How do you change the speed of a detached audio clip?
I have a piece of detached audio. Video Frame rate is 23.98. The piece of Video above it is Video Frame Rate 24.
How do I change the speed of this detached audio clip?
Nope, the Automatic Speed did not work. I exported the XML, and then ran it through X2Pro to try and get my AAF, and it still spits out conform warnings/errors on those same spots. Automatic Speed apparently did nothing helpful to my situation. (Can Anyone explain Automatic Speed?)
Will have to try going through Cinema Tools per the similar issues noted in this conversation: http://forums.creativecow.net/thread/344/28007
Curious to see what FCPX would do with this media, importing the 24p file to a 25 Project cause a noticeable shift in both time and pitch.
I imported the time coded audio separately, and played it against the obviously speed and pitched changed video with embedded audio. The files did not sync.
The audio remained in time and pitch, while the video didn't. So the audio tc doesn't seem to effect playback in FCPX, but video definitely does, and it seems rather buggy.
So, if your video is 24.0 and your audio is 23.98 and you are in a 23.98 timeline, FCPX might be changing the speed of the video without really reporting it. Resetting speed doesn't do anything, hitting "automatic speed" screws it up a bit more (it goes the wrong way). Changing the speed to something like 96% (FCPX reports 96% but I know it's really ((24000/1001)/25) which is just short of 96%. Turning off the "preserve pitch" checkbox actually pitched the audio back to normal.
I didn't create the 24.0 vs 23.9 media that you have, but perhaps you are having similar issues, or a different combination/permutation therein.
But to answer your question, the time coded audio was not changed, only embedded audio.
and
But here some notes which makes things hopefully clearer.
Resampling and changing playback speed are two totally different things.
Samplerate for audio is the same as fps for video (not dpi for video) so let's call it sps.
You can record audio at any sampling rate. But let's take 48 kHz and 32 kHz here.
Record 60 seconds. Once recorded both files as stand alone files will play 60 seconds.
But forced to play back in a NLE timeline with a fixed sps of 48 the first file will playback correctly. The second one will play at 2/3 of the time (32/48). The other way round the 48 sps file will play longer in a 32 sps timeline.
Now for those poor guys who have to work with NTSC:
A real world second is not a second in NTSC video world. Its 1001/1000 seconds.
So selecting a 48k sps audio preset in a timeline preset means that a real world audio of 60 seconds is only 1000/1001x60. That means that those 60 seconds are only 59.94 seconds long. Its too short.
One way - if you stay strictly in NTSC - is to record audio with 48048 Hz. This way a real world 1 second audio will match a 1 second NTSC video.
Next option with BWAVE files is to change the playback settings in the BEXT header of the file. This won't resample the file!!!
Now about the TC. BWAVE doesn't have a TC in a way you're used when handling video. It has a timestamp in the header. This timestamp contains the Samples after Midnight. Based on that the NLE will convert this to TC which can be displayed. So in NTSC world this might give a wrong interpretation.
For example if you have a "Start TC" of 00:10:00:00 (thats what you see on your audio recorder) it means that using 48kHz the timestamp is at 600x48,000 = 28,800,000 samples. Since the real sampling rate in the timeline though is 48048 Hz you have to divide the source stamp by this number. This results in 9.99000999000999 minutes. So for a 23.976 fps project this is a TC of 00:09:59:10.
So setting the Bext header and/or iXML chunk to the correct playback speed will keep everything intact. Again this is without resampling!
Using an AIFF there aren't these options.
So you can edit all the stuff without resampling when using BWAVE. But resampling will happen when you export a final movie.
Similar Messages
-
How do you change the speed of an entire track??
I imported a song from my iTunes and want to slow it down and I don't know how to do this - very frustrated!!!!! Please help.
Thankshttp://www.bulletsandbones.com/GB/GBFAQ.html#changeimportedtempo
(Let the page FULLY load. The link to your answer is at the top of your screen) -
How do you change the fan speed (rpm)
On a mac, how do you change the fan speed to 7200 or something?
As was mentioned, installing smcFanControl will do this:
http://81.169.182.62/~eidac/software/page5/page5.html
However, as others have indicated, you should determine what the issue is. For starters, is your machine actually running hot? Have you run something to let you know what the actual temperatures are? Setting the fan at max speed will make your system noisy, will reduce the fan life, and significantly reduce your battery charge. -
Crrystal Reports using ADO. How do you Change the Isolation Level?
Post Author: jmetaxas
CA Forum: Data Connectivity and SQL
Crrystal Reports using ADO. How do you Change the Isolation Level? I found a knowledge base article that allows you to change it for ODBC. But nothing on ADO. I kicked around changing the reports to ODBC but even then the keys described in the article do no exist. Any suggestions?
Thanks,
John MetaxasT-Bob wrote:
I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?
Specifically to address this point: if you mouse over the audio levels' rubber band segment BETWEEN your points 2) and 3) until the cursor changes to an up/down adjustment arrow ⬍, and move it up/down, it will adjust BOTH the levels at 2) and 3), maintaining the relative difference between them (or, if points 2) and 3) start at the same level, this adjustment will keep them equal as you drag them both up/down together in one action.)
As usual, much easier to DO it, rather than describe it! -
How can you change the name of a wireless network set up with an airport express
Yes, you can. If you use the current AirPort Express, Apple says that you can connect up to 50 devices. Realistically, make that 25-30 or so before the speed really begins to drop.
Remember that you will have to reset the modem though, before you connect it to the AirPort Express as the modem "remembers" the settings for your computer. -
HT5312 How do you change the email address used to send security answers?
How do you change the email used to send the security answers you have forgotten? I have changed the alternative email adress in Name, ID and Email Addresses but this does not change the email address in the Password and Security section.
Jus what do you want to accomplish? The Apple ID email address is used for variosu thing onthe iPod like:
- For purchasing media. Srrings.iTunes and App stores. Sing out and sign into anoterh account
- Settings>iCLoudl for iCloud account
- Settings>FaceRome for Apple ID and where You can Be Reached At email address
- Settings>Messages for Send And Receive email address.
- Maybe for Game Center -
Hi....How do you change the name? When I sync my iPhone, it shows my wife's name on it?
Unfortunately it is not doing it....
Let me give more details..We have 3 iPods and 2 iPhone4....I recently purchased the iPhone4 and when we connected it..It was already reading my wife's iPhone4..We went to the Apple Store at the Grove today and was told to de-authorize the system and connect my iPhone4 back and I should be able to change the name.
Nothing happened..Right now, I clicked on RESTORE settings...and it is uploading a new iPhone update. -
I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?
See https://discussions.apple.com/message/19218571#19218571.
-
How do you change the Apple ID for my iPhone 4?
How do you change the Apple ID for my iPhone 4. I am able to access my iTunes account using my new ID and password on my computer; however, my iphone has a different Apple ID and I do not have cannot access iTunes on this phone.
Also, if you have iCloud, you will probably also want to change the iCloud account on the phone to be yours:
Settings>iCloud - if Account is not yours, go to the bottom and Delete Account. Then sign back on with your iCloud account info.
Cheers,
GB -
How do you change the pink highlight for the present day in calendar when in week view
How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick
the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site. -
How do you change the color of events on ICal.
How do you changed the color of events on ICal? I was able to do this when I utilized ICal on the Snow Leopard system but can no longer do this with Lion.
I know that I can select the Calanders list, but when I create a new "Calander" it doesn't allow me to choose a color and it doesn't show up in my list when working within an event.
Thanks!Phoebe,
Right-click on the new calendar and select "Get Info."
Make sure that the ✓ mark is selected.
Then choose the color from this pane: -
How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong and the password is also wrong. HELP
Go to Settings>Store>Apple ID. Tap on the ID and sign out. Then tap on "sign in" and sign in with the correct account.
-
How do you change the default size of the print batch size for mail merge in Publisher 2010?
I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.
-
How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.
Sorry but you cant
-
How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"
Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz
Maybe you are looking for
-
How can I separate 2 ipads which are on the same account?
I have an ipad and my husband also recently bought one. Unfortunately my son set my husband's ipad up on the same account as mine so we now have exactly the same music and photos on both plus my Gmail account is sending the messages to both. How ca
-
Mass maintainance of material master
Dear Gurus, We want to maintain some missing field on the MRP views of the material masters for all materials(FERT, HALB AND ROH). Pls what T-CODE or how can we maintain this since the materials are up to 10,000 in all. Thanks
-
i'm retiring my old computer (with windows xp) and bought a new computer (with windows 7). How can i easily move my itunes music from the old computer to the new computer? i have my playlists organized in my old computer, i would like it to stay that
-
Apple Password doesn't work when it is the correct password
A few days ago, in the middle of playing music on iTunes, I was no longer able to sign in. When I tried to sign into Apple that day, my password (which I know was correct) didn't work. So I reset my password. Today I tried to sign into Apple with the
-
Error in running sun portal server 7.2 on windows platform
I have downloaded portal-7.2-windows-x86.zip Extract it at C:\ Run C:\PS7.2\setup.bat Opened: http://localhost:8080/portal/dt The following error was displayed: type Exception report message description The server encountered an internal error () tha