How do you configure SMTP for emailed alerts?

I'm using the current Mavericks Server. I would like to configure Alerts to email Alerts to me. My server is *not* an email server, so email alerts would have to go out through an external SMTP server. How do I specify the SMTP server that should be used for emailing alerts?

I think the only way to set it up via the GUI is to activate the mail server service and set it to send through the external SMTP server.

Similar Messages

VI Analyzer - How Would You Configure It for This Use Case?

My group has different people working on different LVPROJs for each software deliverable we have. Each LVPROJ uses our user.libs and instr.libs, as well as an overall "framework" that is the same for most LVPROJs.
I really think the VI Analyzer toolkit would be powerful for code reviews, but only if I can configure it in a way where which tests I run and what the criteria are can be saved and used on any project. I can't seem to get this to work for me. I want to save all those configurations, and use it on new LVPROJs easily - the easier I can make this process, the more inclined others will be to use this for code review. How would you do it? (if it's even feasible)
Solved!
Go to Solution.

I suggest creating a .cfg file without a project linkage, but with all the tests selected and configured as you want...so a .cfg file with no "Items to Analyze" specified. Then, when working on an individual project, open that CFG file, add the project's top-level folder to the analysis, then save that CFG file with that project. This means you can't have the project linkage in your CFG file, but assuming your project is all within some top-level folder, that shouldn't be much of an issue, since the CFG file will be "linked" at that point to the top-level folder containing your project.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How to switch language settings for email alerts/notifications?

Verizon has erroneously identified me as a Spanish speaker based on my husband's last name (Pique). Since I have registered for my data usage plan for my iPad, I receive some messages from Verizon in Spanish and others in English. All of my payment confirmations and data usage alerts are in Spanish and I see no way to correct the language preferences online in my user account. I have tried to contact Verizon via telephone but the support person with whom I spoke was less than helpful and I was disconnected before a solution was actually reached. Has anyone had this problem and, if yes, were you able to resolve it successfully and what did you do?
Thanks,
Lynn

Take a look at this link, http://translate.google.com/translate?sl=de&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&la yout=2&eotf=1&u=http%3A%2F%2Fwww.loggn.de%2Fosx-filevault-2-falsches-kennwort-ta staturlayout-auf-dem-anmeldefenster%2F&act=url

How do you configure Firefox for all users on a machine?

I want to
1. Take my existing set-up of Firefox
a. with all bookmarks
b. with all my chosen options
c. with my default start-up home page
d. bypass all the initial Firefox startup screen and "make this your default screen"
2. Have it be the base set-up for all users that log into a machine on our domain.
Is there a config file? Where do I place this config file so when all open their firefox it takes the above settings. I am creating a base image using VMware and will want this set-up so when a user log in with their logon credentials and open Firefox, it already has the above mentioned settings in place.

See CCK Wizard: https://addons.mozilla.org/firefox/addon/cck/
You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
*http://kb.mozillazine.org/Locking_preferences
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes

How to configure SMTP for iCloud?

I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion. When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use. I mainly use a gmail address.
I don't want to use Mail and i don't want mail to be downloaded to it. That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts. i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out. When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there.
Is there anything i can get it to do to configure automatically? All my software is up to date, if that makes a difference.

i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works. So thankfully, this problem is solved.

Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

Here's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

How do you configure Enterprise Server to allow WiFi retrieval of email when in WiFi Area

We have an Enterprise Server and WiFi in offices and homes and lots of free WiFi on our travels. How do you configure the phones/enterprise server to allow this? I cant see any easy option??

Llessur999 wrote:
That is a reasonable approach. Without changing network configuration, I don't see an alternative. A few considerations:
Based on your experience, will the length of time to detect unreachability (a network timeout?) cause a usability issue?
Must you support a scenario where a user transitions LAN-to-WAN or WAN-to-LAN while using the app?
If this is used by a wide audience, will configuring the primary/fallback be straightforward?
I don't think there's a usability issue.
Yes. The app is designed for a brick/mortor location that essentially wants to drive the user to the location. The user has to ability to interact with specific hardware components at the location via server/port communications - some of which they can do while they are remote. While they are on location, they need to retain that ability to interact with local equipment even more. Users could be asked to not go on the location wifi of course but that just seems silly and an overall bad user experience.
The primary/fallback configuration should all be done within code (no user interaction). For example the WAN IP will always be X.X.X.X (be it Public IP or dyndns - makes no difference), while the LAN configuration will always know that the lan server it needs to communicate will always be at a specific LAN IP (192.168.x.x).
It would be godsend to have some sort of API call (or class) that can accept a call to CFStreamCreatePairWithSocketToHost to a specific IP and on seeing that it's unreachable automatically try the secondary IP before returning a failure on the stream.

How do you configure 8.1.7 NT/IFS 1.1 to use Apache for IFS?

Now that the 8.1.7 version for NT and IFS 1.1 is out how do you configure it to use Apache for IFS?
There is no 'ifsapachesetup' file included in the download (the CDs are still not available).
Installed 8.1.7 database on a clean (no oracle) PC running NT server 4.0 sp4.
Installed IFS 1.1 download using default selections except I unchecked the JWS option.
The database works fine and the IFS agents appear to be operating properly.
IFSMGR batch file works fine but how do you access the webui? Have tried ports 80, 8080, 7777, 7070, 100 and nothing works.
null

Hanne ....Greetings. The Apache HTTP server is up and running. Even better, my users can get to it! The URL issue, I think, really put a damper on what was otherwise a pretty clean install. Specifically, on page 9-9 of the Oracle Internet File System Release 1.1 Setup and Administration Guide; Part No. A81197-04, 1-Sep-00, that I downloaded from technet.oracle.com, the ifsapachesetup.exe reference, the port 7777 reference and then the invalid URL sent me round and round for awhile. When I saw Rick Post's post on the iFS Forum and then Brian Ball's response, I knew there was something incomplete about the documentation. When I figured out which parts of the 'system' need to be running, I saw that the /ifs/files URL would work if Apache and ifs were up, and it did.
Also, I think the startup/shutdown of the OracleHTTPserver service vs the Start/Programs/oracle_home/Oracle HTTP server/Start....Stop could be clarified a little more. I did find out that you could accidently shut down the Apache server by closing the NT application window it runs in, whereas, starting HTTPserver from the services Services eliminates this (this I think is in the documentation).
In short, I'm up and running. Neat product. Need an errata in the Release Notes or Installation Guide regarding this URL deal.
thanks
fred

How do I configure Sprint Mobile Email to show my name in the email return address?

I am using Sprint Mobile Email to check & send my Yahoo email on my Palm Centro. When I send emails it only shows my email address in the return address and not my name. I have my name set up in Yahoo but it doesn't get picked up when I send emails from my phone.
How do I configure Sprint Mobile Email to also show my name in the email return address? Everyone may not recognize my email address as being me.
Thank you
Post relates to: Centro (Sprint)

Hello and thank you for using the Palm Help Forums!
You may want to contact Sprint for further assistance with the Sprint Mobile email. However, I can assist you with the built in Email (Versamail) application.
Post relates to: Treo 800w (Sprint)

In mountain lion calendar, the alerts on give you a "close" or "snooze" options. What happen to being able to select how long you wanted to snooze your alert?

n mountain lion calendar, the alerts on give you a "close" or "snooze" options. What happen to being able to select how long you wanted to snooze your alert?

SnoozeMaster is now avaiable from the Mac App Store, for MacOS X 10.8 and up.
https://itunes.apple.com/us/app/snoozemaster/id614955483?mt=12
It addresses this exact issue. You'll be able to configure different pre-set snooze times, enter custom snooze times when an alarm triggers, etc. It's what snoozing should've been from the get go.
More information:
http://on-core.com/snoozemaster/

How do you configure the ipad to print air print but of A4 size please ??????

how do you configure the ipad to print air print but of A4 size please ??????

Frankie,
The usual setting is in Printing Preferences.
In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
I can provide details and "how-to" if you need more help.
Printer model info would be helpful, and do you have your printer software loaded yet?
I hope this helps!
We work hard to help!
When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Dragon Tips!
Install your Printer Software!
Look for your Printer’s Software at your printer’s own website!
Software, manuals, alerts, “how-to” information, and much more!
To see if there is software for your printer, Start at: Support and Drivers
Kind Regards,
Dragon-Fur

How can you configure mail settings in process chains?

HI Experts,
please let me know how can you configure mail settings in process chains?

Dear Suman,
To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
To create mails to Process chains:
Right Click on the Process varient select the Create Message in the context menu.
Select the type of mail i.e for successful, Error, Anyways.
Then follow the screens.
Note: The recipient type should be Via Internet.
Hope this helps u.
Regards,
Kishore.Pulla

How to I configure SMTP?.

I have configured with one mailbox server but it throw the following error
"Failure sending email: com.waveset.exception.ServiceNotResponding: 
==> javax.mail.AuthenticationFailedException: 535 5.7.3 Authentication unsuccessful.&#xA "

How to I configure SMTP?.The following section in Configuration "System Configuration" is for SMTP:
<Attribute name="serverSettings.default.emailtemplate">
<Object>
    <Attribute name="smtpHost" value="@email_smtpHost@"/>
    <Attribute name="fromAddress" value="@email_fromAddress@"/>
    <Attribute name="toAddress" value="@email_toAddress@"/>
    <Attribute name="authEnabled" value="@email_authEnabled@"/>
    <Attribute name="userId" value="@email_userId@"/>
    <Attribute name="password"><EncryptedData>@email_password@</EncryptedData></Attribute>
    <Attribute name="ssl" value="@email_ssl@"/>
    <Attribute name="port" value="@email_port@"/>
    <Attribute name="ignoreCert" value="@email_ignoreCert@"/>
</Object>
</Attribute>Values enclosed by @ characters are placeholders.

How do you configure a farm name in RDS 2012?

I understand Remote Desktop Services has undergo some drastric changes.
How do you configure a farm name in RDS 2012? Or is the concept around farm name changed in another concept?
Although I have imported a certificate on the RDCH withe the farm name I want to use. When I click on a RemoteApp on the RD Web Access portal, it does not connect to the right farm name.
Boudewijn Plomp, BPMi Infrastructure & Security

You don't. You create a collection. A client connects to the Connection Broker and then is redirected to the collection it is connecting to. The collection name is embedded in the connection file that the client downloads from RDWeb or
the RDWeb feed.
A collection is basically at least one RDSH server (for session based desktops) or one virtual machine (virtual machine based desktops).
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

List of values apprear for email alert while scheduling the report

List of values apprear for email alert while scheduling the report

Hi,
Can you please expand on your issue?
Cheryl

How do you configure SMTP for emailed alerts?

Similar Messages

Maybe you are looking for