HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP

HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP
How do you change the window size for Ebusiness Suite after you log in. Currently it displays at 100% of the screen. I want to set it smaller, at some %

I don't know if there is a way to set this. Some user's may prefer different sizes of window, depending on their job duties. For example, we have 170 Systems document management integrated with purchasing and payables so users shrink the Oracle window to fill about 60% of the screen while 170 uses the remaining 40% to display the scanned document.

Similar Messages

  • How can I change the window size of iTunes?  Used to be easy before installing Mavericks.

    How can I change the window size of iTunes on my iMac?  Used to be easy before installing Mavericks.

    If you want to make the itunes tab so you can see the dock
    you press the
    esc
    button if your in full screen mode
    if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
    there is another way to get to the normal tab if your in full screen
    make the curser go right up to the top of the screen and it will show the apple tab
    it will have two arrows facing together highlited in blue
    if u tap that it will take you to the normal tab

  • How do you change the font size?

    This is a rather simple question.
    How do you change the font size in flex builder 2?
    In the preferences for flex>editors there is no option to
    change any font settings.
    i'm sitting quite far away from my LCD and can hardly make
    out the text.

    Window -> Preferences -> General ->Colors and
    fonts

  • How can you change the font size in the application and system headers?

    How can you change the font size in the application and system headers?  I searched the system and finder prefs to no avail.  Changing the screen density is not a good option.
    Thanks

    I downloaded Tinkertool.  Found the font section and increased the size of most selections.  The only thing that changed that I can see is the window label.  The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4.  Found the finder "show view options" but that didn't seem to change anything either.  I'll keep working.  Restarted all apps after changes as well.

  • How do you change the default size of the print batch size for mail merge in Publisher 2010?

    I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
    the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
    suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
    prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
    pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
    2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

    It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

  • How do you change the ont size

    How do you change the font size for one word ?

    Basically, you need to wrap the word in a <span> tag, and apply either a class or an inline style to the span. Using a class is better because you can reuse it in other pages, or other parts of the same page. Also, changing the font size in the class will apply the changes to all instances of the class. With an inline style, you have to change each one individually.
    To wrap a word in a <span> tag, select the word, then press Ctrl+T (Cmd+T on a Mac) to bring up the Wrap Tag dialog. Type "sp" (without the quotes), and press Enter twice. Then create a class using the CSS Designer. Apply the class to the word by selecting it again, and select the class from the Class drop-down menu in the Property inspector.
    To create an inline style, select the word, and click the CSS button on the left of the Property inspector. Select the font size you want from the Size drop-down menu. If the size you want isn't listed, just type the value in the Size field.

  • How can you change the display size on the task bar

    how do you change the display size on the task bar

    If, however, you want to change the size of the display of the menubar, meaning make the icons and text larger, there is no way to do that directly other than to change the resolution of the screen.
    You can change the as-viewed size of that temporarily by using either -
    • Mouse zoom - if you have a Magic Mouse (Apple wireless mouse), hold down the Control key and use the scroll up and scroll down finger gestures on the mouse.
    • Zoom - go to System Preferences > Universal Access > Seeing and turn on Zoom. You can also use the noted keyboard shortcut to enable/disable this Zoom feature.

  • HT3529 how do you change the font size on your text messaging on the iphone 4s

    how do you change the font size on your text messaging on the iphone 4s

    Settings > General > Accessibility > Large Text.

  • How do you change the mtu size

    i recently bought a WRT54G wireless router and i have my desktop directly hooked up (not wireless) and every time i go to play games or surf the net it has some pretty severe lag spikes. i have done some searching and i see something about changing the MTU to a certain amount but i have no idea what that is or how to change it. so if u have any suggestions for me that would be appreciated

    connect a computer to the router's port#1 and access the router using http://192.168.1.1 . the default password is admin
    on the ui , under the " basic setup " subtab , you have an option to change the MTU size..by default the MTU is disabled...change it to enable and change the MTU size as required...

  • How do you change the font size under the event and iphoto view photos?

    I would like to change the font size in iPhoto under the photos that appear in the Events view and in the Photos view. I was told by a tech at Apple that it cannot be done because it is built into the software. What you see is what you get. That seems unusual because the font size in the Photo view is smaller than that in the Events view. The Font control that exists in File/Edit are for fonts used when you open a photo and add your own captionI and have nothing to do with the various views. Does anyone know a way to do this?   Thanks

    I'm afraid it really is WYSIWYG. It can't be changed.  You can send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
    OT

  • How do you change the font size in grey area of toolbar?

    How can I change the font on the grey area to make it bigger? I updated to mountain lion and it changed the font.

    Those are hard coded, and cannot be changed as far as I know, without delving into the application itself with a code editor.

  • How do you change the image size and resolution in photoshop everytime I change the width the height changes my measurements will not stay

    Can someone assist me with changing image size and resolution.  each time I change the width the height changes and vice/versa?

    There's a chain link between width and height. The point is to keep the aspect ratio the same, otherwise your picture would get stretched.
    You click on the chain-link to shut that off and you can adjust width and height separately.
    Also could you give us your version of Photoshop, what OS you are running it on (Windows 7 for example) and what exactly you want to do with your document?
    Resolution is the print term for how many pixels will be printed on an inch of paper. It doesn't apply if your image is intended for screen viewing.
    Gene

  • How do you change the tex size on firefox

    I can not find a tool bar that has a fonts on it.

    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    Use this extension to adjust the font size for the user interface:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    *https://support.mozilla.org/kb/how-do-i-use-zoom

  • How do you change the font size on a scanned document?

    I scanned a document with very small print and saved to computer in hopes of enlarging font size and cannot understand how to do. Please help.

    Hello, I think you're out of luck with the toolbar, but not on 10.9 to check right now, you can change the minimum font size used in Safari Prefereces for web pages.
    Perhaps Zoom will work for you...
    http://support.apple.com/kb/PH14358

  • How do you change the resolution size of a mp4 file?

    I am looking for a free (really free, not just a trial for 30 days free) program that will allow me to change the resolution of a mp4 video.
    If this is a "parameter" setting issue in DW what would be the parameter and the value?
    The video is here: http://www.argraph.com/Sirui-P-Series-Monopods.html#psSeries.............a little past midway down the page.
    As you see the words SIRUI and the tag line cannot be seen in their entirety.
    THIS is the way it should look.....
    The second image represents a youtube link but my boss said he cannot see it on his laptop or tablet
    and insists that I use mp4 because it works with all formats; iphone, android, pc and mac.
    I tried doubling the size of the file and it worked but was SOoooooo big that it blew the page out so I suspect that I
    have to resize the file.
    Ken? Nancy? ANYBODY?????   Seriously as always any suggestion would be greatly appreciated.
    -Gwynnplaine-

    1. As far as HTML5 support, if they have a browser made within the last few years (I think since about 2009), it supports html5. The page I linked to gives the versions where all of the major browsers started supporting the <video> tag.
    2. The "your browser does not support..." text is what appears on screen when a viewer uses a browser that doesn't support HTML5 (like IE8).
    If you still plan to support the old non-html5 browsers, the best thing to do is to place a fallback video using the old <object><embed> method in that "your browser does not support" location. That way, if they don't have an html5 compatible browser, the fallback video will play using whatever plug-in they have installed to deal with it. It would look like this...
    <video width="320" height="240" controls>
    <source src="movie.mp4" type="video/mp4" />
    <source src="movie.ogg" type="video/ogg" />
    <object width="320" height="240">
    <param name="movie" value="myvideo.swf" />
    <embed src="movie.swf" width="320" height="240"></embed>
    </object>
    </video>

Maybe you are looking for

  • "the file iTunes Library.it cannot be read because it was created by a newer version of iTunes ?

    Having installed iTunes 9.0.3 64 bit for Windows 7 when I try to run I get an error message as above. I have tried uninstalling and re installing but it's still complaining that it was created by a newer version of iTunes ?

  • How to refresh the input text value in backing bean

    hi all i want to know how to refresh the input text value in backing bean? i have tried this code ,but it doesnt work public void click(ActionEvent actionEvent) { tempConId.setValue("111111111111111"); AdfFacesContext.getCurrentInstance().addPartialT

  • Temperature Warning on a Canon C500?

    Has anyone seen a Temperature Warning on a Canon C500?

  • Plumbing data from R/3 4.6c into BW 3.5

    Hi Can we directly pump in data from R/3 4.6c to BW 3.5. Currently we populate changes from PO material and schedule data in R/3 to BW 3.0, using SAP EventManager EM 4.0. Is this feasible?

  • Style Drawer "Sticks"

    When I choose to start a new document from a template, the new document appears to zoom toward me from the Template Chooser. But the style drawer seems to appear at the bottom of my screen just behind the Pages icon on the dock and grow to full size