How do you connect a Xbox360 to a IMac 21'5, Mid 2011

Hey.. This is my first time using the Apple Support website so ye..
I was wondering how you would connect the latest Xbox360 (not Xbox One) to a Mid 2011, 21'5 IMac..
Cheers

Sorry, as far as I know the only iMacs this would work with are the 2009 & 2010 iMacs.

Similar Messages

  • How do you plug a VGA monitor to a Mac mini (mid 2011)

    I used my older Mac mini (mid 2007)  with a VGA LCD monitor through an "DVI to VGA" adapter with no problems.
    However, this older adapter does not fit in the "HDMI to DVI Adapter" supplied with my new Mac mini (mid 2011).
    There are no receptacles (holes) in the "HDMI to DVI adapter" for the four pins located around the flat tab on one hand of the older adapter .
    Any suggestion on how to plug a LCD VGA monitor to a mid 2011 Mac mini?
    I know there is a Thunderbolt port and a HDMI port,
    but being able to use an inexpensive VGA monitor for set-up and periodic maintenance,
    without having to fire up a huge plasma screen each time, would be nice.
    There is no displayport on this mid 2011 Mac mini.
    There does not seem to be any HDMI to VGA nor  Thunderbolt to VGA adapters on the market.
    Any suggestions?

    The > Apple - Thunderbolt Port is the same as and doubles as a Mini DisplayPort.
    Look down at the bottom of > Mac mini (Mid 2011) - Technical Specifications in the Accessories / Displays and Graphics section or on page #33 of your User Guide.

  • How do I migrate data from my 2003 iMac to my mid-2011 iMac?

    Hi All,
    I have a 2003 iMac and I want to migrate the iTunes, iPhoto, etc DBs to my new mid-2011 iMac.  The 2003 iMac is the last one before they switched to the intel chip.  It's Mac OS is version 10.5.4.  That's as late as I can get it as they quit supporting the old chip after that.
    I found a vid on mac-to-mac file migration online.  It said to connect the two computers via firewire cable (done), start the new computer (done), start the old computer while holding down the T-key (done), and the old computer's hard drive will show up on the new computer finder window (did happen).  Then it says to start Migration Assistant on the new computer (done), and follow directions.  That's where I run into a problem.  The Migration Assistant says "Looking for other computers" and it never finds the old iMac even though the old iMac's hard drive is visible in the new iMac's finder window.  Note that I can click down through directories on the old iMac in the new iMac's finder window.
    Any suggestions you can offer would be greatly appreciated.
    Thanks much!

    Your old machine may too old for Migration Assistant to work. In that case your best bet is to set up the old machine in Target Disk Mode and then drag and drop your files to the new machine. You should only migrate data files, if you have applications on the old machine these should be manually installed on the new machine. If any of the old machine's apps are PPC (Power PC) based these will not run in Lion and will need to be upgraded or replaced prior to installing on the new machine. You can check what apps are PPC based by opening System Profiler (Applications - Utilities - System Profiler), click Applications on the left and then look in the Kind column. Applications that will run in Lion OK are Intel & Universal apps. 

  • How do you connect edge inspect with chrome !?

    how do you connect edge inspect to chrome

    If you install the Chrome extension then Edge Inspect will syncronize with whichever page is in the current tab.
    =Ryan
    [email protected]

  • How do you connect your macbook pro to a sony bravia tv with a belkin cord????? HELP!!!!!!!!!!!!!!!

    How do you connect you macbook pro to a Sony Bravia tv with a Belkin cord!?!?!?!?!?!?!? We know how to set it up, but what setting do you put your tv on!?!?!? we have tried everything, but it wont work!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Well, I have connected my mbpr directly to a Sony Bravia using an hdmi cable, then set the tv to use the corresponding input port, and it works just fine. Have also connected via airplay -> appletv -> tv (with the last connection via an hdmi cable), which also works fine.

  • How do you connect two Apple ID's?

    How do you connect two Apple ID's to one another?

    Yes. You can sync multipl iDevices on the same computer using the same Apple ID. You can each have different configurations of apps, books, music, etc. or have identical configurations. In this way, however, your common data - contacts, mail, calendar will be the same on both iDevices.
    The Apple ID doesn't distinguish one phone from another, only how the phone will sync to a computer. The Apple ID is how iTunes knows to which computer a phone syncs. And, the Apple ID determines who is the registered owner of downloaded and purchased items via iTunes.

  • How do you connect ipad 2 to itunes library using home sharing

    How do you connect the ipad 2 to the itunes library using home sharing so you can listen on your ipad 2? I've seen directions for the ipad which tell you how to setup home sharing then open ipod and touch library in the left column, but when I hit library, nothing happens. I'm assuming the ipad 2 has something different about it. Any help would be greatly appreciated.
    Thanks.
    PS, the OS is 4.3.3 (just got it but it's not on the os list)

    See iTunes 9- Understanding Home Sharing and iTunes- Troubleshooting Home Sharing.  Also, open iTunes, select iTunes Help from the Help menu and search for "home shar."

  • HT1555 how do you connect an iphone to be a remote for Apple TV without the apple remote?

    how do you connect an iphone to be a remote for Apple TV without the apple remote?

    you can use the remote app.
    http://www.apple.com/apps/remote/

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How do you connect your iPad to a wireless computer?

    How do you connect your iPad to a wireless computer?

    Your question makes no sense. You "connect" an iOS device to iTunes on your computer via WiFi or by using the supplied cable.

  • Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

    Contentmom6 wrote:
    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
    Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store.  Now try System Preferences > Displays > Detect Displays.  You should now be able to select a display mode for the monitor.  If it still doesn't work, then I'd check that everything is properly connected.  I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
    Bob

  • How can you connect your iPod touch to your Vista computer without using Apple Software

    How do you connect an iPod touch to your Vista computer without using any Apple products

    There is no other legit way to sync your iPod than using iTunes. There is 3rd party software to transfer content from the iPod to your computer, but not from the computer to your iPod.
    Disk mode is not supported.
    See also: http://www.apple.com/ipodtouch/specs.html

  • I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

    I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

    http://support.apple.com/kb/ts1538

  • How do you connect a microphone to a Mac?

    How do you connect a microphone to the Mac?  I'm trying to record vocals onto Garage Band.  I tried to use an adapter (XLR to MONO 3.5 mm) to connect directly to the port on the side of the MacBook Pro.

    I prefer USB mics - a really cool and nice one that I used to have was the Blue Snowball, available at Amazon for a great price. It got lost in a move but I intend on getting another.
    Clinton

  • How do you connect air to a projector

    How do you connect the air to a projector, what cable do you need.

    It depends on what type of connector the projector has, but basically you will most likley need a Mini-Displayport to HDMI, VGA or DVI connector.  With that you should be able to use a "standard" cable from the projector to the computer.
    As I recall, Amazon also stocks a Mini-Displayport to HDMI cable that would be a single cable--but it would require a projector that will take HDMI input.  Many newer projectors have that connection, but older ones will not.
    If you are hooking to multiple projectors the VGA option right now is the one that will work in virtually all cases--even if the projector has another connector, it almost always has a VGA connection to deal with older laptops.

Maybe you are looking for

  • Use of "Open FPGA VI Reference" function --- Build Specification vs VI vs Bitfile

    When using the "Open FPGA VI Reference" function in a LV2012 cRIO application, there are 3 options: Build Specification, VI, or Bitfile. What would be the reasons for selecting one over the others? Does it affect the resulting startup.rtexe when the

  • Doubt in File to idoc scenario

    Hi All, My scenario is to post the Customer Master Idoc  in R/3 from file. XI configuration has done and R/3 settings were made and i am able to see the idoc in R/3 but it is with error saying that "Account group in the IDoc is different". Kindly sug

  • Runtime Error - DBIF_RSQL_INVALID_RSQL - Too many OPEN CURSOR

    When I try to train a Decision Tree Model via an APD process in RSANWB, I get a runtime error when my model is configured with too many parameter fields or too many leaves (with 2 leaves it works, with more it fails). By searching SAP Notes I see tha

  • How to design insertion and report for customers

    I develop a web application in which I provide a web interface for inserting a customer. I model this customer as a class and provide its attributes. I have functions like addCustomer that inserts a customer's details in DB and getDetails() that retu

  • 8120 call list and email list resets

    I have a Pearl 8120 and the call list and email / SMS list keeps resetting.  It's fairly frustrating since I can't retain emails for long or return some calls. The software is up to date and I'm using Desktop 6 (just downloaded). Any tips would be ap