological order nor in the order I created them.

  • How do you change the shortcut keys for Firefox in Welsh For Mac?

    I'm using Firefox in Welsh on Mac (asking in English to hopefully get more answers), and every time I try to do the shortcut for copy (cmd+C), it hides the window (since Hide in Welsh is Cuddio, the shorcut for that is now Cmd+C). I usually forget this, and proceed with using the shortcut for copy only to anger myself when I realise that I've hidden the window.
    My question is, how do you change the shortcut keys on Firefox so then I can change the Hide shortcut and give Copy the cmd+C shortcut? I'm also using OpenOffice.org in Welsh, and they are using cmd+C for copy and cmd+H for Hide.
    Is there any way that I could do this myself? Its rather annoying for me, and its rather weird to use Cmd+X for Cutting text instead of copying.
    Thanks.

    This could be worth a bug. It shouldn't happen that some shortcut keys get (re)used for other actions and Cmd + C should be considered as one of them.
    You can try to make the change in this file: cy.jar/locale/browser/baseMenuOverlay.dtd
    <pre><nowiki><!ENTITY hideThisAppCmdMac.label "Cuddio &brandShortName;">
    <!ENTITY hideThisAppCmdMac.commandkey "C"></nowiki></pre>
    English language pack: en-GB.jar/locale/browser/baseMenuOverlay.dtd
    <pre><nowiki><!ENTITY hideThisAppCmdMac.label "Hide &brandShortName;">
    <!ENTITY hideThisAppCmdMac.commandkey "H"></nowiki></pre>
    You can find the file cy.jar in the chrome folder in the Firefox application folder.<br />
    The file cy.jar is a ZIP archive, so you need a program that can open such an archive and edit the file baseMenuOverlay.dtd.
    I'm not on a Mac, so can't do any testing in this matter. I just downloaded the Welsh (cy.xpi) language pack for Mac and had a look in it.

  • How do you change the variable screen on Portal to show Key?

    Hi All,
    I have a report on our Portal.  In the variable screen, the users are asked to optionally enter Cost Centre.  When they choose to select values (pressing the button on the right) the singles values which are shown are 'Text' only.  I know in analyser, the user can switch by selecting the spanner icon - 'Display Key/Text'
    How do you change to Key within the variable screen on the portal?
    Many Thanks
    Michelle

    Thank you for your reply Amrita,
    The display in the query had been set to Text & Key as follows
    Properties of Cost Centre -> Display Tab -> Value Display Section -> Display As 'Text and Key', Text View 'Standard' and Use Characteristic Setting 'Unticked'
    Is there another section that I should be amending to ensure the 'Key' also appears in the variable screen?
    Many Thanks,
    Michelle

  • How do you change the default size of the print batch size for mail merge in Publisher 2010?

    I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
    the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
    suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
    prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
    pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
    2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

    It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

  • HT2513 How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

    How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

    Jerry,
    Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
    Hey presto, I've got the @ where it should be. Excellent.
    However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
    Very strange. I'll look at other keyboards and see where that gets me.
    Thanks,  Maz

  • How Do You Change The Name Of A Folder?

    I have a very simple, almost ashamed to ask, question. How do you change the name of a folder? As always, thanks in advance.
    800 mz Flat Screen iMac   Mac OS X (10.4.4)  

    Howard,
    Click (select ) the folder, hit the return key and start typing...
    Before you start typing, you can go to the beginning, or the end of the title without deleting the title by using the back/forward arrow keys.
    ;~)

  • How do you change the channel of the device?

    How do you change the channel of the device?

    Isn't there a way to see what channel it is on so one can choose a different channel?
    Hold down the option key on your Mac while you click on the fan shaped AirPort icon at the top of the screen.
    If you want to manually set the channel on an Apple router, you would use AirtPort Utility for this.

  • How do you change the minus symbol on the quick selection tool to a plus symbol? im finding it difficult to select an area.

    how do you change the minus symbol on the quick selection tool to a plus symbol? im finding it difficult to select an area.

    You can use the Alt/Option key to toggle between add + and subtract -
    http://helpx.adobe.com/photoshop/using/making-quick-selections.html
    First though select the Add to Selection in the tool options bar for that to work.

  • How do you change the background color not of the video clip, but the background the clip is on?

    How do you change the background color upon which the clip resides...
    I don't want to change anything within the clip itself, but the matte(?)
    from black to white or cream.
    I am working with Elements 10...

    Create a color matte of the desired color and place it on video track 1.  Then place your video on track 2.
    from here: Adobe Premiere Elements Help | Creating specialty clips
    Create a colored matte for a background
    You can create a clip consisting of a full‑frame matte of solid color, which you can use as a solid background for titles or animated clips.
    Brightly colored mattes can serve as temporary backgrounds to help you see transparency more clearly while you adjust a key effect.
    Click Project Assets. 
    In the Project Assets panel, click New Item from the panel options and choose Color Matte. 
    Choose a color in the Adobe Color Picker dialog box, and click OK. 
    A color matte clip is placed into both the Project Assets panel and the Expert view timeline.

  • How do you change the 4 seconds preset duration when selecting clips?

    When you select piece of clip in an event, how do you change the 4 seconds preset duration?

    Hi
    in iMovie'11 (as I don't have any iMovie'13 (v10)) and You note that You also use iM11
    Go up to the top row Menu and select "Setings" (Inställningar)
    and here select Browser (Bläddrare)
    and at bottom of this You got three options
    and can select ALL or up to 10 seconds
    I use click + alt (option-key) to select all of the Clip in Events - then fine tune it in my project.
    Good Luck
    Yours Bengt W

Maybe you are looking for

  • Can't ping other server and more.

    This is a weird one. I have a few problems going on. I have 2 netware 6.5 servers. My BM3.9 sp1 server is on Netware 6.5sp7 and my other server is Groupwise 7.03 on Netware 6.5sp6. My Groupwise server is strictly used for Groupwise. My BM3.9 server r

  • Sent Touch in for repair...they're sending it back...are my files gone?

    Hello all, I just sent my iPod Touch 3G (64gb) to Apple for repair. I recently got the following email... Thank you for choosing AppleCare Service. Our technicians have performed full diagnostic checks on your IPOD TOUCH (3RD GENERATION) and have bee

  • Display settings on DVD player

    I'm authoring a DVD for a live show. The disk has 30 or so tracks with 30 menus. ie. track one finishes and jumps to menu two untill operator presses enter etc etc.. He needs to be able to see what menu is loaded on the dvd player display. Can anyon

  • Problems with replying to messages 6210 navigator

    I have the 6210 navigator and when I reply to messages that are in my inbox and then press send (no i do not save them I send them)  They - at random - go into my drafts box. Its very frustrating as I think I have replied to my messages and then figu

  • Convert Selection for iPod...causing Unexpected Quits!!

    I have 2 video thta I want to play on my BRAND NEW IPOD :)!!!! When I click convert selection (for) iPod it starts but iTunes unexpectedly quits!!! Music transfers fine. Do I need to use 3rd party software to convert these to iPod format?!?!? This is